Hardware AKNES here, Answer questions about our brand.

AKNES

Well-Known Member
OP
Member
Joined
Mar 27, 2023
Messages
289
Trophies
0
Age
31
XP
1,276
Country
China
Why is 8bitdo overrated Chinese garbage? 8bitdo is the same quality as $15-25 no name generic controllers.
The cost of some products is difficult to see too much difference on the surface.
For example, the cost of conductive adhesive for 8BitDo's D-Pad is relatively high, because it uses better materials. What's more, 8BitDo's products are strictly controlled in QC, which also requires cost, but in exchange for a lower defective rate, it also prolongs the life of the product.
So the difference of some controllers, when we first got it, we didn't feel much difference. But the longevity and stability of the product, among many other things, can only be discovered as we use it over time.
In addition, for functional products, there will be some functions that are not clearly indicated in the manual, causing users to misunderstand or not use them normally, and there is no good after-sales support, which makes things worse. This is also where we sellers need to improve.
If you have purchased any of these brands and had a bad experience, I can help as much as I can.:grog:
 
  • Like
Reactions: impeeza

Chaoticus

Well-Known Member
Member
Joined
Jan 10, 2020
Messages
105
Trophies
0
Age
42
XP
378
Country
United States
Why is 8bitdo overrated Chinese garbage? 8bitdo is the same quality as $15-25 no name generic controllers.
If they put Hall Effect sensors in the 8-Bitdo controllers that takes care of this..
For example, the cost of conductive adhesive for 8BitDo's D-Pad is relatively high, because it uses better materials.
Yes in turn means more expensive controller either way. Given choice I'm sure 8-Bitdos WITH Hall Effect Sensors would outsell the cheaper Conductive adhesive versions.
 
  • Like
Reactions: AKNES

AKNES

Well-Known Member
OP
Member
Joined
Mar 27, 2023
Messages
289
Trophies
0
Age
31
XP
1,276
Country
China
If they put Hall Effect sensors in the 8-Bitdo controllers that takes care of this..

Yes in turn means more expensive controller either way. Given choice I'm sure 8-Bitdos WITH Hall Effect Sensors would outsell the cheaper Conductive adhesive versions.
Yes, you're right.
Hall Joysticks are also one of the factors that lead to higher costs.
But all good materials or good designs are for users to get a better experience.
It is not to say that the products we design are the most perfect, but we pursue better.
 

Chaoticus

Well-Known Member
Member
Joined
Jan 10, 2020
Messages
105
Trophies
0
Age
42
XP
378
Country
United States
Yes, you're right.
Hall Joysticks are also one of the factors that lead to higher costs.
But all good materials or good designs are for users to get a better experience.
It is not to say that the products we design are the most perfect, but we pursue better.
Funny you say that too! I'm not complaining but I will point this out for the other reading this board: I bought a couple pairs of the drop in replacements for my Switch Joy-cons and 1 out of 4 so far has an ever so slightly... I won't call it a click sound, more of like a spring's tension when twisted just slightly will produce this spring fatigue like sound/feeling. But in all honesty it doesn't effect my game play at all! It doesn't bother me in the slightest, hence why I originally ask about the branching out to older consoles. Take a vote today I'm willing to bet you'd find a damned good market replacing N64 on up.

Anybody want a 64 controller with Hall Effect Sensors?? YUP

GameCube? ABSOLUTELY!

PS 1&2? YOU KNOW IT!

OG Xbox? Fuckin A I DO!

You would get my business just on those 5 other products alone!! Now times that by at least two (most of us at least have two controllers) and up to four for the N64, Game Cube and OG Xbox!
 
  • Like
Reactions: Jayro and AKNES

AKNES

Well-Known Member
OP
Member
Joined
Mar 27, 2023
Messages
289
Trophies
0
Age
31
XP
1,276
Country
China
Funny you say that too! I'm not complaining but I will point this out for the other reading this board: I bought a couple pairs of the drop in replacements for my Switch Joy-cons and 1 out of 4 so far has an ever so slightly... I won't call it a click sound, more of like a spring's tension when twisted just slightly will produce this spring fatigue like sound/feeling. But in all honesty it doesn't effect my game play at all! It doesn't bother me in the slightest, hence why I originally ask about the branching out to older consoles. Take a vote today I'm willing to bet you'd find a damned good market replacing N64 on up.

