Separate names with a comma.
Discussion in 'GBA - Flashing Hardware and Software' started by Ocarey1327, Apr 16, 2018.
My omega arrived today and like the reform it doesn't fit in my DS lite has anyone got a fix?
Mine came with a couple of shell segments, one of the traditional size GBA slot and another for the DS lite dust cover size. Did yours not?
Yes but it wont fit in the ds lite in either shell
I think his issue is the insertion force. The EZ-Flash Reform required a lot of force to get it into the cartridge Slot of the GBA and DS. My guess is, OP has the same problem with the Omega.
While the omega still requires more "force" to get it in than a regular card, it's noticably better than the reform for me.
@Ocarey1327 maybe this works for the omega as well:
I saw this thread but i dont understand what he made smaller?
He trimmed the plastic around the screw hole.
Behold my paint powerpoint skillz (not to scale):
when looking sideways onto the shell you'll see this standoff. The red part goes through the hole in the PCB and the board itself rests on the green part. For the reform, I cut away from the green part so the PCB sits lower in the card.
Its kinda crap that a company so well entrenched with the GBA/DS market would make a cart that doesn't fit, even with adjustment shells.
Thats helpful but now my board sits on angle after cutting away the top part of the standoff
did you cut off the part I marked red?!
No just the green part in order to make the top part longer
This did aleviate the insertion force issue for me on the EZ-Flash Reform. What angle does your board have now? is it angled backwards/forwards or left/right?
It would be much easier if i could take a picture but the camera on my phone is not working. ill try my best to explain.
look at the cart so your looking where the pins are the board is angled like this
The right side of the cart is where it usually is a little high and the other is lower heres a diagram i hope this is understandable... The box on the image is the cart the other smaller line is the cart and the angle it is on
hard to say what else you could try, sorry
here is the picture http://www.ezflash.cn/omegacase.jpg
one of our dealer mixed the reform case into omega package by mistaken, if you got an omega with a lite case looks like the upper one in the picture, please contact the dealer(no matter which one, if the package was sent from Hong Kong or China,they are clones of the mistaken dealer) for a correct omega replacement case for free. Yes, free charge and free shipping.
Okay great! I purchased from Axiogame will they send me out the replacement lite shell?
Yes,contact them and ask a replacement case. attach your case picture if possible, they'll know what to do.
That's interesting to know. Gonna check mine later when I am at home.
Also: how can your card already have been cloned? Are cloners already this fast? Is there some way to recognize these clones?
I mean the dealers are clone, they are indeed one.
Ah i see. I just checked my shell and I, indeed, received a wrong DS-Lite front plate thingy. Contacted my dealer, hope they'll be able to send me the new shell.
Thanks for the heads up.