mod libogc patched with 3rd party classic controller fix. Used for the wii emulators could this mod be added to help those with 3rd party wii remotes ? Not sure if the latest updates addressed this issue already as I have original remotes only.
Whatever is causing the issue, if it affects NTSC Wii games, then it is definitely not a problem with Nintendont. Something else in your setup (your television, your cables, your Wii's video encoder, etc.) isn't handling the NTSC color signal properly.ok, do you know how i can remove the red tint?
Thank you! It workedmaybe you have too many wiimotes registered on the wii and your sync storage is filled up? I remember you can reset the storage by holding down the sync button on the wii
A little irrelevant but it seems WiiU mod is getting hack (unless it was hacked a while and I didn't know) I won't mention any details since it could be risky to discuss here and I could be wrong, but let's just say WiiU isos been hacked recently, data been ripped, edited, changed, and so on, I hope if Wii U mode gets hacked a Wii U controller support will be added, but don't take my word for it.
We're already seeing progress, but this isn't the place to talk about this anyway, I really don't care to "pirate" these games as much as I wanna have a "back up" of my Wii U collection on an external hard drive to be safe and ready to play.Oh? Heh heh heh, glad to hear people working on it more and more.
Your going to get the same response every time. If your a competitive melee player then you should be using this on a Wii with Native Controls turned on. Seriously the only people who experience this "lag" is competitive smash players.
i doubt any ssbm community would host tournaments on wiiu makes no sence... i see no reason why.This is unfortunate as the melee community would greatly benefit from having this functionality. This would save tournament organizes the hassle of carrying around multiple systems, on top of that higher quality broadcasts/playing experience would be amazing. I thought Howard was looking into since it has been confirmed that the problem has to do with how the adapter works. Many individuals including myself would not mind donating to see what can be done to minimize or possibly eliminate this lag. The competitive melee community is very large.
Good evening and happy new year to all. For those who might have encountered the same problem as the one I described a few weeks before (no PAL60 or progressive on a PAL Wii for certain games), I wanted to tell you I found out that, sometimes, leaving the video setting as "disc by default" and putting "progressive patch" as on/active gives better result than forcing PAL60 or MPAL. That's how I managed to get Starfox Adventure work on progressive :-) So far only a few games (Tales of, Baten Kaitos, Eternal Darkness) are still stucked on 50hz or buggy at 60hz and progressive, but that's a big improvement ! Hope it will help somes. Cheers to all !
The way I left this with the last people that were asking for reduced lag in meele was for them to run verry specific tests to determine whare the lag was coming from. To date they have not gotten back to me.This is unfortunate as the melee community would greatly benefit from having this functionality. This would save tournament organizes the hassle of carrying around multiple systems, on top of that higher quality broadcasts/playing experience would be amazing. I thought Howard was looking into since it has been confirmed that the problem has to do with how the adapter works. Many individuals including myself would not mind donating to see what can be done to minimize or possibly eliminate this lag. The competitive melee community is very large.
]The way I left this with the last people that were asking for reduced lag in meele was for them to run verry specific tests to determine whare the lag was coming from. To date they have not gotten back to me.
I'm having troubles with adding a controller
I have a usb/360 to ps2 adapter
I put the ps2 controller.ini in the main sd folder and made a app folder. when loading the hdtest (renamed boot.dol) I get digitalllr multiin power power all not found and getting list of hid compatible devices. I'm totally lost and don't know what to do. Help would be appreciated. Thank you.
does it matter what usb port the controller is plugged in to on the wii u? is a 2 usb y splitter cable needed with the controller?
thanks for your help. It's a shame HIDtest locks up the console and I have to unplug it to restart the system.
it's a ebay knock off of the xtokki 360 converter
<snip>