then sure you won;t have it work. If you only put DIN pin to the OG S-lite LED, it won't do anything since that LED only do blue light and it's not even a RGB LED. I think the guide should mention either you move the rp2040 led to the back next to OG LED or you buy and put extra ws2812b LED to get this mod work
then sure you won;t have it work. If you only put DIN pin to the OG S-lite LED, it won't do anything since that LED only do blue light and it's not even a RGB LED. I think the guide should mention either you move the rp2040 led to the back next to OG LED or you buy and put extra ws2812b LED to get this mod work
I've installed a picofly in a v2 switch, but when I tried turning it on, the battery is dead... I get blue, then 2 yellows, a long pause, then two more yellows. Does that mean it is a problem with reset or could it just be because the battery is low?
And is it safe to charge without all the heat sinks and the sd daughterboard?
I've installed a picofly in a v2 switch, but when I tried turning it on, the battery is dead... I get blue, then 2 yellows, a long pause, then two more yellows. Does that mean it is a problem with reset or could it just be because the battery is low?
And is it safe to charge without all the heat sinks and the sd daughterboard?
read important post link or second link in my sig there u have a morse code list where u can decrypt the morse code. that will tell u what the issue is. and its not just 2 yellow lights u have long and short
read important post link or second link in my sig there u have a morse code list where u can decrypt the morse code. that will tell u what the issue is. and its not just 2 yellow lights u have long and short
It's 2 short, then long pause before another 2 short. My confusion is that there is no code for 4 short, so I assume it's just repeating 2 short but I'm not certain.
(edit): I plan on testing the continuity between rst on the board and rst on the pico. The other possible issue is that I used the rst on the emmc daughterboard, so if it still doesn't work after charging and continuity test, I'll try and solder to the rst on the motherboard (it'll be a pain because it's right between two capacitors, that's why I used the rst on the emmc board).
It's 2 short, then long pause before another 2 short. My confusion is that there is no code for 4 short, so I assume it's just repeating 2 short but I'm not certain.
The diode left pad and 1st resistor right pad are all rst point since they all inter connected. I would feel more happy than pain to connect rst point in such area.
Got the rst connected like jkyoho said! It's now giving a "no glitch reaction" error. I'm using an hwfly cable, is there anything I can do to check or improve the functionality?
Got the rst connected like jkyoho said! It's now giving a "no glitch reaction" error. I'm using an hwfly cable, is there anything I can do to check or improve the functionality?
Here's some images of the install outside of the cpu, I'm going to wait a bit before looking in the cpu to give it time to cool down. (also I know it's really messy, I'm going to clean it all up once it's working.) (edit: partially related, do y'all have any advice for cleaning that copper pad up some?)
clean up ur solder make sure the enameld wires isnt touching anything else it seem ur cpu is laying on 2 solder spots if that couting is damaged that might be ur issue otherwise show some pics from ur mosfet install
Here's some images of the install outside of the cpu, I'm going to wait a bit before looking in the cpu to give it time to cool down. (also I know it's really messy, I'm going to clean it all up once it's working.) (edit: partially related, do y'all have any advice for cleaning that copper pad up some?)View attachment 386139View attachment 386141View attachment 386140
Here's the cable. I know it's really messy, I'm going to try and fix that with a toothbrush and maybe some q-tips.
I haven't cleaned up the solder points yet, but I'm going to wait on that since the issue seems to be with the cpu, as I don't get error codes for the connections to any of the other points.
Only just saw this, here's the emmc connection. As for touch up on the resistors, do you mean all of them or specifically dat0? and what exactly do you mean by touch up?
Here's the cable. I know it's really messy, I'm going to try and fix that with a toothbrush and maybe some q-tips.
I haven't cleaned up the solder points yet, but I'm going to wait on that since the issue seems to be with the cpu, as I don't get error codes for the connections to any of the other points.
Post automatically merged:
Only just saw this, here's the emmc connection. As for touch up on the resistors, do you mean all of them or specifically dat0? and what exactly do you mean by touch up?
Here's the cable. I know it's really messy, I'm going to try and fix that with a toothbrush and maybe some q-tips.
I haven't cleaned up the solder points yet, but I'm going to wait on that since the issue seems to be with the cpu, as I don't get error codes for the connections to any of the other points.
Post automatically merged:
Only just saw this, here's the emmc connection. As for touch up on the resistors, do you mean all of them or specifically dat0? and what exactly do you mean by touch up?
I mean this one. Touch up means you need to make a better soldering either adding flux or new solder to get solid connection to that resistor end. And you have to do something on the sp1 sp2 cap soldering LMAO
what u mean not having a guide? check my sig there is a guid pluse u did some how find out how to solder the rp2040 in correct? so u shouldve found a guide.....
It's been a while since Microsoft released the Xbox One, and despite its age, there haven't been any reliable softmod methods to hack the console. Until now. A post...
After several months of work, the Harbour Masters 64 team have released their first public build of 2Ship2Harkinian, a feature-rich Majora's Mask PC port. This comes...
Palmer Luckey is known for his pursuits into the world of virtual reality, having founded Oculus and designed the Rift VR headset. Prior to the $2 billion dollar...
The complete source code for the Super Nintendo Entertainment System (SNES) version of Doom has been released on archive.org. Although some of the code was partially...
Another day, another Nintendo DMCA takedown against fan-made content.
Just a few minutes ago, Nintendo issued a DMCA takedown notice against a widely known and...
After a little more than three years of exclusivity with the Epic Games Store, Square Enix has decided to bring their beloved Kingdom Hearts franchise to Steam. The...
Sony is once more attempting to reintroduce players to their older library of games by re-releasing classic PlayStation 2 titles onto the PlayStation Store. During...
Skyward Sword is a divisive title in the Zelda series. Hailed with praise at launch with a 93 Metacritic average, the game since received criticism for the...
We're super excited to announce that we have one of the new RG35XX SP retro emulation handhelds to give away to one lucky GBAtemp member!
If you haven't checked out...
The latest State of Play is here. This is PlayStation's Summer showcase, providing updates to new updates on upcoming games and brand new reveals. The 35-minute...
Palmer Luckey is known for his pursuits into the world of virtual reality, having founded Oculus and designed the Rift VR headset. Prior to the $2 billion dollar...
It's been a while since Microsoft released the Xbox One, and despite its age, there haven't been any reliable softmod methods to hack the console. Until now. A post...
That's right! It's time for the Summer showcase you've all been waiting for. A Nintendo Direct is about to air, bringing us 40 minutes of Nintendo Switch content. The...
After several months of work, the Harbour Masters 64 team have released their first public build of 2Ship2Harkinian, a feature-rich Majora's Mask PC port. This comes...
After all the waiting, Metroid Prime 4 has finally gotten a new trailer. A two-minute teaser shows off some long-awaited gameplay, and the visuals. The game also now...
Another day, another Nintendo DMCA takedown against fan-made content.
Just a few minutes ago, Nintendo issued a DMCA takedown notice against a widely known and...
Nintendo have officially announced a Nintendo Direct for tomorrow, June 18th.
The show will focus on Switch titles releasing this year and they have explicitly...
After a little more than three years of exclusivity with the Epic Games Store, Square Enix has decided to bring their beloved Kingdom Hearts franchise to Steam. The...
Sony is once more attempting to reintroduce players to their older library of games by re-releasing classic PlayStation 2 titles onto the PlayStation Store. During...
The latest State of Play is here. This is PlayStation's Summer showcase, providing updates to new updates on upcoming games and brand new reveals. The 35-minute...