You can't use gamesd and this plugin at the same time.Im on 3.60 and installed the plugin but in vitashell wont showup the SD2VITA to mount.
I have the gamesd.skprx @ux0 installed.
And when i add the line over it after reboot the SD2VITA is not available.
Yes. Vita Storagemgr basically merges the SD2Vita, USBMC, and PSVSD plugins all into one to make managing mount points and multiple devices easier.Does the Storagemgr replace Gamesd?!
The config should be setup as:I'm going out of my tree trying to get this to work!
I've formatted my SD2Vita card using the zzBlank.img, I've copied the storage_config and storagemgr.skprx files to ur0 and added it to the config under Kernel, but no matter how i set up the mount list in storage_config I just can't get my SD to show up as uma0!!
I don't think it's a problem with the SD2Vita adapter, because I can read the SD card via USB mode in Vitashell. I just want to use my Vita MC as ux0 as normal, with the SD card as uma0 for extra space. How would I set that up in the config?
Any help at all would be greatly appreciated!
EDIT- Forgot to mention, I'm running 3.65 Enso on a Phat Vita.
MCD=ux0
GCD=uma0
No, the only purpose of zzblank (which can be easily replaced by any zero-byte-source such as /dev/zero on Unixes) is to remove the partition table and "ensure" the card gets formatted as superfloppy (ie the whole device is treated directly as a partition, instead of having a partition table specifying 1 partition)Yep, that's what I did. Does it matter if the format is NTFS or exFAT before writing the blank.img to it?
I'll try Fat32 next, then. It doesn't come up as an option in Windows' formatter because it's a 64gb card- Would guiformat do the job?
I'll post my config just as soon as my transfers finish.
EDIT-
Here they are! I included the storagemgr log for good measure, not that I can make sense of it!
MCD=ux0
INT=imc0
UMA=ux0
GCD=uma0
It shouldn't matter, since UMA is a USB drive and is only used on a PSTV. As noted in the logs, it checks for a USB drive and if it doesn't find one it cancels the mount there. He could always delete both the INT and UMA option anyways, but it won't fix his issue...probablyFrom the storage_config.txt, I find that you have duplicated the ux0 mounting point. Maybe this is causing the issue.
Code:MCD=ux0 INT=imc0 UMA=ux0 GCD=uma0
GCD=ux0
UMA=ux0
MCD=uma0
INT=imc0
GCD=ux0