Hacking SWITCH NOOB PARADISE - Ask questions here

frenk99999

Active Member
Newcomer
Joined
Nov 6, 2014
Messages
36
Trophies
0
Age
30
XP
94
Country
Slovenia
Hello guys. I am new to this CFW on switch stuff. I've been trying to get hetake to recognise my sd card but it keeps throwing NOFAT Error 13. I can verify that the sd card is working and switch can read it. I've also tried to format the card with TegraExplorer but when i check the partitions nothing was changed. Can someone help me on what am I doing wrong?

My SD card is SDXC 64GB

EDIT: The TegraEplorer even says "Partitioning SD.. Done!" Yet again, nothing is there
 
Last edited by frenk99999,
D

Deleted User

Guest
Hi guys!
I have a Switch without emuMMC updated to 9.2.0. I don't plan to play online. Considering this, should I create an emuMMC or is it not worth the effort?

I don't know what are the benefits in using emuMMC.

Hello guys. I am new to this CFW on switch stuff. I've been trying to get hetake to recognise my sd card but it keeps throwing NOFAT Error 13. I can verify that the sd card is working and switch can read it. I've also tried to format the card with TegraExplorer but when i check the partitions nothing was changed. Can someone help me on what am I doing wrong?

My SD card is SDXC 64GB

EDIT: The TegraEplorer even says "Partitioning SD.. Done!" Yet again, nothing is there
Is your SD card format FAT32?
 
Last edited by ,

nick99627

New Member
Newbie
Joined
Oct 17, 2019
Messages
2
Trophies
0
Age
26
XP
35
Country
Italy
Hello, I have a retro switch with sx os, how do I know if I’m banned?
Just boot into sysnand (cfw is on emunand) and try e shop?
 

Miguedj1997

New Member
Newbie
Joined
Mar 8, 2020
Messages
4
Trophies
0
Age
27
XP
52
Country
Spain
Hi guys,

I have a problem, I tried to update atmosphere and hetake, after installing atmosphere 10.3 and hetake 5.1.2, I launched the CFW but the screen showed:
''Failed to apply 'nosigchk' ''
''Failed to lauch HOS!''


I would like to know what to do in order to launch the CFW.

Thanks!
 

Alteration

Member
Newcomer
Joined
Dec 5, 2014
Messages
5
Trophies
0
Age
30
XP
89
Country
Australia
So for safety I want to check if I have the process to setup EmuMMC on a cfw switch correctly.

My switch has been using Atmosphere without EmuMMC before, so;
  1. Factory Reset (while offline)
  2. Partition MicroSD in half for eMMC / EmuMMC
  3. Boot into Hekate
  4. Restore eMMC using my clean backup
  5. Update eMMC to latest
  6. Delete Wifi Profiles
  7. Boot back into hekate
  8. Create EmuMMC from eMMC
  9. Factory Reset EmuMMC (offline)
 
Last edited by Alteration,

AntonyB

Active Member
Newcomer
Joined
Jan 15, 2016
Messages
31
Trophies
0
Age
36
XP
194
Country
France
It's been awhile since I updated my switch so was looking for some advice. Currently I use just atmosphere but was wondering about creating EmuMMC since I don't have one. I have a 120GB SD is it big enough?

I have right now 8.1.0, so what would be the best way to go about things?

Can I backup my installed games and saves if I create EmuMMC ?
I read about a Freeshop, do I need to use Incognito for this ?
If I remember rightly my keys are quite old (before SEPT for sure), should I use lockpick to get them or do they always stay the same?
 

toby1978

Well-Known Member
Member
Joined
Jan 31, 2016
Messages
133
Trophies
0
Age
45
XP
160
Country
United States
Hey all! I'm looking to mod the Switch and would like to know the best way to go about it. Ive seen many different ways and would like the best way to do so. I've modded all the other Nintendo consoles and 3ds, so I'm not a huge stranger to it. Thanks for the help.
 

Draxzelex

Well-Known Member
Member
Joined
Aug 6, 2017
Messages
19,025
Trophies
2
Age
29
Location
New York City
XP
13,433
Country
United States
Yes, I also tried different micro sd cards and no luck

EDIT: I might as well metion that presing on the spot where sd reader is located stright up stops it from being detected, if that has any relevance to the issue.
It sounds like your SD card reader slot is broken so it needs to be replaced/

If I'm just upgrading my micro SD card to a bigger one is it just a case of copying everything from the smaller one over to the formatted bigger one? No other steps involved?
It is that easy.

Hello, I have a retro switch with sx os, how do I know if I’m banned?
Just boot into sysnand (cfw is on emunand) and try e shop?
Yes just try launching the eShop to check if you are banned.

So for safety I want to check if I have the process to setup EmuMMC on a cfw switch correctly.

My switch has been using Atmosphere without EmuMMC before, so;
  1. Factory Reset (while offline)
  2. Partition MicroSD in half for eMMC / EmuMMC
  3. Boot into Hekate
  4. Restore eMMC using my clean backup
  5. Update eMMC to latest
  6. Delete Wifi Profiles
  7. Boot back into hekate
  8. Create EmuMMC from eMMC
  9. Factory Reset EmuMMC (offline)
Why restore the eMMC before setting up emuMMC? In my opinion, you should restore the eMMC after setting up emuMMC.
It's been awhile since I updated my switch so was looking for some advice. Currently I use just atmosphere but was wondering about creating EmuMMC since I don't have one. I have a 120GB SD is it big enough?

I have right now 8.1.0, so what would be the best way to go about things?

