Hacking M3i Zero doesn´t work on my DSL

[Jonte]

I´ve just tried to install my 2 latest M3i Zero cards that I bought from DX. I´ve done this a month ago with another M3i Z and it worked without problems on my DS lite.

But now when I flash the 2 new cards and start it up in the DS it halts after choosing M3 sakura. It stops at Now Loading screen and it says M3 Sakura Ver:1.40 at the bottom at the screen.

Just a minute ago I found a new link with new firmware M3 Sakura v1.45X 5th Edition (M21) + TouchPod v4.7fX (M63). There was no F_core.dat in that zip so I used the old one for V1.4. But I still get the same problem, only difference is that it says M3 sakura Ver:1.45 at the bottom on the screen

Any ideas?

 

[neokingster]

When you are starting sakura try pressing L+R+A+B and turning off the disk check in the menu that comes up.

 

[Jonte]

Unfortunatly nothing happens. i get to the same screen as before.
I´ve even d/l SD formatter from sdcard.org and formatted the card again

 

[DeltaBurnt]

Get the new Kaura system THEN try the L+R+A+B.

If that doesn't work then you can use this other trick to stop disk check via your computer.

 

[Jonte]

I´ll look into the Kaura instead. I´ve been trying all kind of different solutions the last 2 hours trying to fix it with sakura

D/l the diskcheck file, but it didn´t work