Shouldn’t an update firmware required throw an “unable to start software...” or “update message” ?
should do but eh, also why I asked about sd format first
Shouldn’t an update firmware required throw an “unable to start software...” or “update message” ?
you're right, could be a corruption, but his others games work... That's also why I asked about the installershould do but eh, also why I asked about sd format first
fat32, and installed with gold leaf, awoo, tinfoil (nps, xci, nsz - nothing)What format is your sd card?
Other than that a possible bad dump or you need to update
Then go the path of checking your sd card for corruption, and check the requirements of the game if you need update (firmware and sigpatches) , by the way, do you have overlays/sysmodules or cheat engine running like sysclk or Reverse-Nx or Edizon?fat32, and installed with gold leaf, awoo, tinfoil (nps, xci, nsz - nothing)
maybe, after all, I need a update, but other gamers COULD installed with any problems, I don't know why,
thanks for response to everyone.
i checked and I don't any app that you said,Then go the path of checking your sd card for corruption, and check the requirements of the game if you need update (firmware and sigpatches) , by the way, do you have overlays/sysmodules or cheat engine running like sysclk or Reverse-Nx or Edizon?
Did you hacked yourself your switch or bought it hacked ?i checked and I don't any app that you said,
in hbmenu I can see only NX-ntpc, NX-Shell, NXmtp, NXThemes, NOT reverse-nx and others...
bought it hackedDid you hacked yourself your switch or bought it hacked ?
I'm sorry THERE IS a section of overlays, sysmodules, edizon... i didn't see, sorry...That’s what I thought, on your answer at my previous post. Can you post a screenshot of the root of your sd card ? With the content of subfolders also (Atmosphere, contents, switch). .
Hi, I don't know if I should ask this here...
I'm kinda new to Switch jailbreaking. I bought an unpatched Erista FW10.1.0, I install atmosphere 0.14.
Recently I bought a 1 TB micro SD card, and I want to upgrade to FW 11.1 and atmosphere 0.18.
- Is everything working on atmosphere 0.18?, I read something about USB not fully working to install games on 0.17.
- I delete the serial number, I guess the upgrade process is restoring the serial number, removing the card, restart the Switch, connect to internet, upgrade the FW, and then jailbreak again in the new card. Am I right?
Isn’t “preferable “ to use daybreak with the latest releases of Atmosphere ?
- Everything important is working. The issue with USB installation was an early one when the firmware was first released but that has since been ironed out
- First of all, do not call it a "jailbreak"; jailbreak is an iOS term that has only ever been also used on the PS3 and the Switch is neither an iOS nor Sony device. Secondly, don't delete your serial number because if you do not have a backup, then you will have permanently banned yourself. Instead use 90DNS instead if you want a safe way to go online without risking a ban otherwise just don't use any Wi-Fi settings. Thirdly, I recommend using ChoiDujourNX to update your firmware instead.
- Everything important is working. The issue with USB installation was an early one when the firmware was first released but that has since been ironed out
- First of all, do not call it a "jailbreak"; jailbreak is an iOS term that has only ever been also used on the PS3 and the Switch is neither an iOS nor Sony device. Secondly, don't delete your serial number because if you do not have a backup, then you will have permanently banned yourself. Instead use 90DNS instead if you want a safe way to go online without risking a ban otherwise just don't use any Wi-Fi settings. Thirdly, I recommend using ChoiDujourNX to update your firmware instead.
- Everything important is working. The issue with USB installation was an early one when the firmware was first released but that has since been ironed out
- First of all, do not call it a "jailbreak"; jailbreak is an iOS term that has only ever been also used on the PS3 and the Switch is neither an iOS nor Sony device. Secondly, don't delete your serial number because if you do not have a backup, then you will have permanently banned yourself. Instead use 90DNS instead if you want a safe way to go online without risking a ban otherwise just don't use any Wi-Fi settings. Thirdly, I recommend using ChoiDujourNX to update your firmware instead.
The scene has been using ChoiDujourNX ever since its release so everyone knows it works perfectly fine. Daybreak is merely the newer toy that is also being updated. To me, either or is fine.Oh, super, thank you. I will update the FW as you say. The only thing that stop me from doin it was the USB install and the MTP server. Don't worry about my SN, is safe in a couple of places.
Still, I'm not a 100% sure abut the process, do I install atmosphere 0.17 and then update the FW with daybreak as suggested by @Maupiti and @Adran_Marit?
I say jailbreak because the other term is... less legal, if you know what I mean...
Works fine unless you have a MarikoThe scene has been using ChoiDujourNX ever since its release so everyone knows it works perfectly fine. Daybreak is merely the newer toy that is also being updated. To me, either or is fine.
Also hacking is a less legal term? Hacking is a completely profitable career path. There are such things as "white hat hackers" who discover vulnerabilities but do not abuse them so they can be fixed for cash.
If it is a Windows PC, Windows only offers native support for NTFS and FAT file systemsHello
Im trying to make an emuMMC as partition from a guide i found.
The process it self worked and i ended up with an partition emuMMC, but everytime i plug
the sd card into my pc there is this message, you need to format the drive before you can use it.
I can see that there is about 16mb unallocated space on the sd.
What is that used for?, and can i delete the 16mb and that way get rid of the need format message.
Yes im on win10 and the sd is formatted as fat32.If it is a Windows PC, Windows only offers native support for NTFS and FAT file systems
How did you create your EmummC ? via Hekate or Sxos ?Hello
Im trying to make an emuMMC as partition from a guide i found.
The process it self worked and i ended up with an partition emuMMC, but everytime i plug
the sd card into my pc there is this message, you need to format the drive before you can use it.
I can see that there is about 16mb unallocated space on the sd.
What is that used for?, and can i delete the 16mb and that way get rid of the need format message.