Hacking Nintendont

[kingdsx]

I am still using the USB beta 7 that was originally released by overjoy without the source code. It seems to have lost compatibility with Rayman 3: Hoodlum Havoc completely (black screen on start). On r38, it was loading to the menu screen properly (not sure if controller didn't register or what it was, but i couldn't go beyond the menu). I will load up r44 later this week and test.

 

[Enigma Hall]

Had test with a flash adapter, same issue Cheking FS. I think is something with the ios. Maybe mine is old. Will try it later

 

[JnL_SSBM]

I have a Third-Party PS3 controller works successfully on HIDTestv4, but the controller_ps3.ini (obviously renamed controller.ini) on the root of the device where my games are located, on my USB, but freezes at loading or Reboots the Wii U completely.

 

[jammybudga777]

Wind Waker and Double Dash both work. Melee has some problems and will freeze fast. Try to load wind waker again and see what happens

okay i gave it a try 3 times last night but zelda would not work. it gets past loading main.dol and then just sits with a black screen. the only thing i can think of being an issue is im using a 1.5TB hard drive!! the second the dol loads my hard drive light stops flashing

 

[Howard]

Trying to compile and keep getting errors.
What am I missing?

Spoiler

> "C:\Sources\Nintendont\Build.bat"
Building Nintendont Kernel (USB)
DEP usb_os.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP tiny_ehci_glue.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP string.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP vsprintf.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP main.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP NAND.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP ES.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP Config.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP diskio.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP HID.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP ff.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP EXI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP StreamADPCM.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP Patch.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP DI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP FST.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP gecko.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP alloc.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP common.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
rm -f *.elf *.o *.bin *.d *.map
DEP usb_os.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP tiny_ehci_glue.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP string.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP vsprintf.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP syscalls.d
DEP main.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP NAND.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP ES.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP utils_asm.d
DEP Config.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP diskio.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP HID.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP ff.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP EXI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP StreamADPCM.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP Patch.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP DI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP FST.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP gecko.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP alloc.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP common.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP start.d
DEP usb_os.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP tiny_ehci_glue.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP string.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP vsprintf.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP main.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP NAND.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP ES.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP Config.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP diskio.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP HID.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP ff.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP EXI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP StreamADPCM.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP Patch.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP DI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP FST.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP gecko.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP alloc.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP common.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
AS start.o
make: /bin/arm-eabi-gcc: Command not found
make: *** [start.o] Error 127
Building Nintendont Kernel (SD)
DEP SDI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP string.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP vsprintf.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP main.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP NAND.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP ES.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP Config.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP diskio.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP HID.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP ff.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP EXI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP StreamADPCM.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP Patch.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP DI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP FST.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP gecko.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP alloc.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP common.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
rm -f *.elf *.o *.bin *.d *.map
DEP SDI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP string.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP vsprintf.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP syscalls.d
DEP main.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP NAND.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP ES.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP utils_asm.d
DEP Config.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP diskio.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP HID.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP ff.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP EXI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP StreamADPCM.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP Patch.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP DI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP FST.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP gecko.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP alloc.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP common.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP start.d
DEP SDI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP string.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP vsprintf.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP main.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP NAND.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP ES.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP Config.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP diskio.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP HID.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP ff.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP EXI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP StreamADPCM.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP Patch.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP DI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP FST.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP gecko.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP alloc.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP common.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
AS start.o
make: /bin/arm-eabi-gcc: Command not found
make: *** [start.o] Error 127
Building Nintendont Loader
clean ...
kernel.bin
bin2s -a 32 /c/Sources/Nintendont/loader/data/kernel.bin | powerpc-eabi-as -o kernel.bin.o
echo "extern const u8" `(echo kernel.bin | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`"_end[];" > `(echo kernel.bin | tr . _)`.h
echo "extern const u8" `(echo kernel.bin | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`"[];" >> `(echo kernel.bin | tr . _)`.h
echo "extern const u32" `(echo kernel.bin | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`_size";" >> `(echo kernel.bin | tr . _)`.h
kernel_usb.bin
bin2s -a 32 /c/Sources/Nintendont/loader/data/kernel_usb.bin | powerpc-eabi-as -o kernel_usb.bin.o
echo "extern const u8" `(echo kernel_usb.bin | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`"_end[];" > `(echo kernel_usb.bin | tr . _)`.h
echo "extern const u8" `(echo kernel_usb.bin | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`"[];" >> `(echo kernel_usb.bin | tr . _)`.h
echo "extern const u32" `(echo kernel_usb.bin | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`_size";" >> `(echo kernel_usb.bin | tr . _)`.h
FPad.c
Patches.c
dip.c
exi.c
font.c
global.c
loader.c
c:/Sources/Nintendont/loader/source/loader.c: In function 'LoadGame':
c:/Sources/Nintendont/loader/source/loader.c:82:12: warning: assignment makes pointer from integer without a cast [enabled by default]
c:/Sources/Nintendont/loader/source/loader.c:96:2: warning: passing argument 1 of 'app_entry' from incompatible pointer type [enabled by default]
c:/Sources/Nintendont/loader/source/loader.c:96:2: note: expected 'int (**)(const char *)' but argument is of type 'void (**)(int (*)(const char *))'
main.c
menu.c
linking ... loader.elf
output ... loader.dol
Press any key to continue . . .

