Hardware Unpatched V1 can only boot payloads after Picofly install

[DTronix]

Ok I will buy one... Everyone told me that Pico was better... I usually only do OLEDs and I thought V1 and V2 were easier ! I will try rebuilding the NAND by removing the chip and using the RCM fusée gelée exploit and we'll see where it leads...

 

[Hayato213]

Ok I will buy one... Everyone told me that Pico was better... I usually only do OLEDs and I thought V1 and V2 were easier ! I will try rebuilding the NAND by removing the chip and using the RCM fusée gelée exploit and we'll see where it leads...

You could have used a trinket M0 instead though if you had an unpatched switch, really no need of the RP2040 HWFLY

 

[DTronix]

I know but my friend forgot to tell me the serial before I ordered the chip...

How can I rebuild a nand if my backup is already corrupted ?

 

[Hayato213]

I know but my friend forgot to tell me the serial before I ordered the chip...

How can I rebuild a nand if my backup is already corrupted ?

You should try to swap the RP2040 HWFLY with a HWFLY Core v4 or v5 depending on his emmc brand. You need V5 if it has Toshiba emmc. Rebuild NAND doesn't work well with firmware 17.0.0

 

[DTronix]

Ok I have a Samsung, i'll go with a v4, thanks !

 

[maximus007]

You need to delete one file 0000000021
It's in the system saves partition

 

[DTronix]

You need to delete one file 0000000021
It's in the system saves partition

I just followed Stethix guide on unbricking ()

System wipe failed (I think it's bc I already did that before)


I deleted the saves he said, like you said except there was no file that ended in 21, only d1, maybe that's what you meant ?

Anyway it didn't work. still a black screen...