Anybody want a 64 controller with Hall Effect Sensors?? YUP

GameCube? ABSOLUTELY!

PS 1&2? YOU KNOW IT!

OG Xbox? Fuckin A I DO!

You would get my business just on those 5 other products alone!! Now times that by at least two (most of us at least have two controllers) and up to four for the N64, Game Cube and OG Xbox!
Wow! You are definitely an objective and rational person, a very good person.
Yes, including myself when using GuliKit Hall Joystick, I also found that sometimes or some joysticks, there will be a little bit of abnormal noise like what you said, similar to the spring work. Then when I went to the calibration page and observed, it does not currently affect the normal operation of the joysticks. (These words are spoken truthfully, not justifying my status as a seller.)
But we also reported this to GuliKit, and in future production, we will see if this small problem is also solved. But I don't know how to solve it technically and how long it will take.
As you said, extending the Hall technology to other controllers, yes, we have been researching. But compared to Steam Deck and Switch joycon, the joysticks of other controllers are particularly difficult (if you have opened the shell of this type of controller to see the structure inside them). This involves both software and hardware, and we need time to study their operability and commercialization.
In any case, GuliKit has been keeping research on how to popularize Hall technology to more aspects.
 

Chaoticus

Well-Known Member
Member
Joined
Jan 10, 2020
Messages
105
Trophies
0
Age
42
XP
378
Country
United States
Wow! You are definitely an objective and rational person, a very good person.
Yes, including myself when using GuliKit Hall Joystick, I also found that sometimes or some joysticks, there will be a little bit of abnormal noise like what you said, similar to the spring work. Then when I went to the calibration page and observed, it does not currently affect the normal operation of the joysticks. (These words are spoken truthfully, not justifying my status as a seller.)
But we also reported this to GuliKit, and in future production, we will see if this small problem is also solved. But I don't know how to solve it technically and how long it will take.
As you said, extending the Hall technology to other controllers, yes, we have been researching. But compared to Steam Deck and Switch joycon, the joysticks of other controllers are particularly difficult (if you have opened the shell of this type of controller to see the structure inside them). This involves both software and hardware, and we need time to study their operability and commercialization.
In any case, GuliKit has been keeping research on how to popularize Hall technology to more aspects.
Take your time researching these things! Once you get them right get them to market!!
 
  • Like
Reactions: AKNES

nWo

The Game Master
Member
Joined
Oct 20, 2016
Messages
1,001
Trophies
0
Website
www.facebook.com
XP
2,904
Country
Mexico
I just want to say that, from all my experience and all the different gaming brands I have been a customer of, (PDP, Retro Bit, PowerA, Niko, etc) 8BitDo have been a complete ASS when it comes to warranty. Two controllers resulted faulty and when I contacted them, they asked me photos, proof of purchase. After that, they asked for a video, and okay, I send them the video. Then again the proof of purchase, video of the PC opening the proof of purchase, videos of the control with the issue, etc. They took away a good 5 hours of my life between photos, videos, emails and whatnot. In the end, they said that they could offer me just a 30 % discount on a new purchase on their website. It was really annoying and I lost money and more importantly, time of my life while these bufoons played with me. Is just not fair. They are the only gaming accesories company that have treated me like trash. It is a shame, really.
 
  • Like
Reactions: AKNES

AKNES

Well-Known Member
OP
Member
Joined
Mar 27, 2023
Messages
289
Trophies
0
Age
31
XP
1,276
Country
China
I just want to say that, from all my experience and all the different gaming brands I have been a customer of, (PDP, Retro Bit, PowerA, Niko, etc) 8BitDo have been a complete ASS when it comes to warranty. Two controllers resulted faulty and when I contacted them, they asked me photos, proof of purchase. After that, they asked for a video, and okay, I send them the video. Then again the proof of purchase, video of the PC opening the proof of purchase, videos of the control with the issue, etc. They took away a good 5 hours of my life between photos, videos, emails and whatnot. In the end, they said that they could offer me just a 30 % discount on a new purchase on their website. It was really annoying and I lost money and more importantly, time of my life while these bufoons played with me. Is just not fair. They are the only gaming accesories company that have treated me like trash. It is a shame, really.
This is really annoying.
Maybe 8BitDo's official after-sales policy is different from ours, I can't comment on this aspect.
If you want to experience 8BitDo, GuliKit or RetroFlag products, you can try AKNES. Same product, some extras at the same price, different customer service.:shy:
 

