Hardware Hey guys, I did a thing! :D (SD Card slot cut out on N3DS XL)

Status
Not open for further replies.
Aether Lion

Aether Lion

GBATemp's Pet Lion
OP
Member
Level 4
Joined
May 1, 2016
Messages
418
Trophies
0
Age
27
Location
Penisylvania
XP
431
Country
United States
WIN_20160521_07_39_57_Pro.jpg

I left my phone at a friend's house and my DSLR Camera's Battery Charger replacement ain't coming for a week or so. Deal with the image quality. xD

I don't know if something better than this exists (probably anything is better). BUT, I just took a Dremel tool and cut out the microSD card slot (it is perfectly cut around the N3DS logo on the bottom ;) ). I'm used to my O3DS's SD slot that was easy to remove...well now this is even easier. I tested it and it doesn't get in the way of gameplay + is super easy to operate. I did a lil bit of a sloppy job but made sure to smooth it out so no one cuts themselves off of the edges. :P

I don't do DIY much so I thought I'd come up with something and just do it. :P I wanted to replace the bottom plate and they are cheap anyways so if I messed up it was no big deal. I'm already liking it.I usually have a case on this so it protects it from internal dust or anything. I just like only having to take off the case instead of both layers.
So yay! No more opening the back to get the microSD card out.

The whole process took me like...what? 3 - 5 minutes?



Here are very broad and shitty instructions: [If you get hurt, it's on you. If your device somehow explodes or something, it's on you.]
  1. REMOVE THE BOTTOM PLATE FROM THE 3DS. YOU ONLY NEED TO USE THIS PIECE. DON'T DO THIS WHILE IT IS ATTACHED TO YOUR DEVICE. :ha:
  2. Get an outline of the microSD card slot drawn on the back of the bottom piece (I found a tiny outline of extra wear/gunk where the microSD card slot laid on the bottom piece so I used that as the outline.)
  3. DREMEL TOOL TIME! Take it slow though, you aren't in a rush, are you? If you are. Don't do this. Try to cut out the "common rectangle". What I mean is; You see how the microSD slot is comprised of a rectangle and two half circles? Cut out that rectangle and then sand the sides down to get the half circles.
  4. Make sure to smooth the edges and flatten out any distorted surfaces.
  5. Profit. B-)
  6. Seriously, you're done. :toot:
A hint of caution if you do this: Be sure to smooth the sides/top of where you cut/sand, not only to prevent self-harm but to also remove the warped plastic on the outside that was caused from cutting into the back.

If you do it, post pics! :yay3ds:

Anyways, it is 8AM and I haven't slept so I will probably regret this when I wake up. I think I'mma try to sleep, I dunno. :3
 
  • Like
Reactions: NekoMichi, LuigiXL and nintendo3dsxlfan
Scarlet

Scarlet

Onion Soup
Editorial Team
GBAtemp Patron
Level 24
Joined
Jan 7, 2015
Messages
5,164
Trophies
2
Location
Middleish North-Right
Website
scarlet.works
XP
14,871
Country
United Kingdom
Aether Lion said:
I've had no sleep.:hateit:
Plus, I haven't touched a Dremel in like 9 months. Cut me some slack! :sad:
Click to expand...
At least you can order a replacement battery cover from Nintendo US, we don't get that option in the UK </3
 
  • Like
Reactions: LuigiXL
hobbledehoy899

hobbledehoy899

Well-Known Member
Member
Level 10
Joined
Nov 13, 2015
Messages
2,874
Trophies
1
XP
2,192
Country
Antarctica
All you needed to do was remove the screws, now the slot susceptible to dust, liquid spills, and other shit (people sneakily coming up and removing the Micro SD-Card during game-play.)
 
