Hacking SWITCH NOOB PARADISE - Ask questions here

[willy101]

I did update all 3 and now ctcaer can’t boot into atmosphere. So I was thinking of deleting everything on the sd but didn’t wanna remove emummc

 

[binkinator]

I did update all 3 and now ctcaer can’t boot into atmosphere. So I was thinking of deleting everything on the sd but didn’t wanna remove emummc

edit; before your erase anything. Please post the contents of your /bootloader/hekate_ipl.ini file.

Is your emunand on a hidden partition or file system? If hidden partition, you can simply format the main partition using FAT32 and you’re ready to go. If you’re using file based partition you have to be more delicate.

An easy way to get where you want to be would be to make a /back directory on your sd card and move /atmosphere and /bootloader into the /back folder and start from there.

 

[condor62]

Hi gbatemp, I recently updated my firmware to 14.0. Everything on the stock side is working fine along with emunand updated to 14 with hats. I cannot launch games under syscfw only homebrew. The games launch on stock fw and emunand but keep getting an error in syscfw. Wondering if anyone has had the same issue? Thanks

 

[binkinator]

Hi gbatemp, I recently updated my firmware to 14.0. Everything on the stock side is working fine along with emunand updated to 14 with hats. I cannot launch games under syscfw only homebrew. The games launch on stock fw and emunand but keep getting an error in syscfw. Wondering if anyone has had the same issue? Thanks

Did you update sigpatches? Check my sig.

https://github.com/ITotalJustice/patches

Looks like hats has Sigpatches bundled? Going to check them out.

 

[binkinator]

Just when you thought it was safe!

https://github.com/Atmosphere-NX/Atmosphere/releases/tag/1.3.1

PSA: Do not update FW to 14.1.0 until other folks have fully tested everything!

What a waste of a release;

Ver. 14.1.0 (Released April 4, 2022)​

"Platinum Point Notification Settings" has been added under Notifications in System Settings.

• Unclaimed Platinum Points earned from completing Nintendo Switch Online missions on your Nintendo Switch system will generate notifications.
  • Nintendo Switch Online missions and rewards are not available in some countries and regions. For more information, see How to Complete a My Nintendo Mission.
• Setting these notifications to OFF will hide the notification sent when there are unclaimed Platinum Points.

 

[condor62]

Yeah I updated the sig patches along with atmosphere. Have been booting from hekate (fusee) 5.7.2 payload from the release. I should note that gamecarts launch with no issue. I have tried reinstalling a few eshop titles and still none boot when on sysnand. If I figure out what to change/add i'll post what I find. Thanks again.

 

[binkinator]

Yeah I updated the sig patches along with atmosphere. Have been booting from hekate (fusee) 5.7.2 payload from the release. I should note that gamecarts launch with no issue. I have tried reinstalling a few eshop titles and still none boot when on sysnand. If I figure out what to change/add i'll post what I find. Thanks again.

What is the error? Just blank screen? What does your /bootloader/hekate_ipl.ini look like?

 

[condor62]

The error code that comes up is 2123-0011

Here is the hekate_ipl.ini

[config]
autoboot=0
autoboot_list=0
bootwait=0
verification=1
backlight=100
autohosoff=2
autonogc=0
updater2p=1


{--- Custom Firmware ---}
[CFW (SYSNAND)]
fss0=atmosphere/package3
kip1patch=nosigchk
emummc_force_disable=1
icon=bootloader/res/sysnand.bmp
{}

[CFW (EMUMMC)]
fss0=atmosphere/package3
kip1patch=nosigchk
emummcforce=1
icon=bootloader/res/emummc.bmp
{}

 

[binkinator]

The error code that comes up is 2123-0011

Here is the hekate_ipl.ini

[config]
autoboot=0
autoboot_list=0
bootwait=0
verification=1
backlight=100
autohosoff=2
autonogc=0
updater2p=1


{--- Custom Firmware ---}
[CFW (SYSNAND)]
fss0=atmosphere/package3
kip1patch=nosigchk
emummc_force_disable=1
icon=bootloader/res/sysnand.bmp
{}

[CFW (EMUMMC)]
fss0=atmosphere/package3
kip1patch=nosigchk
emummcforce=1
icon=bootloader/res/emummc.bmp
{}

Hekate looks great.

