I've got a PS5 HDMI repair in front of me. After installing 2 ports (largely on the assumption the first one was defective or whatever), I tested the pads themselves after removing the second HDMI port. Pads 15&16 are shorted together. I know that's not normal. Where do those go to, so I can further diagnose? They run to nearby vias and disappear. The system itself seems to fully boot, as the light turns white, but obviously not displaying anything. Any help would be greatly appreciated.
PS5 HDMI Issue (NOT the port itself)
- Thread starter agehuntsville
- Start date
- Views 3,855
- Replies 8
these go string to hdmi encoder, so it's faulty.
take panasonic chip out and short should be gone, if that's gonna happen then u must replace. Ps5 won't turn on normally without working hdmi encoder
take panasonic chip out and short should be gone, if that's gonna happen then u must replace. Ps5 won't turn on normally without working hdmi encoder
Weirdly, yes. It fully boots to white light and chills. Having one hell of a time getting that chip off the board, though. Even hitting it with 450C and a gallon of Amtec flux doesn't budge it.
The short on pins 15 and 16 in my case are caused by these 2 diodes that have shorted, thanks @jkyoho for the original picture.
I've removed them and the shorts have gone, but still no display, could it be that the Panasonic hdmi IC has gone bad due to the shorted pins?
Anyone know what the values are for these diodes? I would have thought they are protection diodes and the console would output an image without them.
I've removed them and the shorts have gone, but still no display, could it be that the Panasonic hdmi IC has gone bad due to the shorted pins?
Anyone know what the values are for these diodes? I would have thought they are protection diodes and the console would output an image without them.
Attachments
- Joined
- Sep 2, 2020
- Messages
- 1,295
- Trophies
- 0
- Age
- 39
- Location
- TORONTO
- Website
- form.jotform.com
- XP
- 2,230
- Country
I checked my EDM-010 donor board they are same marking code on those pin15,pin16 diode with pin18 diode like picture shown below. So they would be part# CDZT2RA5.6B
Similar threads
-
Psionic Roshambo
-
BigOnYa
-
Xdqwerty
what are you looking at?
-
-
-
@
Psionic Roshambo:
My girlfriend at the time, she had me stay up with her all night because some how the crazy bitch had spent like 12 hours snorting 2 8 balls, didn't use any water (gotta clean your nose) so she had so much crusted in her nose I was sure she was gonna blow up her heart. I mean this was the stuff right off the boat so absolutely pure. ugghh so annoying
-
-
-
-
-
-
-
-
@
Psionic Roshambo:
Also it was literally out of a kilo when I got it off the boat so absolutely pure
-
-
@
Psionic Roshambo:
I was getting 3.5 Grams for 320 could have stepped on it and doubled my money easy lol+1
-
@
BigOnYa:
I'd be afraid to it nowdays, my heart would explode prob. I just stick beers n buds nowdays.
-
@
Psionic Roshambo:
I would get to drive from tarpon springs to like Miami a thousand bucks lol do that twice a week and back in 92 that was good money
-
-
-
-
-
@
BigOnYa:
I'd do shrooms again if could find, and I was outside camping/fishing, and had a cooler full of beer.+1
-
-
@
BigOnYa:
You ever try soaper powder/qauludes? I did once and like a dumbass drank beer on top of taking, I woke up laying in my backyard in the pouring rain, it knocked me out. I have not seen it around in many many years.+1
-
-
@
Psionic Roshambo:
I did pass out one time on a floor after taking a bunch of Ambien lol thought it would help me sleep and did it lol
-
@
Psionic Roshambo:
Girlfriend was working at a pharmacy and stole like 500 of them, was and still is the biggest pill bottle I have ever seen lol
@
Psionic Roshambo:
Girlfriend was working at a pharmacy and stole like 500 of them, was and still is the biggest...