Aether Lion

Aether Lion

GBATemp's Pet Lion
OP
Member
Level 4
Joined
May 1, 2016
Messages
418
Trophies
0
Age
27
Location
Penisylvania
XP
431
Country
United States
Sicklyboy said:
The Nintendo panda dev-units actually have an official backplate with the microSD cutout on it for easy access.
Click to expand...
Hey my option shows hard work and dedication, though! :mthr:

ScarletKohaku said:
At least you can order a replacement battery cover from Nintendo US, we don't get that option in the UK </3
Click to expand...
And also, they call it eBae for a reason.

hobbledehoy899 said:
All you needed to do was remove the screws, now the slot susceptible to dust, liquid spills, and other shit (people sneakily coming up and removing the Micro SD-Card during game-play.)
Click to expand...
Aether Lion said:
View attachment 50146
I usually have a case on this so it protects it from internal dust or anything. I just like only having to take off the case instead of both layers.
Click to expand...
And besides, having my SD card in there is just as good as having a dummy one in there to prevent dust. I only have my SD card out for UP TO an hour at a time. There isn't a big gap from the battery cover and the actual bottom of the device, so if it is able to get through that, it'd be able to get through the back of the device since the screws were stripped as is.

mightymuffy said:
There's a fine line between genius and psychotic, and I'm not sure which side of the line this comes under :lol:
Does the job though, but be careful for dust n stuff....
Click to expand...
I'm actually both so it's okay. :P
 
  • Like
Reactions: mightymuffy
dimmidice

dimmidice

Well-Known Member
Member
Level 12
Joined
Sep 12, 2009
Messages
2,359
Trophies
2
XP
3,005
Country
Belgium
i'd have tried to fashion a hinge with something. perhaps even just duct tape. or just remove the screw so its more easily removeable.
 
Aether Lion

Aether Lion

GBATemp's Pet Lion
OP
Member
Level 4
Joined
May 1, 2016
Messages
418
Trophies
0
Age
27
Location
Penisylvania
XP
431
Country
United States
dimmidice said:
i'd have tried to fashion a hinge with something. perhaps even just duct tape. or just remove the screw so its more easily removeable.
Click to expand...
I was trying to do a hinge but nothing I could think of would work, and besides, the point is to have direct access to the SD card. Also, I can say that I'm still really liking this and it's been a couple hours since. The SD card comes out and goes in so perfectly. It's somehow easier to take it out like this than with the cover entirely popped off. :P
----------------
@Sicklyboy Do you have a link to the cover you're talking about? I'm either going to scoff at how much money I saved or order it when I wake up and realize how awful this all was. xD
----------------
hobbledehoy899 said:
I'd have too much fun replacing other people's SD-Cards with dummy/really small (256MBs or less) ones.
Click to expand...
Yoooo this sounds like some YouTube-worthy-prankage. :P I'm down.
First up, I'mma confuse the shit out of my mom because she isn't tech savvy but has a phone and tablet. :P
 
Last edited by Aether Lion,
Aether Lion

Aether Lion

GBATemp's Pet Lion
OP
Member
Level 4
Joined
May 1, 2016
Messages
418
Trophies
0
Age
27
Location
Penisylvania
XP
431
Country
United States
VinsCool said:
I simply left the screws unscrewed, so I can remove my backplate anytime.
Click to expand...
Well the one screw was broken off when I got this. Then the other one just broke off.
I was just like FUUUUUCK THIIIISSSS and assaulted it with a Dremel. Thankfully the back panel of my 3DS didn't push charges. ( ͡° ͜ʖ ͡°)
 
Status
Not open for further replies.

Site & Scene News

Go to forum More news

Popular threads in this forum

Hacking Homebrew  A new way to experience StreetPass

Is it possible...?

Hacking Hardware  New Nintendo 3DS XL Louvre

Emulation  i have citra, i have my aes keys installed, how do i get the home menu

Hardware  Why does my 3DS take so long to turn off?

Translation Project  DQM2SP translation

Hacking Misc  VCRUNTIME140.dll UCRTBASED.dll Master Thread

What's the best 3DS emulator (especially after Citra's shutdown)?

