Hacking WiiFlow-Mod and Emunand

[hards]

you can everything on single FAT32 partition of only 1 drive say 1-2 TB,
if you want to split you can have 2 partitions ex FAT32 first and NTFS second, then use FAT32 for nands and emulators and GC and use NTFS to store your Wii games

hi i would like to try again , i have hacked the wii console with modmii it cames with a guide it says to Copy everything inside the COPY_TO_USB folder to the root of your FAT32 hard-drive\partition. now in the files that are in the usb drive 1 of them is wbfs , i thought that went on to ntfs , as at the moment i have got 2 partitions on a 2tb drive i have marked 1 up as fat32 nands and the other ntfs for wii games ..
i have also got simple iso patcher 1.14 , can you please advise what i should patch thanks

 

[hards]

hi i have done this guide again and i have got to step 5 when loading a game it says this channel cannot be used ?

 

[Paulo Victor]

Hello guys. I'm having some doubts. After compiling the sneek, I have to open the showmiiwads and select the nand backup path under options right? But in that location must be my nand backup? I did the backup with bootmii and copied the bootmii folders, key and nand to a folder on the computer. I should direct the path of the nand with showmiiwads to it then? Because I want to install ww / vc games. And when I nand extratc to appear the following folders: shared1, sys, ticket and title. Is that right? I have to move them to which folder?

 

[Jedman]

Hi I followed the guide but im using an sd card not a hard drive. When I ty and launch neek2o it hangs on reloading bootmii IOS.

Also I cant see what the benefit of using neek2o is when I can access my emunand though wiiflow and play my virtual console game from their.

 

[Mulsiphix]

I've used ModMii and run through the Sneek install as outlined in this guide (only change is I chose v96 instead of v95). I plug in my USB Hard Drive, plug in the SD card, start it up, load MMM, and when I attempt to install the neek2o_NK2O_1.wad I receive the error "-2011". I found this post which kind of covers what the error means but I have no idea what to do to fix it in this situation.

Questions
1) Anybody know how to fix this problem?
2) Do I install the WAD from the SD card and then go back to using just my USB HD or will neek require the SD card whenever I want to use it?

Not sure if it matters but here is a SysCheck taken today.

Spoiler

sysCheck v2.1.0b19 by Double_A and R2-D2199, Nano
...runs on IOS58 (rev 6176).

Region: NTSC-U
System Menu 4.1U (v449)
Priiloader installed
Drive date: 2008.07.14
Homebrew Channel 1.1.2 running on IOS58

Hollywood v0x11
Console ID: (I removed this info)
Boot2 v4
Found 95 titles.
Found 56 IOS on this console. 6 of them are stub.

IOS3 (rev 65280): Stub
IOS4 (rev 65280): Stub
IOS9 (rev 54321): Trucha Bug
IOS10 (rev 768): Stub
IOS11 (rev 54321): Trucha Bug
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 54321): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS17 (rev 1032): No Patches
IOS20 (rev 54321): Trucha Bug
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 54321): Trucha Bug
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 3072): Stub
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 54321): Trucha Bug
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 54321): Trucha Bug
IOS61 (rev 5662): No Patches
IOS62 (rev 6430): No Patches
IOS70 (rev 54321): Trucha Bug
IOS80 (rev 54321): Trucha Bug
IOS90 (rev 54321): Trucha Bug
IOS202[60] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS222[38] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS223[38+37] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS224[57] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS236 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS245[37] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS246[38] (rev 21008, Info: d2x-v8final): Trucha Bug, ES Identify, NAND Access
IOS247[53] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS248[55] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS249[56] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS250[57] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS251[58] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
BC v6
MIOS v65535

Report generated on 2014/08/27.

 

[AbdallahTerro]

I've used ModMii and run through the Sneek install as outlined in this guide (only change is I chose v96 instead of v95). I plug in my USB Hard Drive, plug in the SD card, start it up, load MMM, and when I attempt to install the neek2o_NK2O_1.wad I receive the error "-2011". I found this post which kind of covers what the error means but I have no idea what to do to fix it in this situation.

Questions
1) Anybody know how to fix this problem?
2) Do I install the WAD from the SD card and then go back to using just my USB HD or will neek require the SD card whenever I want to use it?

Not sure if it matters but here is a SysCheck taken today.

Spoiler

sysCheck v2.1.0b19 by Double_A and R2-D2199, Nano
...runs on IOS58 (rev 6176).

Region: NTSC-U
System Menu 4.1U (v449)
Priiloader installed
Drive date: 2008.07.14
Homebrew Channel 1.1.2 running on IOS58

Hollywood v0x11
Console ID: (I removed this info)
Boot2 v4
Found 95 titles.
Found 56 IOS on this console. 6 of them are stub.