That error is kinda funky.


Some folks were saying it was a ban. Others said they reinstalled Atmosphere from the GitHub release and they were fine. should be easy enough to move /atmosphere to /atmosphere.bak and unzip the 1.3.0 version of Atmosphere and the same version of iTotalJustice Sigpatches. If you go this route, be sure you match the version numbers as there was a new release today.

 

[condor62]

Ah well I reinstalled atmosphere from the release and games still error out in syscfw. Atleast emunand is working fine just a bummer if it's banned I only connected to the eshop and have never taken the system online other than that. Thanks again

 

[binkinator]

Ah well I reinstalled atmosphere from the release and games still error out in syscfw. Atleast emunand is working fine just a bummer if it's banned I only connected to the eshop and have never taken the system online other than that. Thanks again

Totally not saying you’re banned! Was just what some folks had said about that code. The fact that you don’t get that code in OFW would lead me to believe you’re actually just fine. Didn’t mean to scare you..

 

[willy101]

gonna repost

 

[willy101]

edit; before your erase anything. Please post the contents of your /bootloader/hekate_ipl.ini file.

Is your emunand on a hidden partition or file system? If hidden partition, you can simply format the main partition using FAT32 and you’re ready to go. If you’re using file based partition you have to be more delicate.

An easy way to get where you want to be would be to make a /back directory on your sd card and move /atmosphere and /bootloader into the /back folder and start from there.

How do you know if it's on file system vs on hidden?

[config]
autoboot=0
autoboot_list=0
bootwait=0
autohosoff=0
autonogc=1
updater2p=1
backlight=100

[CFW - sysMMC]
fss0=atmosphere/package3
kip1patch=nosigchk
atmosphere=1
emummc_force_disable=1
icon=bootloader/res/icon_payload.bmp

[CFW - emuMMC]
fss0=atmosphere/package3
kip1patch=nosigchk
emummcforce=1
atmosphere=1
icon=bootloader/res/icon_payload.bmp

[Stock - sysMMC]
fss0=atmosphere/package3
emummc_force_disable=1
stock=1
icon=bootloader/res/icon_switch.bmp

 

[binkinator]

Ah well I reinstalled atmosphere from the release and games still error out in syscfw. Atleast emunand is working fine just a bummer if it's banned I only connected to the eshop and have never taken the system online other than that. Thanks again

I think this is because your Switch is trying to verify your Game Cloud Saves on your Sysnand and cannot because you’ve likely blocked Ninty access via CFW.

This would explain why it works in OFW on Sysnand (no CFW actively blocking Ninty network access) and your CFW on Emunand probably doesn’t have a linked account or Game Cloud Saves so it’s not checking,

Going to see if the latest HATS enables dns:mitm or blanks out your Prodinfo (you should be able to see this as 0000s in your System Serial number)

update:

HATS comes with a /exosphere.ini file that contains a valid config that blanks out Prodinfo for both sysmmc and emummc (both = 1) so this would definitely cause you “network” issues connecting to Ninty to verify a cloud save before starting a game.

[exosphere]
debugmode=1
debugmode_user=0
disable_user_exception_handlers=0
enable_user_pmu_access=0
blank_prodinfo_sysmmc=1
blank_prodinfo_emummc=1
allow_writing_to_cal_sysmmc=0
log_port=0
log_baud_rate=115200
log_inverted=0

 

[binkinator]

How do you know if it's on file system vs on hidden?

Look for an /Emummc/ directory.

Inside there will be an emummc.ini file that contains something like one of the following:

Spoiler: FILES

[emummc]
enabled = 1
path = EmuMMC
nintendo_path = Nintendo-emu

Spoiler: PARTITION

[emummc]
enabled = 1
sector = 0x00000000

[config]
autoboot=0
autoboot_list=0
bootwait=0
autohosoff=0
autonogc=1
updater2p=1
backlight=100

[CFW - sysMMC]
fss0=atmosphere/package3
kip1patch=nosigchk
atmosphere=1
emummc_force_disable=1
icon=bootloader/res/icon_payload.bmp

[CFW - emuMMC]
fss0=atmosphere/package3
kip1patch=nosigchk
emummcforce=1
atmosphere=1
icon=bootloader/res/icon_payload.bmp

[Stock - sysMMC]
fss0=atmosphere/package3
emummc_force_disable=1
stock=1
icon=bootloader/res/icon_switch.bmp

This looks great. Straightforward and simple.

