X99 Pc Problem

Discussion in 'Computer Hardware, Devices and Accessories' started by Bernhard, Feb 18, 2017.

  1. Bernhard
    OP

    Bernhard BorderPsycho

    Member
    354
    42
    May 2, 2016
    United States
    my pc is ... unstable since june 2016... and i ve tested every thing mem86 didnt work...and other things didnt work... blabla..
    adobe premier freezes... and tje system seems to be slow sometimes...
    i ve got an i7 5930k
    gpu strix 980ti
    motherboard: Asus rampage v edition 10
    ram: Gskill Tridentz 3200mhz 32gb
    ssd 250gb samsung...
    psu sorsair axi860

    lets get to the problemes i ve ... ...
    • Computer turns on, no beeps, no screen. Does not POST (Power-On Self Test)
    • Computer turns on, fans run at highest speeds, still no POST, and operating system not loading.
    • Computer powers on, but turns off immediately.
    • The pc freezes during work processes or after awaiking from.sleep...
    • pc freezes during games..
    • sometimes only blackscreen and i can get into taskmanager
    • bluscreen after logging in...sometimes!
    • pc can be errorfree for one week.. or ya ...for 4 on and off periods
    .. the problem is not the gpu and not the ram and not the motherboard! what sympthomes can a bad cpu have?
    i ve tested the pc.unplugged from.case
    and i ve selftested the psu!
    i ve unplugged every hdd... and nothing changed!

    i am curious... cause i guess i found the bad pc part.. i think it s the cpu now...

    i am not sure.. and now i neeed your help!
    pls help me! take some time and help me... i am trying to find the problem for 5moths now.-.- and it s****... :(
     


  2. Joe88

    Joe88 [λ]

    Member
    11,595
    2,822
    Jan 6, 2008
    United States
    NYC
    june 2016...
    thats exactly when my x99 rig fried, coincidence?

    In my case it my be the cpu as well.

    Do you have a psu you can borrow or even a lower end cpu?
     
  3. raystriker

    raystriker Alpha PC Builder

    Member
    1,263
    409
    Dec 28, 2011
    India
    Bloomington
    I think you'd get a better, more accurate answer from the big boys forum at https://linustechtips.com/main/
    They all probably have or have had your specs, good luck.
     
  4. Bernhard
    OP

    Bernhard BorderPsycho

    Member
    354
    42
    May 2, 2016
    United States

    dam how did you manage to frie your motherboard? :(RIP :(

    yes.. i ve another psu .. but it s built in my mini itx xD and it s a non modularone...:(
    soo its difficult to put it out ...

    nope no one in my friendslist got a cpu for x99 :/... and yaaa...
    and nope i dont have another cpu...:/

    i ll try this out after there s no way out ...^^ i hope you guys can help.me! :(
     
  5. mahzero

    mahzero Newbie

    Newcomer
    1
    0
    May 19, 2006
    from what I read about your problems , I have two questions

    1- did you try a fresh install of your OS ?
    2- some of your problems appears to be BIOS related , Did you try to reset BIOS ? are you overclocking CPU ? RAM ?
     
  6. Originality

    Originality Chibi-neko

    Member
    5,341
    780
    Apr 21, 2008
    London, UK
  7. Bernhard
    OP

    Bernhard BorderPsycho

    Member
    354
    42
    May 2, 2016
    United States

    short answers:
    Yes and yes :/... i ve tried that too...

    thank ya for the 3 links u posted ^^ !

    i ve even now ... no idea which part could be bad... and which part could cause the problemes ... puh.. i am nearly ready to sell my pc parts... -.- it kinda sucks... i ve to say
     
  8. Westwoodo

    Westwoodo GBAtemp Regular

    Member
    104
    11
    Jan 14, 2015
    Try reseating your cpu?
     
  9. Bernhard
    OP

    Bernhard BorderPsycho

    Member
    354
    42
    May 2, 2016
    United States
    i ve tried that... i bought a new mobo and i reseated it ! ...
    the only thing that could be possible is a bad cpu.... and this sucks.. cause x99 cpus are expensive
     
  10. Armadillo

    Armadillo GBAtemp Psycho!

    Member
    3,586
    1,551
    Aug 28, 2003
    United Kingdom
    rma it then.

    Intel have a good rma service.
     
  11. Westwoodo

    Westwoodo GBAtemp Regular

    Member
    104
    11
    Jan 14, 2015
    Only way to find out is to change the chip or post a ad on craigs list asking for someone else who has one that you could try?
     
  12. Bernhard
    OP

    Bernhard BorderPsycho

    Member
    354
    42
    May 2, 2016
    United States
    soo guys! i ve now unplugged my cpu... and i took a few pictures! i hope you guys can tell me if the pins of the socket are broken/bent... would be nice of you!

    i ll upload them right now! :)
     
    Last edited by Bernhard, Feb 21, 2017
  13. Bernhard
    OP

    Bernhard BorderPsycho

    Member
    354
    42
    May 2, 2016
    United States
  14. Originality

    Originality Chibi-neko

    Member
    5,341
    780
    Apr 21, 2008
    London, UK
    To answer the question, no, the pins do not look bent. They look fine to me.

    Edit: also note that double posting is against the rules. Edit your previous post rather than posting again.
     
  15. Bernhard
    OP

    Bernhard BorderPsycho

    Member
    354
    42
    May 2, 2016
    United States
    okay thank ya!
    and what do you think bout the cpu?
    i ll watch my doubleposting thanks:)!
     
  16. Donzej

    Donzej Newbie

    Newcomer
    2
    0
    May 9, 2017
    United States
    I had the same problem, unplug all sata except for your install drive. Especially if you're using an M.2, but if not it's still important. X99s suck ass with determining boot drives.
    After that DO NOT use an install CD for your mobo updates, go to the website and install them (unzip them) once you get WinZip or winrar.
    After that you should be good to connect your storage drives. If you still get issues check the boot sequence and boot overrides in bios.
    Hope this helps, it sounds exactly what like what I had gone through.
     
    Last edited by Donzej, May 9, 2017
  17. Bernhard
    OP

    Bernhard BorderPsycho

    Member
    354
    42
    May 2, 2016
    United States
    for me the x99 build just died, now it is dust safe wrapped in plastic ... because the adobe programs dont work well... i ve bought myself the x99 only for rendering ... i need them... but i ve done everything... i ve now another cpu for the build ( post works booting works.. and so on) but i need it to render my files and this doesnt work... so i need to spend some money on another cpu... not the 5930k i am thinking in buying a 6900k i guess.... but lets see if the cpu is the actual problem...
    the preview doesnt work well in premiere and in aftereffects ... and yeah i am just angry now everything seems working except ...the programs i need for university
     
    Last edited by Bernhard, May 9, 2017
  18. iAqua

    iAqua feel the... envy.

    Member
    GBAtemp Patron
    iAqua is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    2,721
    2,214
    Dec 7, 2015
    Canada
    *Ryzen glares from the corner of the room*
    You should try clearing your cmos and resetting windows, you never know. Or atleast run those adobe apps in some instance other then windows.
     
  19. Bernhard
    OP

    Bernhard BorderPsycho

    Member
    354
    42
    May 2, 2016
    United States
    i ve done all this before... so i am really frstrated... i ve done all this several times ...
    but thank you for at least mention this
     
    iAqua likes this.
  20. Bernhard
    OP

    Bernhard BorderPsycho

    Member
    354
    42
    May 2, 2016
    United States
    i really think i should sell my x99 ... all those fucking parts :'( and build my self a ryzen pc for rendering :( it hurts ... it hurts so dam much