Hi all,
After reading through hours worth of guides I've finally got things working OK on my Wii. I've got a Wii black 4.2 and have successfully managed to backup my games.
I used this guide for Bannerbomb, HBC & Bootmii.
http://sites.google.com/site/completesg/ha...uide/the-basics
Software versions as follows;
HackMii Installer v0.6
Bannerbomb abd6a_v200.zip
Result was a working homebrew channel. I didn't install DVDx.
I then followed this guide;
http://sites.google.com/site/completesg/hacking-guide/trucha
Software
DOP-Mii v12
All options were "Download IOS from NUS"
All instructions followed to the letter and I did "Removing Stub IOSs"
Next I formatted a WD My passport 500gig drive leaving 3.6gig as FAT32 marked as "active" and the other unformatted but assigned a letter and "active" using disk management in Win 7.
I then formatted the other partition to WBFS using WBFS manager 3.0 successfully.
I then used this guide http://usbloadergx.koureio.net/help/readmii
I installed the cIOS Installer Xr19 using IOS36 and IOS57-64-v5661.wad -> Works best with newer games
I then installed the USB Loader GX version 1.0 r866 which works perfectly from HBC.
However when loading:
Reloading into ios 236
IOS 236 not found. Reloading into 36
Starting up
Initializing controllers
Initialize USB (wake up
Reloading 249...0
init wbfs...0
etc the rest is too fast to see
And the program loads perfectly, finds 466GB USB hard drive and functions normally. I can back my disks up and play them from the USB drive.
My problems arise when I try to install a pre loader.
I'm using WAD manager 1.6
Using SD:/apps/usbloader_gx/r929.dol
I have both a forwarder and a Channel of which the Channel installs but the forwarder won't.
Channel is USB Loader GX-ULNR-r649.wad. I've also tried R929.Wad from http://code.google.com/p/usbloader-gui/dow...e+DownloadCount
forwarder is USB_Loader_GX-UNEO_Forwarder_16.06.09.rar
When trying to install R929.WAD using WAD Manager I end up getting the following error;
Opening OK!
Installing Title.....ERROR! (ret = -1029)
Exact same error when trying to install USB_Loader_GX-UNEO_Forwarder.wad
When installing the USB Loader GX-ULNR-r649.wad I get;
Finished Installation...OK!
So that install fine. I press home to restart Wii exit to home menu and there is the channel "USB Loader GX."
I hit start and get "No USB Device Found. Do u want to retry for 30 secs?"
Options are "clOS249" and "clOS222"
Pressing clOS249 has the Wii wait 30 secs but still can't find a USB Device.
Pressing "clOS222" causes the options to dissappear up the screen leaving me with a background and nothing further happens.
I have also tried the other USB port but have it as in this guide http://adewii.wordpress.com/2009/10/17/how...d-or-usb-drive/
No luck!
I reset the Wii and go back to the HBC, load USB Loader GX, and everything works fine!
What's going on?
Cheers
Homer
After reading through hours worth of guides I've finally got things working OK on my Wii. I've got a Wii black 4.2 and have successfully managed to backup my games.
I used this guide for Bannerbomb, HBC & Bootmii.
http://sites.google.com/site/completesg/ha...uide/the-basics
Software versions as follows;
HackMii Installer v0.6
Bannerbomb abd6a_v200.zip
Result was a working homebrew channel. I didn't install DVDx.
I then followed this guide;
http://sites.google.com/site/completesg/hacking-guide/trucha
Software
DOP-Mii v12
All options were "Download IOS from NUS"
All instructions followed to the letter and I did "Removing Stub IOSs"
Next I formatted a WD My passport 500gig drive leaving 3.6gig as FAT32 marked as "active" and the other unformatted but assigned a letter and "active" using disk management in Win 7.
I then formatted the other partition to WBFS using WBFS manager 3.0 successfully.
I then used this guide http://usbloadergx.koureio.net/help/readmii
I installed the cIOS Installer Xr19 using IOS36 and IOS57-64-v5661.wad -> Works best with newer games
I then installed the USB Loader GX version 1.0 r866 which works perfectly from HBC.
However when loading:
Reloading into ios 236
IOS 236 not found. Reloading into 36
Starting up
Initializing controllers
Initialize USB (wake up
Reloading 249...0
init wbfs...0
etc the rest is too fast to see
And the program loads perfectly, finds 466GB USB hard drive and functions normally. I can back my disks up and play them from the USB drive.
My problems arise when I try to install a pre loader.
I'm using WAD manager 1.6
Using SD:/apps/usbloader_gx/r929.dol
I have both a forwarder and a Channel of which the Channel installs but the forwarder won't.
Channel is USB Loader GX-ULNR-r649.wad. I've also tried R929.Wad from http://code.google.com/p/usbloader-gui/dow...e+DownloadCount
forwarder is USB_Loader_GX-UNEO_Forwarder_16.06.09.rar
When trying to install R929.WAD using WAD Manager I end up getting the following error;
Opening OK!
Installing Title.....ERROR! (ret = -1029)
Exact same error when trying to install USB_Loader_GX-UNEO_Forwarder.wad
When installing the USB Loader GX-ULNR-r649.wad I get;
Finished Installation...OK!
So that install fine. I press home to restart Wii exit to home menu and there is the channel "USB Loader GX."
I hit start and get "No USB Device Found. Do u want to retry for 30 secs?"
Options are "clOS249" and "clOS222"
Pressing clOS249 has the Wii wait 30 secs but still can't find a USB Device.
Pressing "clOS222" causes the options to dissappear up the screen leaving me with a background and nothing further happens.
I have also tried the other USB port but have it as in this guide http://adewii.wordpress.com/2009/10/17/how...d-or-usb-drive/
No luck!
I reset the Wii and go back to the HBC, load USB Loader GX, and everything works fine!
What's going on?
Cheers
Homer