Congrats. Now add a battery holder mod and pico psu
Thank you for the motivation,but thanks NO.
Congrats. Now add a battery holder mod and pico psu
That is the correct answer. I kept the original power supply too but I did add a extra 12V fan to replace the load of the gdrom drive.Thank you for the motivation,but thanks NO.
I try to take care of cooling the Dreamcast.And making breaks.That is the correct answer. I kept the original power supply too but I did add a extra 12V fan to replace the load of the gdrom drive.
Guys can someone recap me the use of GDEmu and what I need? I read about PSU Mod, 3D printed parts. A lot of things. So I need some clarification thanks
Inviato dal mio MIX 2S utilizzando Tapatalk
Yeah, my DC is VA1, already checked.Hello.
The most important Thing is your Deamcast is a MODELL VA1:
View attachment 172794 View attachment 172795
Thats all.
The plastic parts from a 3D printer is recommended of the Airflow (the GD Rom fills the hole space).
https://www.thingiverse.com/thing:1585333
The PSU and Fan Mod is your choice.It is not compellingly necessary.But also remommended.
https://www.retrorgb.com/updated-dreamcast-noctua-fan-mod-design.html
https://www.retrosales.com.au/produ...ast-replacement-modified-psu-retrofit-modding
And a SD CARD.Note: the bigger the Card the longer maybe the load times.
64 - 128 GB should be enough.
Thank you.
No.Yeah, my DC is VA1, already checked.
Are you the developer of GDEmu?
Inviato dal mio MIX 2S utilizzando Tapatalk
Yeah, I know that most of the time is out of stock. So i was thinking about china oneNo.
Here is the source:
https://gdemu.wordpress.com/about/
But unfortunately it is expensive and the order "windows" are pretty short.
So the Clones from China are an alternative like "some" Flashcards for Nintendo DSi + Co.
Hello.You don't need 3d printed parts for airflow. You can just cut out a piece of plastic and tape it over the opening that is left now by having no disc drive
Actual the price is very good for this one:
https://www.aliexpress.com/item/Opt...048.html?spm=a2g0s.9042311.0.0.43034c4d80axTc
ONLY 2 days LEFT !!
49 Euro or 54 $ includes shipping.
No need to update,there is no newer one (since 2017 I think).Interesting, the only concern I have is the inability to update the firmware.
No need to update,there is no newer one (since 2017 I think).
https://gbatemp.net/threads/can-the...u-5-15b-clone-be-updated.542892/#post-8708704According to the created date, 25th may 2018. But the change log says it’s nothing significant besides maybe long file name support.
And a SD CARD.Note: the bigger the Card the longer maybe the load times.
Since I installed and tested (max. 1 hour) it I do not play with the Dreamcast.
I turned it on a few Minutes ago and I feared the worst......
After Time and Date comes NO GD Menu.
I opened the Lid and see a nice RED LED constantly shining.
You should use the following tool to create the GDMenu layout, it will load the menu instantly even on a massive SD card with hundreds of games:
http://sheep.host22.com/GDEMU_SD.rar
Try wiggling around the GDEMU a bit. I had similar issues and thought mine was broken, but it turns out the connection is just finicky. It's extremely unlikely that there's actually something wrong with the GDEMU, especially if it worked before as you wrote.