Tutorial Modify ANY Wii 4.3 & below

[FIX94]

Which MIOS patcher are you using? A Link is enough.

mios patcher v0.3 modified by attila

I even tried the official v0.2 with both online/offline installation and on both the same error showed.

I never got the 0.3 or the official 0.2 to work. I don't know if the recommend cMIOS from NeoGamma also works, but you can definitely install it. Start this installer, load IOS36 and install the patched MIOS.

 

[Yuan]

Which MIOS patcher are you using? A Link is enough.

mios patcher v0.3 modified by attila

I even tried the official v0.2 with both online/offline installation and on both the same error showed.

I never got the 0.3 or the official 0.2 to work. I don't know if the recommend cMIOS from NeoGamma also works, but you can definitely install it. Start this installer, load IOS36 and install the patched MIOS.

Thanks! I will try it later. But this MIOS will change in any way my compatibility with gc original discs or other issue?

 

[FIX94]

Thanks! I will try it later. But this MIOS will change in any way my compatibility with gc original discs or other issue?

This cMIOS is basically the same than the official 0.2, it's using a new installer and MIOS 10 base, like the unofficial v0.3. So I don't think it will make a difference.

 

[Yuan]

Thanks! I will try it later. But this MIOS will change in any way my compatibility with gc original discs or other issue?
This cMIOS is basically the same than the official 0.2, it's using a new installer and MIOS 10 base, like the unofficial v0.3. So I don't think it will make a difference.


Just installed, worked flawlessly. Thanks

Just out of curiosity, if I select Install MIOS selecting no @ enable homebrew/backups it will install the clean MIOS again?

EDIT:
QUOTE(burritoboy9984 @ Aug 28 2010, 06:32 PM)

Assuming you have the files from the mod42 on the sd card, you can load up MMM and go to app manager and then launch the MIOS patcher. It will run under IOS36. I don't know if this is your problem or not, as I don't mess with anything gamecube. You could try here if you are still having issues perhaps.

-Erik

I only saw your post now, thanks for your help too!

 

[kingofgamesgx]

Ok i helped a friend mod his wii and here is his system check i just wanna make sure everything is in order (he is running 4.3U with HBC 1.0.8)

Spoiler

DOP-Mii Report
Region North America (U)
Hollywood Version 0x11

IOS Version FakeSign ES_Identify NAND Flash
250 (v20) Enabled Enabled Enabled Disabled
249 (v20) Enabled Enabled Enabled Disabled
224 (v65535) Enabled Enabled Enabled Disabled
223 (v65535) Enabled Enabled Enabled Disabled
222 (v65535) Enabled Enabled Enabled Disabled
202 (v65535) Enabled Enabled Enabled Disabled
80 (v6943) Enabled Enabled Enabled Disabled
61 (v5661) Disabled Disabled Disabled Disabled
58 (v6175) Disabled Disabled Disabled Disabled
57 (v5918) Disabled Disabled Disabled Disabled
56 (v5661) Disabled Disabled Disabled Disabled
55 (v5662) Disabled Disabled Disabled Disabled
53 (v5662) Disabled Disabled Disabled Disabled
41 (v2835) Disabled Disabled Disabled Disabled
38 (v4123) Disabled Disabled Disabled Disabled
37 (v5662) Disabled Disabled Disabled Disabled
36 (v3607) Enabled Enabled Enabled Disabled
35 (v3607) Disabled Disabled Disabled Disabled
34 (v3607) Disabled Disabled Disabled Disabled
33 (v3607) Disabled Disabled Disabled Disabled
31 (v3607) Disabled Disabled Disabled Disabled
28 (v1806) Disabled Disabled Disabled Disabled
22 (v1293) Disabled Disabled Disabled Disabled
21 (v1038) Disabled Disabled Disabled Disabled
17 (v1031) Disabled Disabled Disabled Disabled
15 (v1031) Disabled Disabled Disabled Disabled
14 (v1031) Disabled Disabled Disabled Disabled
13 (v1031) Disabled Disabled Disabled Disabled
12 (v525) Disabled Disabled Disabled Disabled
9 (v1034) Disabled Disabled Disabled Disabled

if anything looks off please do tell

 

[burritoboy9984]

looks good.

-Erik

 

[montyzoomer]

@burritoboy, The wad I tried to install has been made region free, Ive installed it on other Wiis, but never on a modded 4.2.


If a Wii was updated to 4.2 thru nintendo site and then i mod it using this guide, should i delete the official stub IOS and install the IOS from the
update to 4.2 zip file?

Or should i just leave the official stubs there?

Ill answer my own question.

MMM says its not recomended to delete the IOS stubs, (itll only save a bit of space)

The Update to 4.2 zip file doesnt even have the Stub IOS files, so i cant replace them.

I should have been using the WAD manager in MMM as it just installed the Wiiware wad without the -1029 error

thanks anyways..

 

[sylleryum]

my wii is in 4.0, if i made the update for 4.2 i will lose the save of games??? if yes how can i make backup???
and i can start this tutorial suddenly of i need have some ios on my wii??

 

[montyzoomer]

my wii is in 4.0, if i made the update for 4.2 i will lose the save of games??? if yes how can i make backup???
and i can start this tutorial suddenly of i need have some ios on my wii??

No you wont lose any save files. Just send the e-mail, download the files and follow the instructions.

