Hacking Nintendont

[NekoKat]

Yeah, that blows, I had the same issue, no real way around it, some TVs simply have issues with those games with unorthodox resolutions; not sure what else to tell ya...sorry, man. As for the waverbirds? No idea, I've tested all games on a wired controller.

Yeah, I understand. Oh well, retrogaming is best-enjoyed on CRT TVs anyway, I'll hook my Wii on an old TV next time I wanna play X games. As for Wave Bird controller, so far these 2 megaman games gave me this issue, strangely enough. o_o Other games I've played (Wind Waker, Legend of Spyro, Capcom vs. SNK 2 EVO) don't have this issue.

 

[the_randomizer]

Yeah, I understand. Oh well, retrogaming is best-enjoyed on CRT TVs anyway, I'll hook my Wii on an old TV next time I wanna play X games. As for Wave Bird controller, so far these 2 megaman games gave me this issue, strangely enough. o_o Other games I've played (Wind Waker, Legend of Spyro, Capcom vs. SNK 2 EVO) don't have this issue.

You'd best report them or, well, you kinda already did, hopefully they will be fixed, but it might not be for a while.

 

[sonictopfan]

I can confirm Megaman X Collection works fine, 1:1 iso

On a similar news, I just tested 10 new games, here are the results:
-Bonk's Adventure (working)
-Cubic Lode Runner (working)
-Ed Edd N Eddy - The Mis-Edventures (working)
-Flushed Away (working)
-Namco Museum (black screen from beginning, works fine in DM except for audio streaming)
-Phantasy Star Online Episode III - C.A.R.D. Revolution (black screen)
-Robocop Aratanaru Kiki (working)
-Star Soldier (working)
-Worms 3D (working)
-Worms Blast (hangs on the loading screen "confirm?")

If it helps I'll list my entire collection marking what's working and what's having issues, but I tend to report broken games only atm!

 

[NekoKat]

I can confirm Megaman X Collection works fine, 1:1 iso
On a similar news, I just tested 10 new games, here are the results:
-Bonk's Adventure (working)
-Cubic Lode Runner (working)
-Ed Edd N Eddy - The Mis-Edventures (working)
-Flushed Away (working)
-Namco Museum (black screen from beginning, works fine in DM except for audio streaming)
-Phantasy Star Online Episode III - C.A.R.D. Revolution (black screen)
-Robocop Aratanaru Kiki (working)
-Star Soldier (working)
-Worms 3D (working)
-Worms Blast (hangs on the loading screen "confirm?")

If it helps I'll list my entire collection marking what's working and what's having issues, but I tend to report broken games only atm!

Used Composite or Component Cables? o: In my case, on Composite works perfectly, but Component has a issues, native to the game being on the original SNES and PSX resolutions (similar to NES and SNES games on virtual console through Component)

 

[the_randomizer]

Used Composite or Component Cables? o: In my case, on Composite works perfectly, but Component has a issues, native to the game being on the original SNES and PSX resolutions (similar to NES and SNES games on virtual console through Component)

I don't know how I was able to play the game on component video, but it's also dependent on the TV, as it might be scaling to 480i for the Snes/PSX games. If you have a CRT with RGB inputs, it might work fine as well.

 

[Plstic]

Some Modern TVs don't like scaling 240p. That's why they arn't working.

 

[quepaso]

Puyo Pop Fever, the game stop responding to the wavebird controls after a few minutes. On 2.148

 

[Gidy]

Some Modern TVs don't like scaling 240p. That's why they arn't working.

Is this true? I'm using a Samsung HDTV and my games keep on freezing, not just melee. In Dragon World from Budokai 2 it freezes and Melee can freeze whenever. What should I do?

Also, I used a friends Melee disk and ripped the ISO. It still freezes.

 

[SuperrSonic]

Puyo Pop Fever, the game stop responding to the wavebird controls after a few minutes. On 2.148

Sonic Adventure DX and some demo games have this problem too. It started happening with v1.131 so use v1.130, please confirm back if it works fine on that version.

Is this true? I'm using a Samsung HDTV and my games keep on freezing, not just melee.

That's not related, most HDTVs can't handle 240p signals, i.e. you don't see any output.
Megaman X Collection does work with component cables on EDTVs, it does on mine at least.

