Hardware For those suffering from left Joycon issues, soldering a wire will fix the issue.
- Thread starter delete12345
- Start date
- Views 6,771
- Replies 38
- Likes 2
If you watch the video carefully and listen to what he's describing, there's really no way you could get it wrong, assuming you're competent with the soldering. I don't have a Switch but watching the video I could see where the trace ran from the built-in (i.e. in the PCB) antenna back to the solder point on the board. Simple mod, but like he says not necessary unless you're really having problems with that particular joycon. He definitely proved his concept though - the 'problem' joycon worked better than the 'good' one after the mod.
If that's all it takes to fix these Joy-Cons Nintendo really should do a recall.
I'm more then competent with soldering...
The thing is with videos is that they usually unclear and quickly outdated (see AL9H vid tutorials)
The best kind of tutorials are the ones with text and pictures, so that the people can LEARN from it instead of execute it as a mindless zombie.
I've done tons of trace repairs on a variety of consoles.
I agree, but he just published the video on YT today. I'm sure someone will document it better, maybe come up with a better execution. The mod is about as simple as it gets though - it is quite literally 'attach a short wire here, tuck it out of the way here.'
One thing worth noting - in the video he had a couple ribbon cables detached from their connectors, for no reason as far as I can see. Doesn't look like they need to be detached for this mod. I assume he had just been tinkering about and hadn't put everything back together yet, but he should have had the joycon in the exact state a novice would need to disassemble to in order to perform the mod, no more. (So yeah, you're right that this video isn't ideal.)
Last edited by Hanafuda,
Fuck awesome! Once nintendo fixes the manufacturing process I can just go buy new joycons, swap them with the stock ones I have and return them haha! So glad it's not the console itself.
When you need to solder some extra wires into your controller and everyone is okay with it there is something wrong with everyone -.-V
Deffo!
That's also one of the problems with videos, they can be manipulated or turn out unclear due to actions being done on the board.
Still pictures are still the best, have been for years.
If it was up to me, schematics and text ;p
Nintendo probably tested the thing in Japanese living rooms, sitting 3 feet from the television. You ever see the controller cords on old-school Japanese consoles? Shorter than your arm.
It's a concept video. This is how shit gets done in the real world. Refining the process comes afterwards. I have 10 years in the manufacturing industry. I loved this video, the only thing missing from it was the before test to show the range delta. If you need a picture book to do what he just did then you have no business doing this.
Yes I had issues with the left joycon. I am at most 5 feet from the console, and I was using them separate in each hand. When my knee partially blocked the left joycon it would lose all connectivity. Never had one issue with the right controller. They are now attached to the console permanently and I am using a pro controller when docked. Pro controller has worked phenomenally, I highly recommend it.
That's honestly what I expected to hear after a couple weeks from now ... crickets. Remember when the press was going wild with warnings that Wiimotes were deadly projectiles, being accidentally hurled by players, destroying TV's and cracking skulls? Resulted in the silicone Wiimote condoms.
If you mean because I haven't bought a Switch yet, you're right. I gave up on being an early adopter / tester for Nintendo a long time ago. If it's a legit issue, as you say, it will either be resolved by the holidays (when I might buy one), or else I now know there's an easy DIY fix.
OK. Good to know. I just expected a lot more talk about the problem after release if it was widespread problem. So I was wondering.
I am sittingg about 3 meters away but probably my knees don't block.
Last edited by orcid,
Yeah, I've had some left joycon issues of my own. Granted my Switch is positioned next to a bunch of wires, which Nintendo recommends against due to interference of the joycon signals. Anyways, sitting on my couch with controller in my lap, I get intermittent issues, but if I just raise it up a little bit (as my Switch is on a countertop) the issue goes away.
-
@
The Real Jdbye:
@SylverReZ if you could find a v5 DS ML you would have the best of both worlds since the v5 units had the same backlight brightness levels as the DS Lite unlockable with flashme -
-
-
@
BigOnYa:
A woman with no arms and no legs was sitting on a beach. A man comes along and the woman says, "I've never been hugged before." So the man feels bad and hugs her. She says "Well i've also never been kissed before." So he gives her a kiss on the cheek. She says "Well I've also never been fucked before." So the man picks her up, and throws her in the ocean and says "Now you're fucked."+2 -
-
-
@
BakerMan:
anyways, we need to re-normalize physical media+1
if i didn't want my games to be permanent, then i'd rent them -
@
BigOnYa:
Agreed, that why I try to buy all my games on disc, Xbox anyways. Switch games (which I pirate tbh) don't matter much, I stay offline 24/7 anyways.+1
-
-
@
cearp:
@BakerMan - you can still "own" digital media, arguably easier and better than physical since you can make copies and backups, as much as you like.+1
The issue is DRM -
@
cearp:
You can buy drm free games / music / ebooks, and if you keep backups of your data (like documents and family photos etc), then you shouldn't lose the game. but with a disk, your toddler could put it in the toaster and there goes your $60
-
-
@
rqkaiju2:
i like physical media because it actually feels like you own it. thats why i plan on burning music to cds -
-
-
@
SylverReZ:
@rqkaiju2, Physical media is a great source for archiving your data, none of that cloud storage shiz.+1 -
-
-
-
@
BakerMan:
guys, should i change my pfp to one of these or keep it the same?
(i guess i could change it to one of my other pfps too, but i just want to see what you guys think first) -
-
-
-
-
. Saves on time, soap, water and money having to wash them.