 

[willy101]

Look for an /Emummc/ directory.

Inside there will be an emummc.ini file that contains something like one of the following:

Spoiler: FILES

[emummc]
enabled = 1
path = EmuMMC
nintendo_path = Nintendo-emu

Spoiler: PARTITION

[emummc]
enabled = 1
sector = 0x00000000

This looks great. Straightforward and simple.

You're a genius. Yep I do have that. So it's bad that my emummc is file based?

So I just updated all my tesla overlays, and now I think I've narrowed down the issue. It was mission control causing a panic error. Gonna try removing that and rebooting EDIT IT WORKED THANK YOU!!

 

[binkinator]

You're a genius. Yep I do have that. So it's bad that my emummc is file based?

Partition based is preferred but not required.
File based is susceptible to file system corruption. if you lose a file…probably not too bad, unless it’s in your emunand. Might happen…might not. If I were you I’d enjoy my device for a bit and come back to it at a later date.

So I just updated all my tesla overlays, and now I think I've narrowed down the issue. It was mission control causing a panic error. Gonna try removing that and rebooting EDIT IT WORKED THANK YOU!!

Yep. Mission Control and Fizeau modules have been causing problems with this most recent update.

Glad you figured it out!

 

[PredaKing10]

Hi there!

I need some advice:

I have a switch with sx pro on firmware 11 but all the new stuff don’t work!​

I have another SD card and would like to install atmosphere. Can I follow “How to set up emuNAND with Atmosphere on Erista (Unpatched) from rentry” and then install emunand through hekate and update through daybreak to 14.1 leaving ofw on 11?​

Is it possible to switch SD cards and have 2 different setups?​

Tnx for all the help!

 

[binkinator]

Hi there!

I need some advice:

I have a switch with sx pro on firmware 11 but all the new stuff don’t work!​

I have another SD card and would like to install atmosphere. Can I follow “How to set up emuNAND with Atmosphere on Erista (Unpatched) from rentry” and then install emunand through hekate and update through daybreak to 14.1 leaving ofw on 11?​

Is it possible to switch SD cards and have 2 different setups?​

Tnx for all the help!

Yes to all questions. You are spot on.

That said, one of the weakest parts of the Switch is the SD Card reader and swapping cards will add wear and tear until it breaks.

If you’re up for it, here’s a guide for putting both Atmosphere and SXOS on the same card.

https://gbatemp.net/threads/how-to-...en-partitions-on-the-same-sd-tutorial.601607/

 

[condor62]

I think this is because your Switch is trying to verify your Game Cloud Saves on your Sysnand and cannot because you’ve likely blocked Ninty access via CFW.

This would explain why it works in OFW on Sysnand (no CFW actively blocking Ninty network access) and your CFW on Emunand probably doesn’t have a linked account or Game Cloud Saves so it’s not checking,

Going to see if the latest HATS enables dns:mitm or blanks out your Prodinfo (you should be able to see this as 0000s in your System Serial number)

update:

HATS comes with a /exosphere.ini file that contains a valid config that blanks out Prodinfo for both sysmmc and emummc (both = 1) so this would definitely cause you “network” issues connecting to Ninty to verify a cloud save before starting a game.

[exosphere]
debugmode=1
debugmode_user=0
disable_user_exception_handlers=0
enable_user_pmu_access=0
blank_prodinfo_sysmmc=1
blank_prodinfo_emummc=1
allow_writing_to_cal_sysmmc=0
log_port=0
log_baud_rate=115200
log_inverted=0

So I looked into it and both sycmmc and emummc had the serials blank. I opened up the exosphere.ini file from hats and changed the value for "blank_prodinfo_sysmmc=1" to 0 and now the games are launching like normal and serial number has been restored. Thanks again for the help good to know the console isn't banned.