Hacking NOOB PARADISE - ask away

  • Thread starter Thread starter richglix
  • Start date Start date
  • Views Views 1,696,759
  • Replies Replies 15,247
  • Likes Likes 14
fattest said:
I've been out of the scene for a while and need to update someone's Wii. What is the best version of d2x and wiiflow to use? Are there any other major cIOS updates within the last few months?
Config is still the best loader for compatibility, so I don't know what revision of WiiFlow you would want. As far as cIOS's, you want this setup:
202[60]v5.1 rodries mod
222[38]v4
223[38+37]v4
224[57]v5.1 rodries mod
249[56] d2x v6
250[57] d2x v6
 
JoostinOnline said:
Config is still the best loader for compatibility, so I don't know what revision of WiiFlow you would want. As far as cIOS's, you want this setup:
202[60]v5.1 rodries mod
222[38]v4
223[38+37]v4
224[57]v5.1 rodries mod
249[56] d2x v6
250[57] d2x v6

Thanks. Gonna stick with wiiflow since it's what the person I'm doing this for is used to. Did a quick look through the wiiflow sticky and got an idea of what I need now. Too bad wiimc doesn't seem to be active anymore, the proposed gui mockups looked a lot better.
 
fattest said:
JoostinOnline said:
Config is still the best loader for compatibility, so I don't know what revision of WiiFlow you would want. As far as cIOS's, you want this setup:
202[60]v5.1 rodries mod
222[38]v4
223[38+37]v4
224[57]v5.1 rodries mod
249[56] d2x v6
250[57] d2x v6

Thanks. Gonna stick with wiiflow since it's what the person I'm doing this for is used to. Did a quick look through the wiiflow sticky and got an idea of what I need now. Too bad wiimc doesn't seem to be active anymore, the proposed gui mockups looked a lot better.
It is still semi-active. The GUI is just like all the screenshots. Do you have v1.1.8?
 
I've managed to fix the problem with my Wiimote by re-syncing it, but now I have another problem in that I can't use the Yu-Gi-Oh! exploit to re-mod my PAL Wii and I'm still not too sure what cIOS I need to use for the more recent games.

EDIT: I've finally managed to get into Priiloader via Multi-Mod Manager and enabled the mods concerning system updates.
 
Ok it's been a long time since I have used my wii and want to run Xenoblade Chronicles but each time I boot it it simply says "reading disc" and will either keep saying that or return back to the wii menu. I get the feeling my wii is a mess and I need to sort out what ios I have installed but am lost in what to change, can anybody help?


sysCheck v2.0.1 by Double_A
...runs on IOS56 (rev 5405).

Region: PAL
System Menu 3.2E (v290)
Hollywood v0x11
Console ID: 68240920
Boot2 v2

Found 128 titles.
Found 29 IOS on this console. 0 of them are stub.

IOS4 (rev 3): Trucha Bug ES Identify Flash Access NAND Access
IOS9 (rev 516): Trucha Bug ES Identify Flash Access NAND Access
IOS11 (rev 10): Trucha Bug ES Identify Flash Access NAND Access
IOS12 (rev 6): Trucha Bug ES Identify Flash Access NAND Access
IOS13 (rev 10): Trucha Bug ES Identify Flash Access NAND Access
IOS14 (rev 257): Trucha Bug ES Identify Flash Access NAND Access
IOS15 (rev 260): Trucha Bug ES Identify Flash Access NAND Access
IOS17 (rev 512): Trucha Bug ES Identify Flash Access NAND Access
IOS20 (rev 12): Trucha Bug ES Identify Flash Access NAND Access
IOS21 (rev 517): Trucha Bug ES Identify Flash Access NAND Access
IOS22 (rev 772): Trucha Bug ES Identify Flash Access NAND Access
IOS28 (rev 1288): Trucha Bug ES Identify Flash Access NAND Access
IOS30 (rev 1040): Trucha Bug ES Identify Flash Access NAND Access
IOS31 (rev 1040): Trucha Bug ES Identify Flash Access NAND Access
IOS33 (rev 1040): Trucha Bug ES Identify Flash Access NAND Access
IOS34 (rev 1039): Trucha Bug ES Identify Flash Access NAND Access
IOS35 (rev 1040): Trucha Bug ES Identify Flash Access NAND Access
IOS36 (rev 1042): Trucha Bug ES Identify Flash Access NAND Access
IOS37 (rev 2070): ES Identify
IOS38 (rev 3609): No Patches
IOS53 (rev 4113): No Patches
IOS55 (rev 4633): No Patches
IOS56 (rev 5405): No Patches
IOS236 (rev 65535): Trucha Bug ES Identify NAND Access
IOS247 (rev 21006): Trucha Bug NAND Access USB 2.0
IOS248 (rev 21006): Trucha Bug NAND Access USB 2.0
IOS249 (rev 21006): Trucha Bug NAND Access USB 2.0
IOS250 (rev 65535): Trucha Bug NAND Access USB 2.0
IOS254 (rev 65281): BootMii
BC v2
MIOS v5

Report generated on 2011/08/21.
 
