Hacking Downgrade for System Menu 4.0

Status
Not open for further replies.
Davi92 said:

10) Exit again, and run IOSDowngraderv1 from HBC.
11) If you want a System Menu lower than 4.0, use cIOS Downgrader
wink.gif


Thanks to comex for DVDX 3.4 and BannerBomb, to WiiPower for providing a version of the WAD Manager source compatible with the latest devkitPro and libogc and to WB3000 for NUS Downloader.


I have a Wii version 4.0e
i want to downgrade my Wii to 3.2 to install the Homebrew Channel.

downloaded Bannerbomb and get to step 10 there is open Cios downgrader and select firmware 3.2e
it strats downloading but sttucks by #15
does this take some time todownload or does someone knowwhat i can do ?

Tnx
 
Frank2k said:
it strats downloading but sttucks by #15
does this take some time todownload or does someone knowwhat i can do ?

Tnx

Remove any gamecube memory/gamepads from Wii (if you have any connected).
 
shasta588 said:
can someone write a full tutorial for doing this using bannerbomb?

yes please, I second the request. Can someone create a tutorial for downgrading/hacking virgin 4.0u using bannerbomb.
 
PNo4 said:
Frank2k said:
it strats downloading but sttucks by #15
does this take some time todownload or does someone knowwhat i can do ?

Tnx

Remove any gamecube memory/gamepads from Wii (if you have any connected).

done:D

but it struck a couple of steps furthe :S
 
Please help me ASAP! My wii is SCREWED if I don't fix it!
After following this tutorial, I used the ios doengrader (last step) and when I rebooted, the wii's screen was screwed up!
restarted, nothing
cold shutdown, nothing, still messed up
I can't play games like this! And I doubt that nintendo will replace it!
please help ASAP, or I'm out 250 dollars
 
Pengytheduckwin said:
Please help me ASAP! My wii is SCREWED if I don't fix it!
After following this tutorial, I used the ios doengrader (last step) and when I rebooted, the wii's screen was screwed up!
restarted, nothing
cold shutdown, nothing, still messed up
I can't play games like this! And I doubt that nintendo will replace it!
please help ASAP, or I'm out 250 dollars

This is why you read the guide many times, knowing it by heart, before you attempt anything.

Check your Wii's serial number, if it starts with LU64, LU65 that is most likely the reason why your Wii is dead, its "unhackable" the normal way, trying will just BRICK it.
 
PNo4 said:
Pengytheduckwin said:
Please help me ASAP! My wii is SCREWED if I don't fix it!
After following this tutorial, I used the ios doengrader (last step) and when I rebooted, the wii's screen was screwed up!
restarted, nothing
cold shutdown, nothing, still messed up
I can't play games like this! And I doubt that nintendo will replace it!
please help ASAP, or I'm out 250 dollars

This is why you read the guide many times, knowing it by heart, before you attempt anything.

Check your Wii's serial number, if it starts with LU64, LU65 that is most likely the reason why your Wii is dead, its "unhackable" the normal way, trying will just BRICK it.

Sorry for the overreaction, but I've fixed the problem, I accidentaly chose E, thinking it stood for english, and didn't see the U firmware. I hooked up my wii to my laptop set on PAL mode and fixed it there.
And no, my wii didn't have LU64 or LU65, that was the first thing I checked.
 
Just curious, how do you "install" 3.2? I have done everything, including 6. I have installed IOS30, as well as all the ones before it, and after, up to 35. I looked through the dols you gave me, and I seem to have run out of options. All that's left is NandClean.dol and wadmanager. Any help?
 
bleach098 said:
Just curious, how do you "install" 3.2? I have done everything, including 6. I have installed IOS30, as well as all the ones before it, and after, up to 35. I looked through the dols you gave me, and I seem to have run out of options. All that's left is NandClean.dol and wadmanager. Any help?

Just a quick bump before I sleep. I would like to get this done tomorrow. Thanks in advance!
 