IOS3 (rev 65280): Stub
IOS4 (rev 65280): Stub
IOS9 (rev 54321): Trucha Bug
IOS10 (rev 768): Stub
IOS11 (rev 54321): Trucha Bug
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 54321): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS17 (rev 1032): No Patches
IOS20 (rev 54321): Trucha Bug
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 54321): Trucha Bug
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 3072): Stub
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 54321): Trucha Bug
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 54321): Trucha Bug
IOS61 (rev 5662): No Patches
IOS62 (rev 6430): No Patches
IOS70 (rev 54321): Trucha Bug
IOS80 (rev 54321): Trucha Bug
IOS90 (rev 54321): Trucha Bug
IOS202[60] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS222[38] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS223[38+37] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS224[57] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS236 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS245[37] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS246[38] (rev 21008, Info: d2x-v8final): Trucha Bug, ES Identify, NAND Access
IOS247[53] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS248[55] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS249[56] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS250[57] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS251[58] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
BC v6
MIOS v65535

Report generated on 2014/08/27.

install the wad using PC showmiiwad utility
sd card is not needed, you can use a channel or priiloader

 

[Mulsiphix]

install the wad using PC showmiiwad utility
sd card is not needed, you can use a channel or priiloader

Thank you for this AbdallahTerro! Later, when I was attempting to install some VC games to the real NAND, I continued to get these errors. I switched from Multi-Mod Manager to WiiMod and all WADs installed fine, including the neek2o one I mentioned above. Just wanted to make it clear the problem was related to another program and not ModMii or Sneek itself .

 

[almmiron]

I'm using usbloadergx emunand on a folder, which is in the root of EXT. HDD.
---Is there a difference between the neek emunand to the one made on usbloaderGX?
---People says that different emunands on different usbloaders have different compatibility, andt that wiiflow has the best compatibility. Is this true? if yes, why?
---Is possible to use usbloadergx emunand the way it is on wiiflow? The games not working here will work there, just for booting from other usbloader, or i will make to do Uneek on wiiflow to use the larger compatibility of ww/vc like showed on this topic.

 

[AbdallahTerro]

emunands are the same, the difference between wiiflow and GX is that wiiflow has neek2o support in addition to regular booter, that's why it runs more games successfully.
Note that only few games need this neek2o option to run maybe less than 5%

 

[UranusKiller]

Hi, iv'e got Wiiflow setup perfectly with my nand on USB, I can install .wads through showmiinand and they can be launched via Wiiflow. The whole idea for me doing this was so I can install extra songs/DLC to the emulated nand when playing Just Dance games. Do I need to go into the just dance game launch settings and change something so it saves to emunand and not real nand? Thanks.

 

[AbdallahTerro]

you can change that from wiiflow settings by chosing either savegame or full emulation

 

[UranusKiller]

you can change that from wiiflow settings by chosing either savegame or full emulation

So does "SaveGame" make all saves to the USB nand? what's the difference between the nand options of full, save game, partial etc? thanks

 

[AbdallahTerro]

Check the wiki

 

[UranusKiller]

Ok so games wont run now with nand emulation set to save game or full, games result in black screen or a weird loading bar, 1/5th filled. Emulated channels, games and stuff launch fine through emunand though. What's wrong?

 

[AbdallahTerro]

Syscheck?

 

[UranusKiller]

It's ok, simply using Usb Loader GX like i always have done, dumped nand in features and enabled partial nand in both parts and working perfectly.

 

[Millertime2325]

Hey, thanks for the tutorial, I was able to get everything up and running.

Quick question, haven't really seen much mentioned on this, and I'm just starting out with Wiiflow.

Is there a way to separate the Virtual Console games from the WiiWare games? Basically all I want is to keep the N64VC games as the N64 source, and the WiiWare games as the WiiWare source. Is this possible? If not, can I install a second nand, one with wiiware and one with n64?

Appreciate the continued help and support. Cheers!

 

[AbdallahTerro]

you have few options here:
1. use filter " - " to hid all VC titles in wiiware by pressing B on star and making a new hidden category
2. You can also make a favorite category by pressing Star icon
3. you can use a second nand but you have to select the nand path in wiiflow path settings and in this case hide the wiiware titles.
I'm not 100% sure if this can do the trick for you but maybe you can get it right by trial and error

 

[Millertime2325]

It's not exactly what I had in mind, but if I edit the categories in the .ini file, I can separate them by WiiWare and system. I think this would work out even better so I can install NES, SNES, and other VC games and be able to separate them, and still keep the roms in the other source folders.

Is there a way to add the games to a given source through PC? ie edit the .ini file to assign each game to a source? Or do I have to edit them one by one in the wiiflow interface? Would likely take a while to set that up, but the end result would be worth it.

Finally getting WiiFlow set up how I want it and I have to say I'm absolutely blown away by it. The Wiinnertag ability is a pretty awesome touch, never even knew that was possible. Thanks again for all of your hard work and contributions to the site!

 

[abdezca]

Hi guys, i used Abz master mod to play wiiware/vc games, but when I launch neo geo games, either on regular emunand or neek2o. The games blinks black screens every 2 seconds. The game is playable, but those screens are quite annoying. Any help would be appreciated.