Hacking Hardware Picofly - a HWFLY switch modchip

[cowboy619]

Longshot but would 47k resistors work? Turns out Digikey didn't filter my resistance option well and 47k got into the mix of results and it was the cheapest......

between 47 and 50 is good

 

[Hayato213]

Longshot but would 47k resistors work? Turns out Digikey didn't filter my resistance option well and 47k got into the mix of results and it was the cheapest......

You need 47 to 50 ohm.

 

[JackFrostSMT]

Great. So I have 1,000 useless resistors....... Looks like I'll junk these and re-order. Will be using emummc tomorrow then

 

[TenshoWang]

Hello, I recently learned about the method of replacing HWFLY with RP2040, but even the latest 2.5 version is not perfect, and there are many small problems. Excuse me, when will the 2.6 version update? I have already started looking forward to version 2.6 (using machine translation, there may be grammatical errors)

 

[impeeza]

Hello, I recently learned about the method of replacing HWFLY with RP2040, but even the latest 2.5 version is not perfect, and there are many small problems. Excuse me, when will the 2.6 version update? I have already started looking forward to version 2.6 (using machine translation, there may be grammatical errors)

Of course there are rough edges, everyone on the community is welcomed to get on a IDE and start coding, that's the great of temp community.

 

[TenshoWang]

Of course there are rough edges, everyone on the community is welcomed to get on a IDE and start coding, that's the great of temp community.

(I don't know why, this forum does not seem to be able to send Chinese.) Whether it will be used to use SD CARD update in version 2.6 instead of USB update. This is the most important problem before the completion of the firmware before HWFly, because if the USB interface is not removed, my switch cannot be assembled back. If the USB interface is removed, it will not be updated to the new 2.6 version of the firmware.

 

[overson]

SWITCH LITE has been working with RP2040, but the volume+key has failed. What is the reason for this?

Post automatically merged: Mar 24, 2023

RP2040 has been working in switch lite, but the volume"+"button has failed. Has anyone encountered this problem?

 

[TenshoWang]

SWITCH LITE has been working with RP2040, but the volume+key has failed. What is the reason for this?

Post automatically merged: Mar 24, 2023

RP2040 has been working in switch lite, but the volume"+"button has failed. Has anyone encountered this problem?

(I do n’t know why, this forum does not seem to be able to send Chinese, I can only use Google to translate after sending it.) It seems that this problem is written on the page of downloading firmware, but I don’t understand English. Accurate, let me copy it

 

[DangerMouse]

is it possible to mod a v1 flex to work on a v2 board? I guess I could just remove the mosfet and solder to cap on processor but would prefer a flex if possible and I have a spare v1 lying about

 

[Hayato213]

(I do n’t know why, this forum does not seem to be able to send Chinese, I can only use Google to translate after sending it.) It seems that this problem is written on the page of downloading firmware, but I don’t understand English. Accurate, let me copy it

This is an English speaking site.

 

[TenshoWang]

SWITCH LITE has been working with RP2040, but the volume+key has failed. What is the reason for this?

Post automatically merged: Mar 24, 2023

RP2040 has been working in switch lite, but the volume"+"button has failed. Has anyone encountered this problem?

Spoiler: Reboot to OFW / Vol+ & Vol- doesn't work, blue/black screen
Answer：Boot into Full Stock and perform a full system reset.

 

[maaaake]

good! I like!

 

[overson]

(I do n’t know why, this forum does not seem to be able to send Chinese, I can only use Google to translate after sending it.) It seems that this problem is written on the page of downloading firmware, but I don’t understand English. Accurate, let me copy it

Can't send Chinese, just send the machine to translate, HAHA

 

[TenshoWang]

This is an English speaking site.

I know, but I don't know if the Google translation can accurately express my meaning. I tried to attach my original Chinese text behind, but it will be warned that it contains prohibited words

Post automatically merged: Mar 24, 2023

Can't send Chinese, just send the machine to translate, HAHA

You are Chinese？

 

[Hayato213]

I know, but I don't know if the Google translation can accurately express my meaning. I tried to attach my original Chinese text behind, but it will be warned that it contains prohibited words

Post automatically merged: Mar 24, 2023

You are Chinese？

Yes I am Chinese, this site is an English speaking site, you can post in Chinese but you also need to provide a translation.

 

[overson]

I know, but I don't know if the Google translation can accurately express my meaning. I tried to attach my original Chinese text behind, but it will be warned that it contains prohibited words

Post automatically merged: Mar 24, 2023

You are Chinese？

YES

 

[SkylerTakashi]

Longshot but would 47k resistors work? Turns out Digikey didn't filter my resistance option well and 47k got into the mix of results and it was the cheapest......

Lol happened to me also, ordered 470K and can't cancel it

 

[TenshoWang]

Yes I am Chinese, this site is an English speaking site, you can post in Chinese but you also need to provide a translation.

Your profile tells me that you are an American. I just joined this forum. I don’t know why the response to your question and asking another brother's question will be merged together, causing you to answer this question

 

[Hayato213]

Your profile tells me that you are an American. I just joined this forum. I don’t know why the response to your question and asking another brother's question will be merged together, causing you to answer this question

That happens when you reply to two people questions before someone else reply to the thread.

 

[TenshoWang]

是的，我是中国人，这个网站是一个英语网站，你可以用中文发帖，但你也需要提供翻译。

Of course I will provide English response to Google translated and arrange it in front of Chinese. But when I am afraid that when the machine translation is inaccurate and want to add Chinese, the forum will tell me that the content contains prohibited words, which makes me not add the original Chinese text I said.

Post automatically merged: Mar 24, 2023

That happens when you reply to two people questions before someone else reply to the thread.

Thanks
谢谢你