Thanks you so muchmauifrog said:Change RSBP -> 0SBE
I wanna kiss you mauifrogMany many thanks
QUOTE(Hells Guardian @ Mar 24 2011, 08:55 AM) ok so this is working finally huh? awsome.
Thanks you so muchmauifrog said:Change RSBP -> 0SBE
I wanna kiss you mauifrogMany many thanks
QUOTE(Hells Guardian @ Mar 24 2011, 08:55 AM) ok so this is working finally huh? awsome.
Norge said:I'm at wits end with these piece of s...t.....
- 4.2U
- error003
- No wod or key (is this required??)
- GameCube controller to get to rescue menu
I've tried all options but nothing works.
1) MarioKart PWNS
- Loading MarioKart fine....but will not install channel. Goes blank when selecting "Install Channel"...i.e. never get to the disc swapping part.
2) Sonic Black Knight - Disc Swap
- Game loads to title screen
- Press home and insert ssbb-pal, second disc just clicks and never spins up
3) Carnival Games - Disc Swap
- Game loads to title screen
- Press home and insert ssbb-pal, second disc just clicks, clicks and never spins...if hitting reset just after swapping disc the returned to 003 error screen
....not a happy camper!
Any clues or suggestions would be most welcome.
PS! When running Swap-Disc-PWNS.bat, is it normal for the dos window to flash briefly and then disappear...i.e. is that is for the .bat file. In other words, both iso are ready for burning at that point??
Please help...
S
Goodfox said:Hi,
Wii is 4.2(USA) - (Mario Kart PWNS)
After using PAL SSBB disk I successfully reach following step:
".....Go to the stage builder, delete any custom stages, go back to the main title screen
Insert a standard sd card, 1-2g, non sdhc with Smash Stack PAL on it"
but after deleting all saved stages in the builder and inserting SD, the system stuck at this point
means nothing happened, no buttons working and in order to release need to power off the box.
looks that problem is related with the SD:
1. This is 1GB SD formatted with FAT
2. After that following directories where created:
/private/wii/app/0SBE/st
3. inside of "st" directory I put file: st_smashStackPK_noSave.bin
4. inside of the root I put "boot.elf" file (from hackmii_installer_v0.8.zip)
what is wrong?
thanks.
You have a region mis-match semi brick. You can do one of two things, install the system ios and menu matching your region settings or change your region settings to match your installed system menu. You can run any region changer to view/fix the settings.Goodfox said:thanks a lot , it is working now
Just one small problem Wii setting menu is not available -> there is a error something about wrong url and opera settings etc...
Goodfox said:Please correct me if it wrong..
1. The Serial number started with LU (means USA)
2. Wii was presented with 4.2(USA)
According to above for the Chapter 2 was used:
USA-ModPack-NTSC-U (with CIOS-PACK.zip of course), because the goal was only to repair and not to change the region and upgrade), and in the end the Priiloader was installed with recommended settings in order to brick protection.
if the current status - "region mis-match semi brick" it means that some conditions are not right.
btw for me the PAL is looks more preferably
So could you clarify please what steps need to do to fix it?
"...install the system ios and menu matching your region settings":
a) Need to repeat "Part 1- Wad Installs" but in this case just use - EURO-ModPack-PAL-E.zip?
b) Need to perform "Part 2- Optional Region Change" too?
c) should be Priiloader (brick protection) setting be disabled prior performing the above steps?
thanks a lot.
stingray1059 said:i have a error 003 wii, its a 4.2k which was updated recently via internet.
i dont think it has a modchip.
can a backup copy of mariokart will work?