 

[ShadowOne333]

Hmm my GC game boots then freezes at "Init HID Devices..."

Also having the same issue.
I can't get anything from the HID Test v4 either with the Madcatz Xbox360 controller connected to the front USB ports of the Wii U.

Any ideas why the 'Init HID...' error happens?
It just freezes when it reaches that initialization, I have to disconnected the Wii U to restart it.

 

[pedro702]

Also having the same issue.
I can't get anything from the HID Test v4 either with the Madcatz Xbox360 controller connected to the front USB ports of the Wii U.

Any ideas why the 'Init HID...' error happens?
It just freezes when it reaches that initialization, I have to disconnected the Wii U to restart it.

cant use the fornt usb doors on the wiiu only the 2 back doors

its like wiiu
hdd connected on top, controller conected on bottom the front doors are useless for nintendont also turn hid off on the settings while on the wiiu since the hid is automatic set up anyway on vwii.

 

[ShadowOne333]

cant use the fornt usb doors on the wiiu only the 2 back doors

its like wiiu
hdd connected on top, controller conected on bottom the front doors are useless for nintendont also turn hid off on the settings while on the wiiu since the hid is automatic set up anyway on vwii.

Then I guess I'm f*cked.
I use a Y-Cable to power up my HDD, so both back ports are being used by the HDD.
I only have the two on the front free for connecting any controller.

Bluetooth, I miss you :'(

 

[pedro702]

Then I guess I'm f*cked.
I use a Y-Cable to power up my HDD, so both back ports are being used by the HDD.
I only have the two on the front free for connecting any controller.

Bluetooth, I miss you :'(

just put something that can have a usb entrance close and turn it on like psa or the xbox you can make it work if you use your criativity.

 

[ShadowOne333]

just put something that can have a usb entrance close and turn it on like psa or the xbox you can make it work if you use your criativity.

I got nothing else to connect the HDD that is next to the Wii U.
I will search for an AC - USB Adapter of some sort just to connect the other end of the HDD.

 

[mightymuffy]

I got nothing else to connect the HDD that is next to the Wii U.
I will search for an AC - USB Adapter of some sort just to connect the other end of the HDD.

Or a usb extension cable - if the wire on your Y-cable isn't large enough, simply buy one of those and plug it into one of the front ports...

 

[epicboy]

Try using Settings Editor GUI (link in my sig) to set it to display in 480i, then test it out without anything forced.

Tried it, still doesn't show up. I get a quick flash of the menu then a blank screen.

 

[Sheimi]

I know that Paper Mario RPG used to crash on DiosMios when booting to the main screen. I don't remember what I did to make it work, I'll see if I can test it when I go to my sisters this weekend. If it works the way I think it does on DiosMios and works on Nintendon't. I'll update this post.

 

[naxil]

Trying to compile and keep getting errors.
What am I missing?