Also, I used a friends Melee disk and ripped the ISO. It still freezes.

When you used CleanRip to do it did it say it verified OK?

 

[Gidy]

Sonic Adventure DX and some demo games have this problem too. It started happening with v1.131 so use v1.130, please confirm back if it works fine on that version.


That's not related, most HDTVs can't handle 240p signals, i.e. you don't see any output.
Megaman X Collection does work with component cables on EDTVs, it does on mine at least.


When you used CleanRip to do it did it say it verified OK?

Yeah

 

[pedro702]

I can confirm Megaman X Collection works fine, 1:1 iso

On a similar news, I just tested 10 new games, here are the results:
-Bonk's Adventure (working)
-Cubic Lode Runner (working)
-Ed Edd N Eddy - The Mis-Edventures (working)
-Flushed Away (working)
-Namco Museum (black screen from beginning, works fine in DM except for audio streaming)
-Phantasy Star Online Episode III - C.A.R.D. Revolution (black screen)
-Robocop Aratanaru Kiki (working)
-Star Soldier (working)
-Worms 3D (working)
-Worms Blast (hangs on the loading screen "confirm?")

If it helps I'll list my entire collection marking what's working and what's having issues, but I tend to report broken games only atm!

i played like 8 worms blast ntsc levels with no issue so maybe check your iso? i used full iso.

 

[dreamon]

i believe it would be much better if you guys can also add the region codes to your posts. it gets confusing after a while.
European, American and Japanese releases are pretty much different from each other when it comes to compatibility.
then it will be easier for us to help when you have a problem with a specific title.

 

[nakata6790]

For SADX use r127 it works good (as in, it does not disconnect).

If it helps I'll list my entire collection marking what's working and what's having issues, but I tend to report broken games only atm!

Yes a list/pic is the best cause it shows what region of the game you play, as well as what games are working in general. So...
*removed picture*

 

[airline38]

So far there is still a game region (JPN) problem for multi saves
memory card file. JPN games need to have an independent memory
card file.

The EXI.c (kernel) and main.c (loader) have to be slightly modified.
For example:

if ((GameID & 0xFF) == 0x4A )  // JPN games
memcpy(MemCardName, "ninmej.raw", 10);
else
memcpy(MemCardName, "ninmem.raw", 10);

Pls consider this for the next release.

 

[Bentonoise7]

Graphics looks very bad in - Need For Speed Underground 2 - seems like missing filters or something

 

[sonictopfan]

i played like 8 worms blast ntsc levels with no issue so maybe check your iso? i used full iso.

I expected that it's my issue, I downloaded another clean rip to test it again!

Used Composite or Component Cables? o: In my case, on Composite works perfectly, but Component has a issues, native to the game being on the original SNES and PSX resolutions (similar to NES and SNES games on virtual console through Component)

I used regular AV cables, my TV is regular 4:3 one!

For SADX use r127 it works good (as in, it does not disconnect).





Yes a list/pic is the best cause it shows what region of the game you play, as well as what games are working in general. So...

*don't quote stupidity*

Oh man, I'll do it then, I love Ben Steler!

 

[Plushieluver101]

Just to note: I no longer need help with Nintendont, as I'm using USB Loader GX now on my Wii. I'm having a few issues with that, however, so I'll be asking in that thread on what I need to do, and such, so thanks Just a heads up, I suppose~

 

[Bentonoise7]

1080 Avalanche (Usa Version) random freezes while playing.
EUR Version less freezing.

 

[VashTS]

So far there is still a game region (JPN) problem for multi saves
memory card file. JPN games need to have an independent memory
card file.

The EXI.c (kernel) and main.c (loader) have to be slightly modified.
For example:

if ((GameID & 0xFF) == 0x4A )  // JPN games
memcpy(MemCardName, "ninmej.raw", 10);
else
memcpy(MemCardName, "ninmem.raw", 10);

Pls consider this for the next release.

This is what i was afraid of! I booted a jap game in DM and since i cannot read the language i think i formatted my real MC

went to copy my madden 08 save from the real mc to the MCemu from nintendont and no saves found. luckily i already pulled my Super Mario Sunshine save

 

[Disorarara]

Is there any reason why 2 usb controllers won't work?