Hi!!
I've done many chip installations and none have failed me. This time, after installing the chip, I connected the battery and plugged it into the Type-C port to turn it on. The chip went through its initial startup routine and everything seemed fine. I proceeded to mount the motherboard back into the console, but after connecting everything, it won't turn on. I've removed the dat0 point, tried another flex, attempted to power on without anything connected, but it still won't turn on. There's no light on the chip and the console doesn't show the OFW startup. Can anyone help me? The diode mode values are listed here:
Black ground
SP1 .20 .00
Sp2 .20 .00
A .698
RST 2.943
C .705
D .616
3.3v .803
Red ground
A .486
RST .408
C .442
D .460
3.3v .452
I'm uploading some pictures.
Thanks!!!
I've done many chip installations and none have failed me. This time, after installing the chip, I connected the battery and plugged it into the Type-C port to turn it on. The chip went through its initial startup routine and everything seemed fine. I proceeded to mount the motherboard back into the console, but after connecting everything, it won't turn on. I've removed the dat0 point, tried another flex, attempted to power on without anything connected, but it still won't turn on. There's no light on the chip and the console doesn't show the OFW startup. Can anyone help me? The diode mode values are listed here:
Black ground
SP1 .20 .00
Sp2 .20 .00
A .698
RST 2.943
C .705
D .616
3.3v .803
Red ground
A .486
RST .408
C .442
D .460
3.3v .452
I'm uploading some pictures.
Thanks!!!