Hardware Nintendo Switch v2, no charge with original charger, Power Circuit issue.

[Agilato]

At least i v been in v2 switch, and it has 90% of the same elements in power circuit.
And i guess it will have same issues.

 

[Skip2000]

At least i v been in v2 switch, and it has 90% of the same elements in power circuit.
And i guess it will have same issues.

Hi Agilato, do you have an idea, what could be the issue when i plug in the charger in one direction the charging symbol cames with daley and in the other direction of the cable it cames immediately. Is this also an issue from the fuse or what could be the problem .

Already changed , USB Port and M92T36

 

[Agilato]

Hi Agilato, do you have an idea, what could be the issue when i plug in the charger in one direction the charging symbol cames with daley and in the other direction of the cable it cames immediately. Is this also an issue from the fuse or what could be the problem .

Already changed , USB Port and M92T36

Need more tests, like voltage on test pin before fuse after and etc... if one side 5v other 15v might be the fuse, is it V2 switch?
Also if you didn't clean board from flux well enough it might be an issue.

 

[Skip2000]

Need more tests, like voltage on test pin before fuse after and etc... if one side 5v other 15v might be the fuse, is it V2 switch?
Also if you didn't clean board from flux well enough it might be an issue.

First thanks for your answer.
I have 15V on both sides on the fuse . My board is HAC-CPU-10 . Yesterday i have also changed the BQ12493. still same issue .
when i charge the switch for 30 min , i get an error code on screen. after removing the battery and pluging back, the switch can boot nromally.

What my finding is , fast charging only in one direction with 15V. In other direction the charging symbol cames with delay and only with 5V. Have now two switches here with same issue.

 

[Pintglass]

First thanks for your answer.
I have 15V on both sides on the fuse . My board is HAC-CPU-10 . Yesterday i have also changed the BQ12493. still same issue .
when i charge the switch for 30 min , i get an error code on screen. after removing the battery and pluging back, the switch can boot nromally.

What my finding is , fast charging only in one direction with 15V. In other direction the charging symbol cames with delay and only with 5V. Have now two switches here with same issue.

Have you got continuity from the port to both cc1 and cc2 on M92T36