The switch lite doesn't make use of the dat0 signal point iirc.Anyone know if this adapter works on a switch lite emmc?
The switch lite doesn't make use of the dat0 signal point iirc.
Already did...the damage pad is the frist poimt of acess from the emmc...so all the trail is useless...i really need to get the signal directly from emmcthere's much easier ways of accessing the interesting emmc signals on the lite, look at some install diagrams
Already did...the damage pad is the frist poimt of acess from the emmc...so all the trail is useless...i really need to get the signal directly from emmc
Beacause i need the clk and cmd points... i was going to do wxactly the way you said...but with this adapter is much more simpleIt'll probably work, I just installed this adapter on the OLED and from what I recall the frame surrounding the emmc on the OLED is roughly / same size as the frame around the lite. You can probably just cut the frame to make it fit.
If all you need is the dat0 why not just run a wire under the emmc instead of using the adapter? The adapter is not easy to install, it is first soldering the adapter onto the mainboard, then you would need to solder the emmc to the top of the adapter. This is my first time really reballing, so if you have the skills, you can probably do it.
edit: why not use the OLED adapter that slides under the emmc to get dat0? You would need to figure out a way to secure it (solder mask may work).
I did not realize you also needed cmd and clk. This adapter will work to expose dat0, cmd and clk connecton.8
Beacause i need the clk and cmd points... i was going to do wxactly the way you said...but with this adapter is much more simple
From what i read hwfly_nx can work with a blank emmc but I'm not sure on spacecraft if you search your find posts from the guy behide hwfly_nx talking about how he made the fw to work with it.My major doubt is the possibility of sx core handle the glitch with a blank eMMC
A question....is possible chamge a broken emmc to a new one and proceed to the restoration whitout a ufi box?Fixed a similar issue today by replacing an sk hynix emmc with the suggested one.
Can you do some emmc benchmarks in hekate and check that results are consistent and get >300MB/s on the first test?
Perfect....thank youyes no problem. modchip writes just enough to get into hekate, and then you just restore full nand backup with hekate
Refer to post #38 on this thread where evil_santa lists out the emmc modules that'll work with the switch. evil_santa has also mentioned that the KLMEG8UCTA-B041 samsung emmc module is the fastest. There is also a cheaper Kingston 256GB emmc module model EMMC256-TY29-5B111 which I have installed in my OLED switch. I have not benchmarked the kingston against the samsung so can't tell you which is faster (samsung probably since it has a larger cache).I would assume 256gb is the biggest chip possible for this mod or are there any bigger options out there?
Who would be a good seller to buy the correct chip from on aliexpress?
Would be very greatful if someone could link me to the correct part!
dear god, if you find any info whatsoever on those, let me know please! <3Refer to post #38 on this thread where evil_santa lists out the emmc modules that'll work with the switch. evil_santa has also mentioned that the KLMEG8UCTA-B041 samsung emmc module is the fastest. There is also a cheaper Kingston 256GB emmc module model EMMC256-TY29-5B111 which I have installed in my OLED switch. I have not benchmarked the kingston against the samsung so can't tell you which is faster (samsung probably since it has a larger cache).
There are some spec sheets out there that show a 4 terabit or 512GB emmc module made by Silicon Motion. I've been trying to locate this chip but to no avail. So it seems like the easiest upgrade option is to 256GB.
Ferri emmc (Silikon Motion)dear god, if you find any info whatsoever on those, let me know please! <3
i badly want those
EDIT: Could you share the spec sheet? any serial numbers or identifying numbers or anything on that chip?
I know some friends in asia i would love to ask if they know anything about this.
thank you so much!Ferri emmc (Silikon Motion)
SM662PBF-BESS 512gb
You can find this chip on digikey bit it's hard to find it otherwise.