Switch-OC-Suite

[Purpeliz]

but please do note that these voltages are what pcv tries to set and may not be actual voltages. pcv can lie.

yeah, this is why I'm asking.

well, if anyone knew, it'd be great if they share it.

 

[ragnarok_approaches123]

How do you know if you are using the "Hekate-ipl bootloader"? I know that when turning on the Switch I launch Hekate then launch Atmosphere from there. Is this the "Hekate-ipl bootloader" or some other version of Hekate which I don't know about?

 

[Ethelbert]

What matters is whether you boot with Fusee or package3. The line is needed with package3, fusee loads kips automatically.

Well, at least that's how I understand it and how it seemed to work when I tested it.

 

[ragnarok_approaches123]

I load Hekate, press launch then press SYSCFW. Not sure whether this uses Fusee or package3.

 

[Ethelbert]

Open your hekate_ipl.ini and see what the launch entry does.

 

[ragnarok_approaches123]

I'm not sure exactly how to read this file but it looks like package3 to me

[config]
updater2p=1
{------ Atmosphere ------}
[Atmosphere FSS0 EmuMMC]
fss0=atmosphere/package3
kip1=atmosphere/kips/*
emummcforce=1
icon=bootloader/res/emu_boot.bmp
{}
[Atmosphere FSS0 SYS]
fss0=atmosphere/package3
kip1=atmosphere/kips/*
emummc_force_disable=1
icon=bootloader/res/sys_cfw_boot.bmp
{}
{-------- Stock ---------}
[Stock SYS]
fss0=atmosphere/package3
stock=1
emummc_force_disable=1
icon=bootloader/res/stock_boot.bmp

 

[meha]

version 1.5.1 is released

• minor dram timing adjustments
• hiopt table (GPU Undervolt 2) is fixed and now works correctly and you get much lower power draw

 

[Ethelbert]

I'm not sure exactly how to read this file but it looks like package3 to me

[Atmosphere FSS0 SYS]
fss0=atmosphere/package3
kip1=atmosphere/kips/*
emummc_force_disable=1
icon=bootloader/res/sys_cfw_boot.bmp

Yeah, at you also have kip1=atmosphere/kips/* which should load every kip in the folder automatically, so you shouldn't need to add a separate line for the loader.

 

[Purpeliz]

After I had updated to the latest version and the newer loader.kip file (where I only undervolted the GPU with HiOPT through the online configurator), the game I was playing (Divinity) froze on loading screen. This hasn't happened ever before with the older .kip and checked HiOPT table.

Post automatically merged: Jun 7, 2023

This is really weird since the gpu clock on loading screens is very low. And as far as I know, you can't really go below 610mV on mariko

 

[ragnarok_approaches123]

Yeah, at you also have kip1=atmosphere/kips/* which should load every kip in the folder automatically, so you shouldn't need to add a separate line for the loader.

I'll give it a shot later. If it's set up incorrectly is there any chance of NAND corruption or hardware damage?

 

[iGom]

How can I get CPU 2295.0 GPU 1075.2 on Erista?

 

[meha]

How can I get CPU 2295.0 GPU 1075.2 on Erista?

Erista limit is CPU 2091, GPU 921

 

[linuxares]

Erista limit is CPU 2091, GPU 921

Hekate did open some new speeds in the latest release.

https://github.com/CTCaer/hekate/releases/tag/v6.0.5

 

[meha]

Hekate did open some new speeds in the latest release.

https://github.com/CTCaer/hekate/releases/tag/v6.0.5

yeah I already checked hekate changelog

 

[thequickbrownfox]

I have a quick question.
I know there is 460Mhz limit for GPU in handheld mode on Erista.
But what about Mariko? Are higher frequencies for GPU available in handheld mode (not charging) on official build of Switch-OC-Suite on Mariko devices?

Thanks!

 

[meha]

I have a quick question.
I know there is 460Mhz limit for GPU in handheld mode on Erista.
But what about Mariko? Are higher frequencies for GPU available in handheld mode (not charging) on official build of Switch-OC-Suite on Mariko devices?

Thanks!

mariko have higher limits. 1963/998 on battery. exact limits are on readme for sys-clk-oc

 

[landepro]

Does anyone know what's the limiting factor in docked gpu overclocking? Is it the total power draw? I'm wondering if i can go past the safe gpu limits if I'm keeping the cpu at stock thus potentially keeping the soc power draw lower than while running both cpu and gpu at max safe frequencies.

 

[zarke661]

undervolting on erista gpu is possible?

 

[meha]

undervolting on erista gpu is possible?

yeah it is possible, but not available for erista on oc-suite.
i don't have console for erista development, so my main focus is mariko

 

[owentrue]

doesn't work for me, have no clue what did I do wrong