Hacking The M3 Quad-Boot

  • Thread starter Thread starter The Catboy
  • Start date Start date
  • Views Views 221,866
  • Replies Replies 578
Status
Not open for further replies.
airpirate545 said:
When using the iSakuReal that doesnt require ram i get the error, "Couldn't find file:
/_system_/_sys_data/R4i.sys "
even though I made sure the file was transferred along with everything else.
Well that's strange, it was working fine on my card, I will download this one and see what's wrong with it in the night or morning.
EDIT: Well I went and tested it, the firmware is working just fine for me, Not sure why, it might be just your card.
Try backing up your card and reformatting it.
 
R4i firmware doesn't work on the RAM required quadboot. It says
"couldn't find file: /_system_/_sys_data/r4i.sys"
The file is there.

If your 'solution' is to format the card and try doing it again, then that's not a proper solution. The only thing on the card is the firmware right now, from a format.

[Edit] Seems like on the r4i website they have added a 'fixed' version of 2.7
 
IAmTheRad said:
R4i firmware doesn't work on the RAM required quadboot. It says
"couldn't find file: /_system_/_sys_data/r4i.sys"
The file is there.

If your 'solution' is to format the card and try doing it again, then that's not a proper solution. The only thing on the card is the firmware right now, from a format.
I am not sure what is wrong with yours, well I am going to PM you my working copy in a little to run a little test on this
 
There appeared to have been an error on some people's cards, I uploaded an updated Quad-Boot with the same firmware from my card which I can conform it works since it's the very same firmware from my card, if one does have anymore problems I will work on it ASAP.
Also I updated the Cheat file in the temp Sakura FAQ.
 
the r4i system woun`t work

it says:

Couldn`t finde file: /_system_/_sys_data/R4i.sys


but the data is in the folder
 
The Pink Cat Boy said:
There appeared to have been an error on some people's cards, I uploaded an updated Quad-Boot with the same firmware from my card which I can conform it works since it's the very same firmware from my card, if one does have anymore problems I will work on it ASAP.
Also I updated the Cheat file in the temp Sakura FAQ.
So you added the second upload of the touchpod firmware to it?The one that they updated secretly
 
Rockstar said:
The Pink Cat Boy said:
There appeared to have been an error on some people's cards, I uploaded an updated Quad-Boot with the same firmware from my card which I can conform it works since it's the very same firmware from my card, if one does have anymore problems I will work on it ASAP.
Also I updated the Cheat file in the temp Sakura FAQ.
So you added the second upload of the touchpod firmware to it?The one that they updated secretly
Well it appears the error with the R4i is back again >.< it works on my card, but then when I upload it, people get the same error. Strange.
I did indeed add the secret updates to the Quad-Boots and Sakura update

EDIT: For people getting the R4i Problem, I am sorry. So I am going to upload the straight from my card firmware, which I know works since I am using it right now.
 
The Pink Cat Boy said:
Rockstar said:
The Pink Cat Boy said:
There appeared to have been an error on some people's cards, I uploaded an updated Quad-Boot with the same firmware from my card which I can conform it works since it's the very same firmware from my card, if one does have anymore problems I will work on it ASAP.
Also I updated the Cheat file in the temp Sakura FAQ.
So you added the second upload of the touchpod firmware to it?The one that they updated secretly
Well it appears the error with the R4i is back again >.< it works on my card, but then when I upload it, people get the same error. Strange.
I did indeed add the secret updates to the Quad-Boots and Sakura update
Okay thanks, I will test R4i RTS too
 
Rockstar said:
The Pink Cat Boy said:
Rockstar said:
The Pink Cat Boy said:
There appeared to have been an error on some people's cards, I uploaded an updated Quad-Boot with the same firmware from my card which I can conform it works since it's the very same firmware from my card, if one does have anymore problems I will work on it ASAP.
Also I updated the Cheat file in the temp Sakura FAQ.
So you added the second upload of the touchpod firmware to it?The one that they updated secretly
Well it appears the error with the R4i is back again >.< it works on my card, but then when I upload it, people get the same error. Strange.
I did indeed add the secret updates to the Quad-Boots and Sakura update
Okay thanks, I will test R4i RTS too
Alright, Well I am updating them now, so not a wise idea to test them until they are fully updated. They will be done updating in like a minute, I will post when they are done
EDIT: Made a mistake well updating (still early for me) I updated the wrong one, so just wait a few minutes for me to fix that.
 
hello, does any fw in this huge package run pkmn ss without freezes?

i dont have internet at home right now and use a little shiny device with an crazy internet connection to look stuff up,
so please dont kill me for this question.
im not up to date right now, sry

i think i read something about r4i works wit pkmn (which i think is included in this package or isnt it?) but everytime i want to open the faq you wrote this crazy mobile thing fucks everything up and i cant read shit.
please help
 
leonie222 said:
hello, does any fw in this huge package run pkmn ss without freezes?

i dont have internet at home right now and use a little shiny device with an crazy internet connection to look stuff up,
so please dont kill me for this question.
im not up to date right now, sry

i think i read something about r4i works wit pkmn (which i think is included in this package or isnt it?) but everytime i want to open the faq you wrote this crazy mobile thing fucks everything up and i cant read shit.
please help
The Sakura, Touchpod, and R4i Have been reported to work with little freezing. That's all I know, I haven't tested it out yet since I lost my game SD cards
 
leonie222 said:
hello, does any fw in this huge package run pkmn ss without freezes?

i dont have internet at home right now and use a little shiny device with an crazy internet connection to look stuff up,
so please dont kill me for this question.
im not up to date right now, sry

i think i read something about r4i works wit pkmn (which i think is included in this package or isnt it?) but everytime i want to open the faq you wrote this crazy mobile thing fucks everything up and i cant read shit.
please help
as of now..none of the M3 firmwares runs the pokemon games perfectly, and it's a known problem, hopefully it could be 100% fixed on the next firmware
 
Good news
happy.gif
One the Quad-Boots are reported to work outside my microsd card (thank you Rockstar ^///^) and I found my game testing MicroSD card, so now I can test games out again
happy.gif
 
Does the tri-boot include M3 Sakura v1.47X and TouchPod v4.8X ? Also, is Kaura pretty stable now? It's just a bootscreen, right? I've never actually used it...
 
justinefremlouw said:
Does the tri-boot include M3 Sakura v1.47X and TouchPod v4.8X ? Also, is Kaura pretty stable now? It's just a bootscreen, right? I've never actually used it...
Well the files I provide are the Quad-Boots, so they include M3 Sakura v1.47X and TouchPod v4.8X as well Kaura, but you can just move the R4 firmware over from those to the normal Sakura, which is provided in the second post and use it as the old Tri-Boot, still back on topic to myself. All the files up on the main page are using the most up to date firmwares and were tested by me and work. Kaura is still not the best out there, it works, but it's advices to back up your card first. It's a Boot loader and a firmware, so you can boot into Sakura or Touchpod (or in some cases a different firmware), but it also can boot games as well.
 
Status
Not open for further replies.

Site & Scene News

Popular threads in this forum