Can I backup my installed games and saves if I create EmuMMC ?
I read about a Freeshop, do I need to use Incognito for this ?
If I remember rightly my keys are quite old (before SEPT for sure), should I use lockpick to get them or do they always stay the same?
emuMMC requires a minimum of 32 GB of free space on your SD card. Personally, I recommend using SX OS to partition the SD card for you then use the migrate emuMMC option in Hekate.

emuMMC initially is just a copy of sysMMC so whatever games are installed and saves are stored will be carried over. Freeshop has been dead on the Switch. While your keys might be outdated, unless you actively use them, there is no need to redump them.

Hey all! I'm looking to mod the Switch and would like to know the best way to go about it. Ive seen many different ways and would like the best way to do so. I've modded all the other Nintendo consoles and 3ds, so I'm not a huge stranger to it. Thanks for the help.
This guide will cover everything from checking which exploits your console is vulnerable to to setting up CFW.
 
  • Like
Reactions: toby1978

wifispy

New Member
Newbie
Joined
Mar 10, 2020
Messages
4
Trophies
0
Age
33
XP
34
Country
Bangladesh
Anyone been banned for doing something like this?
Lets say you were on 9.0.1 using your stock sysNAND, no custom firmware.
Then you upgrade to 9.2.0 using nintendos servers on the stock sysNAND.
Then you restore to a 9.0.1 clean nand backup using hekate.
Then you upgrade from the 9.0.1 clean backup, back to 9.2.0 using nintendo servers.
Anyone been banned from doing something like this?
 

spartin03

Member
Newcomer
Joined
Mar 10, 2020
Messages
13
Trophies
0
Age
39
XP
57
Country
United States
Need help!!! SXOS and reinx doesnt load past the cfw logo, but atmosphere and OFW works fine. Ive tried a few different sd card and fresh files, and tried exfat and fat32. Also tried the sd cards in a different switch and they work fine. On fw 9.2 and sxos 2.9.4 beta
 
Last edited by spartin03,

frenk99999

Active Member
Newcomer
Joined
Nov 6, 2014
Messages
36
Trophies
0
Age
30
XP
94
Country
Slovenia
It sounds like your SD card reader slot is broken so it needs to be replaced/

Yeah, I figured there was something wrong with my SD card reader. Lucky for me it was only badly connected to the mother board (AKA badly assembled). I FUCKING HATE THE SPONGE that was glued to the connector of SD card reader tho. I thought I broke the reader because of that
 

AntonyB

Active Member
Newcomer
Joined
Jan 15, 2016
Messages
31
Trophies
0
Age
36
XP
194
Country
France
emuMMC initially is just a copy of sysMMC so whatever games are installed and saves are stored will be carried over. Freeshop has been dead on the Switch. While your keys might be outdated, unless you actively use them, there is no need to redump them.

But will i need to format my SD that is currently quite full of games before creating emunand ? In FreeShop I'm talking about HBG.
 

DarkSmile

New Member
Newbie
Joined
Mar 10, 2020
Messages
4
Trophies
0
Age
26
XP
47
Country
Belgium
Hello,

Seeing there are 900+ pages, I'm sure people already asked this question.

Question: If been thinking about jailbreaking my nitendo switch, the main reason is so that I could download the official Nintendo games for free and play them. Now before going through all the steps to jailbreak it I would like to know if we even can get the games for free?

If I jailbreaking my switch will I be able to download Nintendo games for free online?
 

Draxzelex

Well-Known Member
Member
Joined
Aug 6, 2017
Messages
19,025
Trophies
2
Age
29
Location
New York City
XP
13,433
Country
United States
Hello,

Seeing there are 900+ pages, I'm sure people already asked this question.

Question: If been thinking about jailbreaking my nitendo switch, the main reason is so that I could download the official Nintendo games for free and play them. Now before going through all the steps to jailbreak it I would like to know if we even can get the games for free?

If I jailbreaking my switch will I be able to download Nintendo games for free online?
You have to download them illegally online but afterwards, you can install them. Of course, you have to make sure your console is unpatched or if it is a patched unit, that it is running firmware 4.1 or less. By the way, jailbreak is an iOS term so it does not really apply to Nintendo Switch hacking.
 

fst312

Well-Known Member
Member
Joined
Nov 4, 2008
Messages
1,179
Trophies
1
Age
36
Location
New York
XP
3,019
Country
United States
Not to sure how this is done but I believe I read there is a way to transfer pc save games to the switch version of the game. Either I read that or it was just about pc mods on switch. So far searching not finding if it’s possible.
 

Topgrandslam

Member
Newcomer
Joined
Mar 11, 2020
Messages
6
Trophies
0
Age
25
XP
47
Country
Korea, South
Hello experts!
I want to patch(=install cfw) my nx now and I have a question about that.

What I want by patching my nx is...
-save editing to my pokemon cartridge and play online
-install hacked games on emmuMMC and play them (without online play)

I will install incognito in my emmuMMC, so installing hacked games and playing them on emmuMMC without online will be safe (almost less probability to get banned). But by installing incognito, I can't play my cartridge with online on my emmuMMC.

Surely, I can play cartridge game online on sysnand, but in that case I can't do save editing to my cartridge because I know installing cfw on sysnand +editing save files +playing online is too risky to get banned.

I come up with solutions and this is what I thought
1. prepare 2 sd cards
2. one is patched one installed cfw/emmu and has clean sysnand and the other one is patched one installed cfw/sys.
3. when I want to play hacked game, use cfw/emmu sd card
4. when I want to play save-modified cartridge with online playing, use cfw/sys sd card to edit my save file (with applying 90dns and airplane mode) -> use cfw/emmu sd card and play online on clean sysnand (=ofw)

Is my solution possible to prevent to get banned (or less probability to get baned)?
If my solution is risky, what should I do in this situation? (what is the better solution?)

Sorry for my bad English :(
 
Last edited by Topgrandslam,

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    K3Nv2 @ K3Nv2: Stop trying to make on my cakes