as I said above, I killed my lite by bad soldeing. ended up tearing the clk pad clean offTrying buying directly from WaveShare. They charge $3 for bulk orders.
Post automatically merged:
Sorry but what killed your Lite? And does it get BOSD?
as I said above, I killed my lite by bad soldeing. ended up tearing the clk pad clean offTrying buying directly from WaveShare. They charge $3 for bulk orders.
Post automatically merged:
Sorry but what killed your Lite? And does it get BOSD?
Oh wow this was quite informative, thank you so much! :o although sounds like i would expend a lot of money that i might not have XD But thank you nonetheless!If you truly have an interest in learning to solder, look through the tools section of the PicoFly definitive guide and get all of those. Buy an Original Xbox and learn to TSOP mod it. Then move up to a 360 SLIM RGH3 mod (fats will RROD WAY more). After those, V1\2\Lite-PFly installs should just be 'one step up'. Then the final boss that is OLED.
This goes for anyone wanting to 'learn soldering' on PFly installs. IMO
I have exactly your situation with my lite.No - still can't get in to Hekate - but I'm now suspecting resistor values on D0/CLK/CMD.
That was just confirming that the diode specs don't matter too much.
Finally success! It wasn't smooth sailing though. After SDA/SCL not only was I still getting ==* but it also stopped booting into OFW with black screen and not even backlight. Disconnected the SDA/SCL wires and still nothing. While removing them I knocked off the Data0 wire from the resistor on the Pico and was a pain to resolder as it just wouldn't tin anymore. Finally got it on, but still==*.With the wires shortened as humanly possible (the Pico positioned on the top of the EMMC) and two caps with single MOSFET it still behaves the same way. Time to try the SDA/SCL option. Those are only data connections, so 0.1mm enamel wire should be fine, right? Does it matter how the wires are routed, on the back of the MB or through the front; it seems to be the same to me, but then again I'll be doing it for a first time so no idea if it makes a difference?
Please use search. We have been through this a couple of times.
Here you go: ] and then VERY IMPORTANT part by jkyoho here->
There is work to be done but it can be fixed (like most of the things)
P.S. you can skip the top component on those pictures (nr1) because your board doesn't have that
Im glad you managed to fix that, it probably wasn't an easy thing to doMany thanks, solved by soldering PIN 2 emmc socket to the good remaining rst pad
Wow excellent work. So it is 1mm length = 0402. I had trouble finding it yesterday but thanks to you, I have the exact transistor code now. Thank you @QuiTim . Though its bitter sweet because it won't fix the blue screen but needs replacing anyway.I think I finally got the bastard
You are welcome. Your measurement from previous post was crucial in narrowing the search down. Now this info is part of the thread and Whosoever uses Search, they will be worthy and shall possess the power of this knowledgeWow excellent work. So it is 1mm length = 0402. I had trouble finding it yesterday but thanks to you, I have the exact transistor code now. Thank you @QuiTim . Though its bitter sweet because it won't fix the blue screen but needs replacing anyway.
Edit - Does anyone here think investing in a thermal cam would be a good idea in detecting causes for blue screen or pink screen of death? Would it be wise or even work?
Lol. Yep, people will be better off because of us and yes, I've seen Northridge fix use that pen. But I'm a risk taker and don't mind skipping a meal to get the job done so I think I'm getting a thermal cam. Potentially help this community out better too, in the long run. Just think....what would Robin Hood do...........You are welcome. Your measurement from previous post was crucial in narrowing the search down. Now this info is part of the thread and Whosoever uses Search, they will be worthy and shall possess the power of this knowledge
Regarding the thermal camera, If I had the money I would buy it, but I would also buy an Armadillo Girdled Lizard (they look fu*kin awesome) because I love spending money on things I might never use but are cool to have.
On the technical side of things I think that something like this https://a.aliexpress.com/_msYQRBa might get the job done.
Joking aside, if you do this professionally, as a business, I think that thermal cam is an awesome piece of equipment to have.
A very unique setup might I say. Congrats.I had some Flex V1 left. A single mosfet always error. 2 flex v1 ok. Perfect start.
Robin Hood would help you spend your money for the good of the peopleLol. Yep, people will be better off because of us and yes, I've seen Northridge fix use that pen. But I'm a risk taker and don't mind skipping a meal to get the job done so I think I'm getting a thermal cam. Potentially help this community out better too, in the long run. Just think....what would Robin Hood do...........
It's supposed to be green from 2.7 onward or better to say The colors don't matter anymoreI bridge the rgb jumper on the rp 2040 but when I flash it still green I've reset the wire like 10 times using 30awg tinned copper wire
Found a cheaper one else where and got it. Hopefully should be able to diagnose and fix the lite and subsequently others who have the exact same problem as me. Unless it's an emmc issue, then we're screwed. But for now.....we wait.Robin Hood would help you spend your money for the good of the people
This looks nice and portable: https://shop.thermal.com/compact-pro-ff-android-usb-c
Was following the og one didn't know the pdf but I got it to flash red any thanks can't ask simple question to get a simple answer thansk againIt's supposed to be green from 2.7 onward or better to say The colors don't matter anymore
Why not read the Guide before attempting this bro..
You are welcome. It was easier for me to write "that light is OK" but if I've given a simple answer you wouldn't know about the latest PDF and maybe somewhere along the run you might make a mistake that bricks your switch and no one here wants to see people mess up otherwise we wouldn't be here.Was following the og one didn't know the pdf but I got it to flash red any thanks can't ask simple question to get a simple answer thansk again
of note a pink/purple screen is usually a failed resistor on cmd? from memory.Wow excellent work. So it is 1mm length = 0402. I had trouble finding it yesterday but thanks to you, I have the exact transistor code now. Thank you @QuiTim . Though its bitter sweet because it won't fix the blue screen but needs replacing anyway.
Edit - Does anyone here think investing in a thermal cam would be a good idea in detecting causes for blue screen or pink screen of death? Would it be wise or even work?
Yes. BTW I saw a video where where a guy removed the emmc shield and it turned his switch from black screen to blue. Found that weird. How? Why?of note a pink/purple screen is usually a failed resistor on cmd? from memory.