 

[ibds]

Hi... I had softmodded my wii to the 4.2 menu in the past... now I followed the guide to update to 4.3..
I did every step and installed priiloader.. but when I clicked to go to system menu there was just a black screen and a text "4.2 Usa" on the right bottom...
Did I do anything wrong??

Now I'm running the nand recovery.. hope my wii works again...

Tks for any help and tks for the guide...

 

[Redmanning12]

Modify 4.3: Are you suppose to download Smashstack, or does the 43mod.zip folder already have it? and if i do, would i put it on the root of the SD card?
and do you need Hackmii installer 0.8?

 

[burritoboy9984]

Hi... I had softmodded my wii to the 4.2 menu in the past... now I followed the guide to update to 4.3..
I did every step and installed priiloader.. but when I clicked to go to system menu there was just a black screen and a text "4.2 Usa" on the right bottom...
Did I do anything wrong??

Now I'm running the nand recovery.. hope my wii works again...

Tks for any help and tks for the guide...

This guide doesn't have an option to update to 4.3. I assume you meant 4.2. But regardless, it sounds like you enabled recovery mode inside priiloader, just disable it and save.

QUOTE(Redmanning12 @ Aug 29 2010, 10:30 AM) Modify 4.3: Are you suppose to download Smashstack, or does the 43mod.zip folder already have it? and if i do, would i put it on the root of the SD card?
and do you need Hackmii installer 0.8?

Everything you need is in the 43mod.zip

-Erik

 

[burritoboy9984]

I should have been using the WAD manager in MMM as it just installed the Wiiware wad without the -1029 error

thanks anyways..

This is because MMM is based on Wad Manager 1.7 and it reloads IOS36(if you still have the mmmconfig.txt from the file packs you got). Wad Managers older than 1.7 have issues running under IOS58.

-Erik

 

[sylleryum]

Hi... I had softmodded my wii to the 4.2 menu in the past... now I followed the guide to update to 4.3..
I did every step and installed priiloader.. but when I clicked to go to system menu there was just a black screen and a text "4.2 Usa" on the right bottom...
Did I do anything wrong??

Now I'm running the nand recovery.. hope my wii works again...

Tks for any help and tks for the guide...

check the preloader options, someone on this topic said the same thing

 

[ibds]

Hi... I had softmodded my wii to the 4.2 menu in the past... now I followed the guide to update to 4.3..
I did every step and installed priiloader.. but when I clicked to go to system menu there was just a black screen and a text "4.2 Usa" on the right bottom...
Did I do anything wrong??

Now I'm running the nand recovery.. hope my wii works again...

Tks for any help and tks for the guide...

check the preloader options, someone on this topic said the same thing

I just didnt installed the priiloader and worked.. but I'll try later.
But I realized that may console already had the IOSs from the update..
Now Im installing the cIOS Installer Xr20b... I just want to update to play the new Metroid..

Obrigado pela ajuda.

 

[Redmanning12]

Hi... I had softmodded my wii to the 4.2 menu in the past... now I followed the guide to update to 4.3..
I did every step and installed priiloader.. but when I clicked to go to system menu there was just a black screen and a text "4.2 Usa" on the right bottom...
Did I do anything wrong??

Now I'm running the nand recovery.. hope my wii works again...

Tks for any help and tks for the guide...

This guide doesn't have an option to update to 4.3. I assume you meant 4.2. But regardless, it sounds like you enabled recovery mode inside priiloader, just disable it and save.

QUOTE(Redmanning12 @ Aug 29 2010, 10:30 AM) Modify 4.3: Are you suppose to download Smashstack, or does the 43mod.zip folder already have it? and if i do, would i put it on the root of the SD card?
and do you need Hackmii installer 0.8?

Everything you need is in the 43mod.zip

-Erik

well i dont have any custom stages and i put the 43mod.zip on the SD card put it in the wii went on SSBB stage builder then BANG nothing happens.........

 

[burritoboy9984]

Try creating a save file, then go into the game and delete the custom stages. Then go back to the wii menu, start it again and it should work.

-Erik

 

[ibds]

Hi... I had softmodded my wii to the 4.2 menu in the past... now I followed the guide to update to 4.3..
I did every step and installed priiloader.. but when I clicked to go to system menu there was just a black screen and a text "4.2 Usa" on the right bottom...
Did I do anything wrong??

Now I'm running the nand recovery.. hope my wii works again...

Tks for any help and tks for the guide...

This guide doesn't have an option to update to 4.3. I assume you meant 4.2. But regardless, it sounds like you enabled recovery mode inside priiloader, just disable it and save.

QUOTE(Redmanning12 @ Aug 29 2010, 10:30 AM) Modify 4.3: Are you suppose to download Smashstack, or does the 43mod.zip folder already have it? and if i do, would i put it on the root of the SD card?
and do you need Hackmii installer 0.8?

Everything you need is in the 43mod.zip

-Erik

well i dont have any custom stages and i put the 43mod.zip on the SD card put it in the wii went on SSBB stage builder then BANG nothing happens.........

I meant 4.3... but after installing I understood that the guide was for 4.2...

Now Im installing the Waninkoko firmware upgrade for v4.3..

Tks

 

[burritoboy9984]

why?

-Erik

 

[Chibicon]

The EASEUS Partition Manger 3.0 does not work on x64 bits.

Is there another program?