Hacking 2ds error calibration 3d setup

[sbengu]

Hi guys,my problem is that my 2ds when i turn on ask me to setup the 3d calibration.can you please help me to solve it? I don't have cubic ninja but i have a r4i 3ds rts card if is useful.

 

[EmanueleBGN]

You followed the wrong guide: if you have a backup of your previous NAND, reinstall it and downgrade to the right firmware (more than 6.x).
If you need a guide in Italian, you can find it here: https://wp.me/pMgMI-34P

 

[sbengu]

Which i guide i should follow? I don' have any backup..

 

[EmanueleBGN]

Enter in Recovery mode: press and hold A+R+L+Up(cross) while you boot the 2DS.
> This will UPDATE your consolle!
Check here ( http://wp.me/PMgMI-3c5 ) if your R4i is in the compatible flashcard list; then install NTRboot on it; then follow the guide to install a Custom Firmware

 

[sbengu]

I try to update but can't do it because gives me error

 

[EmanueleBGN]

Which error?
Is your 2DS connected to the Internet?

 

[einhuman197]

Follow 3ds.guide to Flash ntrboothax to your card. After that, do a ctrnandtransfer. This will fix it

 

[sbengu]

Which error?
Is your 2DS connected to the Internet?

An error has occured,unable to update.

 

[sbengu]

Follow 3ds.guide to Flash ntrboothax to your card. After that, do a ctrnandtransfer. This will fix it

i did the flash to my card but how can i do a ctrnandtransfer without the installation of boot9strap?

 

[Quantumcat]

i did the flash to my card but how can i do a ctrnandtransfer without the installation of boot9strap?

Install boot9strap and run GodMode9 as a Luma payload.

 

[sbengu]

Install boot9strap and run GodMode9 as a Luma payload.

i tried to do that but when i turn on my 2ds in sleep mode pushing select+start+x nothing happens

 

[Quantumcat]

i tried to do that but when i turn on my 2ds in sleep mode pushing select+start+x nothing happens

Does the console turn itself off (blue light going on then off)? Or never turn on?
Is the card flashed properly?

 

[sbengu]

Does the console turn itself off (blue light going on then off)? Or never turn on?
Is the card flashed properly?

i did the configuration of luma...what's next?

 

[The Real Jdbye]

i did the configuration of luma...what's next?

Get a ctrtransfer image with 3Down and flash it using GodMode9. I'm not sure exactly how to do that in GM9 though.

 

[sbengu]

Get a ctrtransfer image with 3Down and flash it using GodMode9. I'm not sure exactly how to do that in GM9 though.

i try to turn on pushing start for godmode 9 but my 2ds always ask me to calibrate 3d..

 

[Majickhat55]

i try to turn on pushing start for godmode 9 but my 2ds always ask me to calibrate 3d..

https://gbatemp.net/threads/2dsaver-beta-fix-your-2ds-format-brick-testers-needed.457828/

Try that.

EDIT: Nevermind, it only works on systems lower than 7.xx (2DS). If you're using a NEW 2DS then it should work >11.4..... If you're already on 11.6 then it won't work at all.

--------------------- MERGED ---------------------------

So find a CTRNAND transfer for a low firmware, and that should fix it. That's basically your only option since you can't install CIAs at the moment.

Get a ctrtransfer image with 3Down and flash it using GodMode9. I'm not sure exactly how to do that in GM9 though.

3Down doesn't have CTR transfers for that low of firmware.... The oldest is 11.2 (the guide's is 9.2), when he needs one for 7.xx. He'd have to get someone to downgrade their firm and create a new CTRNNDTransfer for him to go that low.

 

[sbengu]

https://gbatemp.net/threads/2dsaver-beta-fix-your-2ds-format-brick-testers-needed.457828/

Try that.

EDIT: Nevermind, it only works on systems lower than 7.xx (2DS). If you're using a NEW 2DS then it should work >11.4..... If you're already on 11.6 then it won't work at all.

--------------------- MERGED ---------------------------

So find a CTRNAND transfer for a low firmware, and that should fix it. That's basically your only option since you can't install CIAs at the moment.

3Down doesn't have CTR transfers for that low of firmware.... The oldest is 11.2 (the guide's is 9.2), when he needs one for 7.xx. He'd have to get someone to downgrade their firm and create a new CTRNNDTransfer for him to go that low.

i don't have cubic ninja..i don't know what to do anymore..

 

[BL4Z3D247]

3Down doesn't have CTR transfers for that low of firmware.... The oldest is 11.2 (the guide's is 9.2), when he needs one for 7.xx. He'd have to get someone to downgrade their firm and create a new CTRNNDTransfer for him to go that low.

Edit: Misread your post.

 

[sbengu]

Edit: Misread your post.

i did a ctrtransfer but now my system remain black..no more 3d calibration..

 

[einhuman197]

Can you still boot into godmode9 fine? Try booting into recovery mode.