Hardware X99 Pc Problem

[Bernhard]

my pc is ... unstable since june 2016... and i ve tested every thing mem86 didnt work...and other things didnt work... blabla..
adobe premier freezes... and tje system seems to be slow sometimes...
i ve got an i7 5930k
gpu strix 980ti
motherboard: Asus rampage v edition 10
ram: Gskill Tridentz 3200mhz 32gb
ssd 250gb samsung...
psu sorsair axi860

lets get to the problemes i ve ... ...

• Computer turns on, no beeps, no screen. Does not POST (Power-On Self Test)
• Computer turns on, fans run at highest speeds, still no POST, and operating system not loading.
• Computer powers on, but turns off immediately.
• The pc freezes during work processes or after awaiking from.sleep...
• pc freezes during games..
• sometimes only blackscreen and i can get into taskmanager
• bluscreen after logging in...sometimes!
• pc can be errorfree for one week.. or ya ...for 4 on and off periods

.. the problem is not the gpu and not the ram and not the motherboard! what sympthomes can a bad cpu have?
i ve tested the pc.unplugged from.case
and i ve selftested the psu!
i ve unplugged every hdd... and nothing changed!

i am curious... cause i guess i found the bad pc part.. i think it s the cpu now...

i am not sure.. and now i neeed your help!
pls help me! take some time and help me... i am trying to find the problem for 5moths now.-.- and it s****...

 

[Joe88]

june 2016...
thats exactly when my x99 rig fried, coincidence?

In my case it my be the cpu as well.

Do you have a psu you can borrow or even a lower end cpu?

 

[raystriker]

I think you'd get a better, more accurate answer from the big boys forum at https://linustechtips.com/main/
They all probably have or have had your specs, good luck.

 

[Bernhard]

june 2016...
thats exactly when my x99 rig fried, coincidence?

In my case it my be the cpu as well.

Do you have a psu you can borrow or even a lower end cpu?

dam how did you manage to frie your motherboard? RIP

yes.. i ve another psu .. but it s built in my mini itx xD and it s a non modularone...
soo its difficult to put it out ...

nope no one in my friendslist got a cpu for x99 :/... and yaaa...
and nope i dont have another cpu...:/

I think you'd get a better, more accurate answer from the big boys forum at https://linustechtips.com/main/
They all probably have or have had your specs, good luck.

i ll try this out after there s no way out ...^^ i hope you guys can help.me!

 

[mahzero]

from what I read about your problems , I have two questions

1- did you try a fresh install of your OS ?
2- some of your problems appears to be BIOS related , Did you try to reset BIOS ? are you overclocking CPU ? RAM ?

 

[Originality]

For those who want to try and see what he has already tried and tested, have a quick read of the other three threads about this same system and same problem.

https://gbatemp.net/threads/how-to-test-ram-in-a-x99-motherboard.457295/

https://gbatemp.net/threads/ram-or-cpu-problems.458600/

https://gbatemp.net/threads/real-pc-problems-that-i-can-not-fix-for-my-own-please-help.456780/

 

[Bernhard]

from what I read about your problems , I have two questions

1- did you try a fresh install of your OS ?
2- some of your problems appears to be BIOS related , Did you try to reset BIOS ? are you overclocking CPU ? RAM ?

short answers:
Yes and yes :/... i ve tried that too...

For those who want to try and see what he has already tried and tested, have a quick read of the other three threads about this same system and same problem.

https://gbatemp.net/threads/how-to-test-ram-in-a-x99-motherboard.457295/

https://gbatemp.net/threads/ram-or-cpu-problems.458600/

https://gbatemp.net/threads/real-pc-problems-that-i-can-not-fix-for-my-own-please-help.456780/

thank ya for the 3 links u posted ^^ !

i ve even now ... no idea which part could be bad... and which part could cause the problemes ... puh.. i am nearly ready to sell my pc parts... -.- it kinda sucks... i ve to say

 

[Westwoodo]

Try reseating your cpu?