Spoiler

> "C:\Sources\Nintendont\Build.bat"
Building Nintendont Kernel (USB)
DEP usb_os.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP tiny_ehci_glue.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP string.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP vsprintf.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP main.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP NAND.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP ES.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP Config.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP diskio.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP HID.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP ff.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP EXI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP StreamADPCM.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP Patch.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP DI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP FST.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP gecko.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP alloc.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP common.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
rm -f *.elf *.o *.bin *.d *.map
DEP usb_os.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP tiny_ehci_glue.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP string.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP vsprintf.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP syscalls.d
DEP main.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP NAND.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP ES.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP utils_asm.d
DEP Config.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP diskio.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP HID.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP ff.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP EXI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP StreamADPCM.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP Patch.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP DI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP FST.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP gecko.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP alloc.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP common.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP start.d
DEP usb_os.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP tiny_ehci_glue.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP string.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP vsprintf.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP main.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP NAND.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP ES.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP Config.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP diskio.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP HID.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP ff.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP EXI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP StreamADPCM.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP Patch.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP DI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP FST.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP gecko.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP alloc.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP common.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
AS start.o
make: /bin/arm-eabi-gcc: Command not found
make: *** [start.o] Error 127
Building Nintendont Kernel (SD)
DEP SDI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP string.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP vsprintf.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP main.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP NAND.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP ES.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP Config.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP diskio.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP HID.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP ff.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP EXI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP StreamADPCM.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP Patch.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP DI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP FST.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP gecko.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP alloc.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP common.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
rm -f *.elf *.o *.bin *.d *.map
DEP SDI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP string.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP vsprintf.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP syscalls.d
DEP main.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP NAND.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP ES.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP utils_asm.d
DEP Config.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP diskio.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP HID.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP ff.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP EXI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP StreamADPCM.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP Patch.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP DI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP FST.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP gecko.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP alloc.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP common.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP start.d
DEP SDI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP string.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP vsprintf.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP main.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP NAND.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP ES.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP Config.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP diskio.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP HID.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP ff.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP EXI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP StreamADPCM.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP Patch.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP DI.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP FST.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP gecko.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP alloc.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
DEP common.d
/bin/sh: /bin/arm-eabi-gcc: No such file or directory
AS start.o
make: /bin/arm-eabi-gcc: Command not found
make: *** [start.o] Error 127
Building Nintendont Loader
clean ...
kernel.bin
bin2s -a 32 /c/Sources/Nintendont/loader/data/kernel.bin | powerpc-eabi-as -o kernel.bin.o
echo "extern const u8" `(echo kernel.bin | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`"_end[];" > `(echo kernel.bin | tr . _)`.h
echo "extern const u8" `(echo kernel.bin | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`"[];" >> `(echo kernel.bin | tr . _)`.h
echo "extern const u32" `(echo kernel.bin | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`_size";" >> `(echo kernel.bin | tr . _)`.h
kernel_usb.bin
bin2s -a 32 /c/Sources/Nintendont/loader/data/kernel_usb.bin | powerpc-eabi-as -o kernel_usb.bin.o
echo "extern const u8" `(echo kernel_usb.bin | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`"_end[];" > `(echo kernel_usb.bin | tr . _)`.h
echo "extern const u8" `(echo kernel_usb.bin | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`"[];" >> `(echo kernel_usb.bin | tr . _)`.h
echo "extern const u32" `(echo kernel_usb.bin | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`_size";" >> `(echo kernel_usb.bin | tr . _)`.h
FPad.c
Patches.c
dip.c
exi.c
font.c
global.c
loader.c
c:/Sources/Nintendont/loader/source/loader.c: In function 'LoadGame':
c:/Sources/Nintendont/loader/source/loader.c:82:12: warning: assignment makes pointer from integer without a cast [enabled by default]
c:/Sources/Nintendont/loader/source/loader.c:96:2: warning: passing argument 1 of 'app_entry' from incompatible pointer type [enabled by default]
c:/Sources/Nintendont/loader/source/loader.c:96:2: note: expected 'int (**)(const char *)' but argument is of type 'void (**)(int (*)(const char *))'
main.c
menu.c
linking ... loader.elf
output ... loader.dol
Press any key to continue . . .

The problem is the devkitARM version, if u check on TRUNK u see the right version of devkitARM, unzip it on your devkitPRO folder (backup the devkitARM previus dir), "old" devkitARM use arm-eabi name the new one (yours) use arm-none-eabi name for the exe, i am happy if i have help u with my worst english...

 

[pedro702]

is anyone actually working on nintendont? i mean i hear alot of ppl but never a codder saying im trying this now an such, so im wondering if overjoy update will be the last one.

 

[Adeka]

is anyone actually working on nintendont? i mean i hear alot of ppl but never a codder saying im trying this now an such, so im wondering if overjoy update will be the last one.

OJ and greyrogue are both working on it.

 

[naxil]

What console model do you have? I get a video signal error as well, didn't know it was the same -1 error as it won't show anything at all after i choose the game :/

faku1810? news? do u have solve the problem with -1kernel error? do u have usbgecko?

 

[Etheboss]

is anyone actually working on nintendont? i mean i hear alot of ppl but never a codder saying im trying this now an such, so im wondering if overjoy update will be the last one.

OJ and greyrogue are both working on it.

Not quite true, like OverjoY said before, he is just using a private beta for himself and has no interest on developing it any further on the main google SVN.
If he has updates to share to the public, the current devs can always ask him for the source.

 

[OverjoY]

Not quite true, like OverjoY said before, he is just using a private beta for himself and has no interest on developing it any further on the main google SVN.
If he has updates to share to the public, the current devs can always ask him for the source.

I work with private beta's in our team so changes are tested well enough before it's released or committed. I don't wanna commit all quick patches, try outs and stuff that doesn't work anyway.

OC I will share stuff the original dev team can use to make the real thing better and it's for them to decide what they gonna do with that.

I don't own a WiiU so I can't test everything myself and in our team there are only 2 people that own one. Both of them life in another time zone so the test I do with them is a really slow process

 

[faku1810]

faku1810? news? do u have solve the problem with -1kernel error? do u have usbgecko?

Unfortunately I do not have a USBgecko, otherwise I'd be glad to help more. The only progress I've got is the fact i can get to the game list (at first i got a Fat device not found error) but still when i choose a game it immediately shows a blue screen and loses signal, it doesn't even show words or anything.. I can upload my syscheck later if there's a chance my cIos are responsible at some extent.

I will try with some of the older revisions to see if i can at least Get it to show me the error code