Homebrew R4 Stage2 TWL Flashcart Launcher(and perhaps other cards soon™)....

[Arso]

it's the simple evolution firmware

 

[ShiroKyouma]

So, if I understand correctly, just install the .cia in emunand and sysnand (n3ds with rei)?

 

[Arso]

So, if I understand correctly, just install the .cia in emunand and sysnand (n3ds with rei)?

yes

 

[dkabot]

My card's always been a DSTWO, so I have no need for this, but it's really cool that you're doing this.
Nice job!

 

[Sgt. Lulz]

Here's a comparison between the YSMenu for M3 Real/i Zero and WoodR4 DSi Launcher SRLs.
M3 on the left, R4 on the right.

Would this work?

 

[Apache Thunder]

Ok that NDS dump is nearly identical to the first firmware file sent to me. It does have a banner while the other one didn't, so it was useful for getting that.

(this was in response to the rom dump of CycloDS by the way)

 

[drewby]

I'm waiting for Action Replay DSi support.

 

[Teton]

someone linked the nds for edge below !

 

[Apache Thunder]

Here's a comparison between the YSMenu for M3 Real/i Zero and WoodR4 DSi Launcher SRLs.
M3 on the left, R4 on the right.

Would this work?

You need to convert the SRL to one that has arm9 binary at 4000 offset. This pretty much requires repacking the rom. The reason being that that there needs to be room made for the DSi Extended header which happens to go in an area where homebrew SRLs like to place their Arm9 binaries. '


Also, that one for m3 may not work. I noticed that the Arm7 code entry offset and arm7 ram entry offset are set to something TWL_FIRM will refuse to boot. It's the evil number pretty much. TWL_FIRM will error out if I try to boot an SRL using it. Most homebrew work fine with alternate arm7 entry settings. But it tends to break some like DS Firmware SRL and the flashcart rom dumps I have tried.

 

[Hiccup]

Here, I dumped my CycloDS as .nds with NDS Backup Tool 3in1. Hope it helps.
http://www93.zippyshare.com/v/q15n9Tl4/file.html

NDS Backup Tool 3in1 is old. Use wooddumper.

 

[Arso]

http://www.filedropper.com/showdownload.php/edgefirmwarearso edge firmware , i will try help you as mutch as i can ^^

 

[lakituvid]

Does the R4 one works with the TTDS?

 

[DeslotlCL]

hey @Apache Thunder i want to uninstall the old versions of the r4 launcher before installing this one, is it secure to delete them with fbi?

 

[Apache Thunder]

They should show up in DevMenu. But yes it's safe to remove them with FBI. I made sure the internal names in the rom are clear on what they are when they show up in Devmenu/FBI.

 

[DeslotlCL]

They should show up in DevMenu. But yes it's safe to remove them with FBI. I made sure the internal names in the rom are clear on what they are when they show up in Devmenu/FBI.

thank you, im installing the new one right now

 

[Gocario]

Well try to boot the card with the above DSiWare app.

The "TWL Slot-1 Launcher" cia, or the "wood r4" cia?

Just make sure you have the firmware files for it installed on the MicroSD card of the Supercard as well.

I have copied "SupercardDS.nds" to the microSD of the supercard.

I keep getting the "An error has occured" screen with the both cia.
I even updated rxTools to the 3.0-Beta-2 (o3ds)

 

[Apache Thunder]

The Supercard CIA I made. That's the one I meant. If you get an error has occured message, there's something wrong with your setup. Did you install it to emunand? If so, make sure it's installed to sysnand as well. This isn't like Slot-1 Launcher. It needs to be present on both if launching from emunand.

EDIT: CycloDS Launcher is read:

CycloDSLauncher_Test.rar

It probably won't work though. I had to change the arm7 code/ram entry address settings to get it to boot. It white screens for me. Might boot if a CycloDS is present, but it may not work with the modified Arm7 settings. Worth a shot though. Doesn't look like I can do much to save CycloDS unless there's alternate firmware compatible with it.

 

[Sgt. Lulz]

You need to convert the SRL to one that has arm9 binary at 4000 offset. This pretty much requires repacking the rom. The reason being that that there needs to be room made for the DSi Extended header which happens to go in an area where homebrew SRLs like to place their Arm9 binaries. '


Also, that one for m3 may not work. I noticed that the Arm7 code entry offset and arm7 ram entry offset are set to something TWL_FIRM will refuse to boot. It's the evil number pretty much. TWL_FIRM will error out if I try to boot an SRL using it. Most homebrew work fine with alternate arm7 entry settings. But it tends to break some like DS Firmware SRL and the flashcart rom dumps I have tried.

Would booting into those SRLs from a different firmware (Like WoodYS does) work, or is it a general problem with those offsets?

 

[Teton]

why do you need to install on both sys and emu nand. ?

 

[Shadowtrance]

This is pretty cool.
Sadly though i can't seem to get any of these dsi things you've been releasing to work for some reason.
Doesn't matter which i launch, this new one, slot1launcher etc i always get the black screen power off error screen of death.
Yes i have the patched twl firm installed on emunand. No idea why it's insta-crashing.