Is there anyway to get the data off my backed up SSBB disk? My new wii can't read DVD -R disks and I don't think that the disk drive in PCs can read wii disks either. What can I do?
 
forget the backup disk and simply rip the original with you usb-loader of choise

your pc could read burned wii discs
only originals make problems
but this is more error prone due to burn and read errors
 
I need urgent help! I put my SMG2 disk into my PC and now the drive isn't coming out. What should I do to eject it?
 
fattest said:
Yes. I'm talking about this.Oh, that was never official, so it's not something you would expect to be released.
mada193 said:
Ok it's been a long time since I have used my wii and want to run Xenoblade Chronicles but each time I boot it it simply says "reading disc" and will either keep saying that or return back to the wii menu. I get the feeling my wii is a mess and I need to sort out what ios I have installed but am lost in what to change, can anybody help?


sysCheck v2.0.1 by Double_A
...runs on IOS56 (rev 5405).

Region: PAL
System Menu 3.2E (v290)
Hollywood v0x11
Console ID: 68240920
Boot2 v2

Found 128 titles.
Found 29 IOS on this console. 0 of them are stub.

IOS4 (rev 3): Trucha Bug ES Identify Flash Access NAND Access
IOS9 (rev 516): Trucha Bug ES Identify Flash Access NAND Access
IOS11 (rev 10): Trucha Bug ES Identify Flash Access NAND Access
IOS12 (rev 6): Trucha Bug ES Identify Flash Access NAND Access
IOS13 (rev 10): Trucha Bug ES Identify Flash Access NAND Access
IOS14 (rev 257): Trucha Bug ES Identify Flash Access NAND Access
IOS15 (rev 260): Trucha Bug ES Identify Flash Access NAND Access
IOS17 (rev 512): Trucha Bug ES Identify Flash Access NAND Access
IOS20 (rev 12): Trucha Bug ES Identify Flash Access NAND Access
IOS21 (rev 517): Trucha Bug ES Identify Flash Access NAND Access
IOS22 (rev 772): Trucha Bug ES Identify Flash Access NAND Access
IOS28 (rev 1288): Trucha Bug ES Identify Flash Access NAND Access
IOS30 (rev 1040): Trucha Bug ES Identify Flash Access NAND Access
IOS31 (rev 1040): Trucha Bug ES Identify Flash Access NAND Access
IOS33 (rev 1040): Trucha Bug ES Identify Flash Access NAND Access
IOS34 (rev 1039): Trucha Bug ES Identify Flash Access NAND Access
IOS35 (rev 1040): Trucha Bug ES Identify Flash Access NAND Access
IOS36 (rev 1042): Trucha Bug ES Identify Flash Access NAND Access
IOS37 (rev 2070): ES Identify
IOS38 (rev 3609): No Patches
IOS53 (rev 4113): No Patches
IOS55 (rev 4633): No Patches
IOS56 (rev 5405): No Patches
IOS236 (rev 65535): Trucha Bug ES Identify NAND Access
IOS247 (rev 21006): Trucha Bug NAND Access USB 2.0
IOS248 (rev 21006): Trucha Bug NAND Access USB 2.0
IOS249 (rev 21006): Trucha Bug NAND Access USB 2.0
IOS250 (rev 65535): Trucha Bug NAND Access USB 2.0
IOS254 (rev 65281): BootMii
BC v2
MIOS v5

Report generated on 2011/08/21.
Your Wii is extremely out of date. Use ModMii to rehack it and update all your IOS's, as well as install Priiloader to block updates.
Please use spoiler tags next time you post a syscheck.
Zorua said:
Is there anyway to get the data off my backed up SSBB disk? My new wii can't read DVD -R disks and I don't think that the disk drive in PCs can read wii disks either. What can I do?
You will need to put the original disc in your Wii and use WiiXplorer to extract files.
QUOTE(DanglinDave @ Aug 21 2011, 11:16 AM)
since i started usb CFG, i can't play my official SSBB without updating but im afraid to update
Cfg skips updates.
 
DanglinDave said:
im not loading it from the usb its the actually smash bros disc
Then why did you say you were using Cfg?

Either way, you need to install Priiloader and enable the block disc/online update hacks. If you don't know how to do it, just rehack your Wii with ModMii. It should be a pretty past process.
 
sorry i didnt clarify enough, i meant it started when i started using cfg, but also, thanks for the help, i ll use priiloader
 
Can someone help me with something:
I have a 2.5tb hard drive. Whenever it is plugged in (either port) it crashes on WiiMC. But it works on USB Loader GX just fin. As soon as I launch WiiMC, I will see the screen for a sec then it will crash. I didn't want to create a new post, I already reported it in the WiiMC forums but I'm not getting any help anywhere. Is there a fix for this?

http://imageshack.us/photo/my-images/263/2...1656312341.jpg/
 
How can I change themes on my Wii and is it safe. I am running firmware version 4.3E and i hacked my wii using the ''Hack any Wii 4.3 and below'' guide, so i have priiloader.
 
JoostinOnline said:
Zorua said:
I get error ret = -2011 when trying to install wads. I'm on 4.3e. How do I fix this?
You need a patched IOS or AHBPROT. Try using the latest version of Wii Mod, since it has the network fix.
Can someone link me to Wii Mod? Google is giving very generic results.
 

Site & Scene News

Popular threads in this forum