Well i got a wii back from ninty today and it appears to be a unmoddable version. The thing is my other wii was serial LAH112xxx and the new one was LAH113xxx so i dint really even think it would be an unmoddable. So i got hbc installed, but couldnt get a cIOS installed, since I didnt think about LU64 I went ahead and downgraded an IOS with trucha bug to get cios installed. After that all i get with homebrew is a black screen, also black screen with Banner Bomb.

So I went to 4.0 thinking it would clear up the IOS downgrade problem, but still just black screen on homebrew booting.
 
bleach098 said:
bleach098 said:
Just curious, how do you "install" 3.2? I have done everything, including 6. I have installed IOS30, as well as all the ones before it, and after, up to 35. I looked through the dols you gave me, and I seem to have run out of options. All that's left is NandClean.dol and wadmanager. Any help?

Just a quick bump before I sleep. I would like to get this done tomorrow. Thanks in advance!
Install all the IOSes, you'll need them
wink.gif

System Menus are the last options (after IOSes and system channels). You can choose 3.2 or 4.0.
wink2.gif
 
Davi92 said:
bleach098 said:
bleach098 said:
Just curious, how do you "install" 3.2? I have done everything, including 6. I have installed IOS30, as well as all the ones before it, and after, up to 35. I looked through the dols you gave me, and I seem to have run out of options. All that's left is NandClean.dol and wadmanager. Any help?

Just a quick bump before I sleep. I would like to get this done tomorrow. Thanks in advance!
Install all the IOSes, you'll need them
wink.gif

System Menus are the last options (after IOSes and system channels). You can choose 3.2 or 4.0.
wink2.gif

Boy do I feel dumb... But thanks a bunch for helping a newbie! Especially since it was a really dumb question.
But... It's working now! I'm 3.2U!
Internet_High_Five.jpg


Thanks a bunch.
 
hey there, when it Install IOS11 v10

it starts downloading and install

content 1/2 done!

content 2/2 done!
DOWNLOAD COMPLETE!

Istalling to title bla bla bal

failed: 1017

something failed sorry.

press any key to quit.

What are iam doing wrong? Please anyone?
 
Groomery said:
hey there, when it Install IOS11 v10

it starts downloading and install

content 1/2 done!

content 2/2 done!
DOWNLOAD COMPLETE!

Istalling to title bla bla bal

failed: 1017

something failed sorry.

press any key to quit.

What are iam doing wrong? Please anyone?

I got the same thing, but I'm gonna revise the above:

Do you want to install IOS11 v10?

Press 'A' to Confirm - Press any other button to Deny...
Downloading Title 00000001-0000000b v10.....
TMD..Done
Ticket..Done
Content 1/2 ID: 00000008...Done
Content 2/2 ID: 00000009...Done
Download complete. Installing to Title 00000001-0000000b v10...
1...\:
ES_AddContentStart(000000010000000b, 0) failed: -1017

install returned -1
Installation complete!
Something failed. Sorry.
Press any key to quit.

And this is with the newer version of the Downgrade for System Menu 4.0.
 
[BnC said:
Mitchell]
Groomery said:
hey there, when it Install IOS11 v10

it starts downloading and install

content 1/2 done!

content 2/2 done!
DOWNLOAD COMPLETE!

Istalling to title bla bla bal

failed: 1017

something failed sorry.

press any key to quit.

What are iam doing wrong? Please anyone?

I got the same thing, but I'm gonna revise the above:

Do you want to install IOS11 v10?

Press 'A' to Confirm - Press any other button to Deny...
Downloading Title 00000001-0000000b v10.....
TMD..Done
Ticket..Done
Content 1/2 ID: 00000008...Done
Content 2/2 ID: 00000009...Done
Download complete. Installing to Title 00000001-0000000b v10...
1...\:
ES_AddContentStart(000000010000000b, 0) failed: -1017

install returned -1
Installation complete!
Something failed. Sorry.
Press any key to quit.

And this is with the newer version of the Downgrade for System Menu 4.0.

YES. THIS. I'm having the same issue exactly! Please help!
 
Status
Not open for further replies.

Site & Scene News

Popular threads in this forum