General chit-chat
Help Users
  • No one is chatting at the moment.
  • K3Nv2 @ K3Nv2:
    How do you know if the night will be good when you're asleep
  • BakerMan @ BakerMan:
    because i didn't say i was asleep
  • BakerMan @ BakerMan:
    i said i was sleeping...
  • BakerMan @ BakerMan:
    sleeping with uremum
  • K3Nv2 @ K3Nv2:
    Even my mum slept on that uremum
  • TwoSpikedHands @ TwoSpikedHands:
    yall im torn... ive been hacking away at tales of phantasia GBA (the USA version) and have so many documents of reverse engineering i've done
  • TwoSpikedHands @ TwoSpikedHands:
    I just found out that the EU version is better in literally every way, better sound quality, better lighting, and there's even a patch someone made to make the text look nicer
  • TwoSpikedHands @ TwoSpikedHands:
    Do I restart now using what i've learned on the EU version since it's a better overall experience? or do I continue with the US version since that is what ive been using, and if someone decides to play my hack, it would most likely be that version?
  • Sicklyboy @ Sicklyboy:
    @TwoSpikedHands, I'll preface this with the fact that I know nothing about the game, but, I think it depends on what your goals are. Are you trying to make a definitive version of the game? You may want to refocus your efforts on the EU version then. Or, are you trying to make a better US version? In which case, the only way to make a better US version is to keep on plugging away at that one ;)
  • Sicklyboy @ Sicklyboy:
    I'm not familiar with the technicalities of the differences between the two versions, but I'm wondering if at least some of those differences are things that you could port over to the US version in your patch without having to include copyrighted assets from the EU version
  • TwoSpikedHands @ TwoSpikedHands:
    @Sicklyboy I am wanting to fully change the game and bend it to my will lol. I would like to eventually have the ability to add more characters, enemies, even have a completely different story if i wanted. I already have the ability to change the tilemaps in the US version, so I can basically make my own map and warp to it in game - so I'm pretty far into it!
  • TwoSpikedHands @ TwoSpikedHands:
    I really would like to make a hack that I would enjoy playing, and maybe other people would too. swapping to the EU version would also mean my US friends could not legally play it
  • TwoSpikedHands @ TwoSpikedHands:
    I am definitely considering porting over some of the EU features without using the actual ROM itself, tbh that would probably be the best way to go about it... but i'm sad that the voice acting is so.... not good on the US version. May not be a way around that though
  • TwoSpikedHands @ TwoSpikedHands:
    I appreciate the insight!
  • The Real Jdbye @ The Real Jdbye:
    @TwoSpikedHands just switch, all the knowledge you learned still applies and most of the code and assets should be the same anyway
  • The Real Jdbye @ The Real Jdbye:
    and realistically they wouldn't

    be able to play it legally anyway since they need a ROM and they probably don't have the means to dump it themselves
  • The Real Jdbye @ The Real Jdbye:
    why the shit does the shitbox randomly insert newlines in my messages
  • Veho @ Veho:
    It does that when I edit a post.
  • Veho @ Veho:
    It inserts a newline in a random spot.
  • The Real Jdbye @ The Real Jdbye:
    never had that i don't think
  • Karma177 @ Karma177:
    do y'all think having an sd card that has a write speed of 700kb/s is a bad idea?
    trying to restore emunand rn but it's taking ages... (also when I finished the first time hekate decided to delete all my fucking files :wacko:)
  • The Real Jdbye @ The Real Jdbye:
    @Karma177 that sd card is 100% faulty so yes, its a bad idea
  • The Real Jdbye @ The Real Jdbye:
    even the slowest non-sdhc sd cards are a few MB/s
  • Psionic Roshambo @ Psionic Roshambo:
    https://www.youtube.com/watch?v=SjCivnt5t50
  • Karma177 @ Karma177:
    @The Real Jdbye it hasn't given me any error trying to write things on it so I don't really think it's faulty (pasted 40/50gb+ folders and no write errors)
    Karma177 @ Karma177: @The Real Jdbye it hasn't given me any error trying to write things on it so I don't really...