 

[Bernhard]

Try reseating your cpu?

i ve tried that... i bought a new mobo and i reseated it ! ...
the only thing that could be possible is a bad cpu.... and this sucks.. cause x99 cpus are expensive

 

[Armadillo]

rma it then.

Intel have a good rma service.

 

[Westwoodo]

i ve tried that... i bought a new mobo and i reseated it ! ...
the only thing that could be possible is a bad cpu.... and this sucks.. cause x99 cpus are expensive

Only way to find out is to change the chip or post a ad on craigs list asking for someone else who has one that you could try?

 

[Bernhard]

soo guys! i ve now unplugged my cpu... and i took a few pictures! i hope you guys can tell me if the pins of the socket are broken/bent... would be nice of you!

i ll upload them right now!

 

[Bernhard]

Here s the Link! i hope it works!

https://imgur.com/gallery/iC18X

--------------------- MERGED ---------------------------

and here s the link for the CPU pictures!

hope you all can help me!

https://imgur.com/gallery/kdjpP

 

[Originality]

To answer the question, no, the pins do not look bent. They look fine to me.

Edit: also note that double posting is against the rules. Edit your previous post rather than posting again.

 

[Bernhard]

To answer the question, no, the pins do not look bent. They look fine to me.

Edit: also note that double posting is against the rules. Edit your previous post rather than posting again.

okay thank ya!
and what do you think bout the cpu?
i ll watch my doubleposting thanks!

 

[Donzej]

I had the same problem, unplug all sata except for your install drive. Especially if you're using an M.2, but if not it's still important. X99s suck ass with determining boot drives.
After that DO NOT use an install CD for your mobo updates, go to the website and install them (unzip them) once you get WinZip or winrar.
After that you should be good to connect your storage drives. If you still get issues check the boot sequence and boot overrides in bios.
Hope this helps, it sounds exactly what like what I had gone through.

 

[Bernhard]

I had the same problem, unplug all sata except for your install drive. Especially if you're using an M.2, but if not it's still important. X99s suck ass with determining boot drives.
After that DO NOT use an install CD for your mobo updates, go to the website and install them (unzip them) once you get WinZip or winrar.
After that you should be good to connect your storage drives. If you still get issues check the boot sequence and boot overrides in bios.
Hope this helps, it sounds exactly what like what I had gone through.

for me the x99 build just died, now it is dust safe wrapped in plastic ... because the adobe programs dont work well... i ve bought myself the x99 only for rendering ... i need them... but i ve done everything... i ve now another cpu for the build ( post works booting works.. and so on) but i need it to render my files and this doesnt work... so i need to spend some money on another cpu... not the 5930k i am thinking in buying a 6900k i guess.... but lets see if the cpu is the actual problem...
the preview doesnt work well in premiere and in aftereffects ... and yeah i am just angry now everything seems working except ...the programs i need for university

 

[iAqua]

for me the x99 build just died, now it is dust safe wrapped in plastic ... because the adobe programs dont work well... i ve bought myself the x99 only for rendering ... i need them... but i ve done everything... i ve now another cpu for the build ( post works booting works.. and so on) but i need it to render my files and this doesnt work... so i need to spend some money on another cpu... not the 5930k i am thinking in buying a 6900k i guess.... but lets see if the cpu is the actual problem...
the preview doesnt work well in premiere and in aftereffects ... and yeah i am just angry now everything seems working except ...the programs i need for university

*Ryzen glares from the corner of the room*
You should try clearing your cmos and resetting windows, you never know. Or atleast run those adobe apps in some instance other then windows.

 

[Bernhard]

*Ryzen glares from the corner of the room*
You should try clearing your cmos and resetting windows, you never know. Or atleast run those adobe apps in some instance other then windows.

i ve done all this before... so i am really frstrated... i ve done all this several times ...
but thank you for at least mention this

 

[Bernhard]

i really think i should sell my x99 ... all those fucking parts :'( and build my self a ryzen pc for rendering it hurts ... it hurts so dam much