slaphappygamer

Well-Known Member
Member
Joined
Nov 30, 2008
Messages
4,133
Trophies
2
Age
46
Location
California
XP
7,688
Country
United States
Do you know of any plans to release hall effect joysticks for Switch Pro controller replacement? Both of my sticks are drifting and I really dont want to buy a new gamepad, though if I did, it would be the Gulikit Kingkong Pro 2. I just really like fixing things I already own. It makes me feel good.
 
  • Like
Reactions: AKNES

AKNES

Well-Known Member
OP
Member
Joined
Mar 27, 2023
Messages
289
Trophies
0
Age
31
XP
1,276
Country
China
Do you know of any plans to release hall effect joysticks for Switch Pro controller replacement? Both of my sticks are drifting and I really dont want to buy a new gamepad, though if I did, it would be the Gulikit Kingkong Pro 2. I just really like fixing things I already own. It makes me feel good.
There is no breakthrough news at the moment, so there may not be related products for several months.
 
  • Like
Reactions: slaphappygamer

Badablek

Well-Known Member
Member
Joined
Jan 23, 2006
Messages
519
Trophies
1
Age
43
XP
2,930
Country
France
It's the new version from AKNES-EU without clicking. And if you have any issue after purchase, please contact me or my workmate on Amazon. Customers' satisfy is our first priority.

I'm sorry to inform you this is not true @AKNES ...just bought 2 pairs yesterday, from AKNES-EU, all 4 joy are from the bad batch :sleep:
 
Last edited by Badablek,

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
  • K3Nv2 @ K3Nv2:
    I'll reformat and have a 3tb raid0 m. 2 at least
    +1
  • K3Nv2 @ K3Nv2:
    Lmao that sold out fast
    +1
  • Veho @ Veho:
    Yeet the cat.
    +1
  • K3Nv2 @ K3Nv2:
    Good idea
    +1
  • The Real Jdbye @ The Real Jdbye:
    i thought everybody knew cocktails are like 75% ice
  • Veho @ Veho:
    Yeah but not like this.
  • Veho @ Veho:
    It's not like they're complaining that their Slurpee is 99% ice or something, but if the cocktail calls for "shot of vodka, shot of vermouth, shot of gin, shot of Campari, three shots of juice, squirt of lemon" and ends up being a thimbleful of booze, that's a problem.
  • The Real Jdbye @ The Real Jdbye:
    the funny thing is cocktails in norway are only allowed to have 1 20ml shot of booze
  • The Real Jdbye @ The Real Jdbye:
    so..... yeah
  • The Real Jdbye @ The Real Jdbye:
    we're used to only having a thimbleful of booze
  • Veho @ Veho:
    Booo.
  • The Real Jdbye @ The Real Jdbye:
    same thing if you want whisky on the rocks or something, you can't get a double
  • The Real Jdbye @ The Real Jdbye:
    but you could buy as many shots of whisky (or anything else) as you want and ask for a glass of ice and pour them in
  • The Real Jdbye @ The Real Jdbye:
    it's dumb
  • Veho @ Veho:
    Maybe.
  • Veho @ Veho:
    There was a comparison of the number of Ibuprofen poisonings before and after they limited the maximum dosage per box or per pill (i'll look that up). No limit on the number of boxes you can still buy as many as you want, so people argued it was pointless.
  • Veho @ Veho:
    But the number of (accidental) poisonings dropped because drinking an entire package of ibuprofen pills went from "I need a new liver" to "I need a new box of Ibuprofen".
  • Veho @ Veho:
    Here we have ketoprofen that used to be prescription-only because of the risk of toxic dosages, but then they halved the dose per pill and sell them in bottles of six pills apiece instead of twenty and it doesn't need a prescription any more. Yes you can buy more than one bottle but people simply don't.
  • Psionic Roshambo @ Psionic Roshambo:
    Usually accidentally overdose of ibuprofen here is from people taking like cold medicine then ibuprofen for a headache and the combination is over what they need
    Veho @ Veho: https://imgur.com/gallery/QQkYnQu