U3 is fine after you format in FAT32. It drops back down to using class 10. I know. I'm using one right now... so... this is where I get off before it turns into a reddit fight.
Good luck.
Good luck.
You completely missed my point though. U3 cards cost more than U1 or Class 10 cards, and the speed makes no difference to the 3DS.U3 is fine after you format in FAT32. It drops back down to using class 10. I know. I'm using one right now... so... this is where I get off before it turns into a reddit fight.
Good luck.
@TCJJ Great post, but one slight correction: I don't think Boot9Strap is saved to the CTRNAND, I think it is saved to the Boot9 ROM (if that is possible, I'm not sure), which does not get touched by a System Memory Format. This is why B9S cannot be removed with a system format Because I am certain that a system format wipes all apps that are saved on CTRNAND (i.e. pre-installed apps), and then re-installs them from a recovery partition/folder. I'm not sure, but I believe the 1 GB folder I see in GodMode9, contains these recovery files.
Hmm, I knew someone was going to bring that up. Well, anyway, the exploit is called Boot9 STRAP, so if it cannot be saved to the Boot9 ROM, I imagine it is being saved to a chip or memory that is closely connected to the Boot9 ROM, but not on the CTRNAND.ROM = Read Only Memory
Sent from my iPhone using Tapatalk
Hmm, I knew someone was going to bring that up. Well, anyway, the exploit is called Boot9 STRAP, so if it cannot be saved to the Boot9 ROM, I imagine it is being saved to a chip or memory that is closely connected to the Boot9 ROM, but not on the CTRNAND.
Nope, I don't know any better than that. I tried Googling, but couldn't find any answer. There is a Powerpoint presentation that explains how Sighax/Boot9Strap works, but I'm not sure if it mentions where the exploit is saved.You win, that was the only conclusion that I could come up with is that boot9strap sort of attaches itself to a different memory region that the boot9 checks to see is good or not, but b9s exploits those checks. (Correct me if I’m wrong)
Sent from my iPhone using Tapatalk
You just need to open the cart, flip the switch, then follow the guide to installing B9S via NTRBoot. Once you have B9S and Luma3DS installed, you just need to open the cart again and flip the switch back.
You don't need a microSD in the R4i Gold Plus to use NTRBoot. You just need to flick the switch to N, make sure all the files needed for NTRBoot to work is on the root of the SD card for your 3DS, then follow through with booting into NTRBootSo I should stick the 4gb card IN the 2ds xl and the 16 gb card in the cartridge, flick the switch to NTRBoot and then attempt to boot using the magnet and start + select + X ?
edit: That is my best guess as the tutorial guide isn't precise and assumes I am not stupid, but unfortunately I am. I really don't wanna brick
Are you trying to boot the card using that?nothing seems to work. Regular boot does nothing, magnet boot does nothing. All just leads to main menu.
Are you trying to boot the card using that?
*Anyways, switch your card over to ntrboot and follow https://3ds.hacks.guide/installing-boot9strap-(ntrboot) that.
its already flashed with ntrboot tho, you switch it on, and continue with installing b9sI am trying to flash it atm with flash mode switched on my r4i gold plus. Trying the magnet boot was just out of desperation thinking maybe the instructions assume when they tell you to start your system its meant to do it that way. It says nothing about installing stuff on the 3ds's micro sd in order to flash it so I am simpling trying to flash the system with its sd card in place using the NTRBoot mode on my cartridge but its simply not displaying a menu like it said it would in the instructions :/
You do not need to flash it, you just need to flip the switch and the cart will be in NTRBoot mode.I am trying to flash it atm with flash mode switched on my r4i gold plus. Trying the magnet boot was just out of desperation thinking maybe the instructions assume when they tell you to start your system its meant to do it that way. It says nothing about installing stuff on the 3ds's micro sd in order to flash it so I am simpling trying to flash the system with its sd card in place using the NTRBoot mode on my cartridge but its simply not displaying a menu like it said it would in the instructions :/
/v/ pointed you towards reddit? Huh.I was pointed here from reddit, from which I was pointed to from /V/
/v/ pointed you towards reddit? Huh.
More importantly, why are you going to 4chan for help?