Homebrew Can I get Homebrew/Cfw without a flashcart?

[Owenge]

I'm looking for a way to put homebrew/cfw on my Dsi. I'm new to the Nds scene and need help.....

I know about HiyaCFW and RocketLauncher but it seems they are not out yet.

when they do come out, how do I load it to the NTR retail cart. Homebrew?

Sorry if im a noob

 

[CatmanFan]

What system version number are you in?
You can check in System Settings.

You can already use DSiWare exploits with Sudoku, 4 Swords and Exidia if you have any of them already. Make sure that your system is NOT on 1.4.2 or above, because these versions block copying exploits to the system memory.

 

[siamese]

what is your system version? higher than 1.4 will require a downgrade, lower than 1.4? upgrade to 1.45 and downgrade, 1.4? good, but you still need an entry point, so keep reading. Carefully follow this guide if you dont have flipnote studio preinstalled

http://gbatemp.net/threads/dsi-downgrading-the-complete-guide.393682/

HARDMOD is a must with this guide, You must be comfortable soldering to pads that are as small as 0.5mm in diameter.

if you have flipnote studio preinstalled on your DSi. Look for ugopwn, mighty GOOGLE will help, and carefully follow the instuctions on this post

http://gbatemp.net/threads/ugopwn-usa-flipnote-studio-dsi-sploit.479353/ safety increases using this:

http://gbatemp.net/threads/hiyacfw-discussion.478848/page-44#post-7509380

Dump your nand_dsi.bin. Carefully follow this guide

http://gbatemp.net/threads/gbatemp-dsi-modding-help-thread-and-guide.481118

Testing your modded nand with no$gba is a MUST! do not inject modded nands without testing them first.

Want to install some of your DSiWare Backups? Carefully follow this guide:

http://gbatemp.net/threads/photo-gu...backups-on-real-hardware-and-emulator.476817/.

It´s all here in GBATEMP, reading and understanding the guides is basic, even the noobest noob (that would be me ) can get away with it.

Wait, what about RocketLauncher and HiyaCFW? they will be ready when they are ready (if ever) dont bother the devs with release dates .

homebrew? go https://dsiguide.me/homebrew-downloads

 

[CatmanFan]

what is your system version? higher than 1.4 will require a downgrade, lower than 1.4? upgrade to 1.45 and downgrade, 1.4? good, but you still need an entry point, so keep reading. Carefully follow this guide if you dont have flipnote studio preinstalled

http://gbatemp.net/threads/dsi-downgrading-the-complete-guide.393682/

HARDMOD is a must with this guide, You must be comfortable soldering to pads that are as small as 0.5mm in diameter.

if you have flipnote studio preinstalled on your DSi. Look for ugopwn, mighty GOOGLE will help, and carefully follow the instuctions on this post

http://gbatemp.net/threads/ugopwn-usa-flipnote-studio-dsi-sploit.479353/ safety increases using this:

http://gbatemp.net/threads/hiyacfw-discussion.478848/page-44#post-7509380

Dump your nand_dsi.bin. Carefully follow this guide

http://gbatemp.net/threads/gbatemp-dsi-modding-help-thread-and-guide.481118/#post-7520400

Testing your modded nand with no$gba is a MUST! do not inject modded nands without testing them first.

Want to install some of your DSiWare Backups? Carefully follow this guide:

http://gbatemp.net/threads/photo-gu...backups-on-real-hardware-and-emulator.476817/.

It´s all here in GBATEMP, reading and understanding the guides is basic, even the noobest noob (that would be me ) can get away with it.

Wait, what about RocketLauncher and HiyaCFW? they will be ready when they are ready (if ever) dont bother the devs with release dates .

homebrew? go https://dsiguide.me/homebrew-downloads

Thanks so much for explaining it for me. I also forgot about dsiguide.me.

 

[Owenge]

Wow, thank you guys/girls for the help

As for the system version, I don't know. I will check when i get home, I will post it when i find out..... sorry

 

[Owenge]

My Dsi is on 1.4.5

 

[Owenge]

what is your system version? higher than 1.4 will require a downgrade, lower than 1.4? upgrade to 1.45 and downgrade, 1.4? good, but you still need an entry point, so keep reading. Carefully follow this guide if you dont have flipnote studio preinstalled

http://gbatemp.net/threads/dsi-downgrading-the-complete-guide.393682/

HARDMOD is a must with this guide, You must be comfortable soldering to pads that are as small as 0.5mm in diameter.

if you have flipnote studio preinstalled on your DSi. Look for ugopwn, mighty GOOGLE will help, and carefully follow the instuctions on this post

http://gbatemp.net/threads/ugopwn-usa-flipnote-studio-dsi-sploit.479353/ safety increases using this:

http://gbatemp.net/threads/hiyacfw-discussion.478848/page-44#post-7509380

Dump your nand_dsi.bin. Carefully follow this guide

http://gbatemp.net/threads/gbatemp-dsi-modding-help-thread-and-guide.481118/#post-7520400

Testing your modded nand with no$gba is a MUST! do not inject modded nands without testing them first.

Want to install some of your DSiWare Backups? Carefully follow this guide:

http://gbatemp.net/threads/photo-gu...backups-on-real-hardware-and-emulator.476817/.

It´s all here in GBATEMP, reading and understanding the guides is basic, even the noobest noob (that would be me ) can get away with it.

Wait, what about RocketLauncher and HiyaCFW? they will be ready when they are ready (if ever) dont bother the devs with release dates .

homebrew? go https://dsiguide.me/homebrew-downloads

can you try and explain in a simpler way (sorry)

 

[Deleted User]

can you try and explain in a simpler way (sorry)

First question. Do you have any DSiWare at all? (Purchased from the DSi Shop.)

 

[Owenge]

First question. Do you have any DSiWare at all? (Purchased from the DSi Shop.)

nope, only flipnote studio

 

[ThisIsDaAccount]

nope, only flipnote studio

Perfect. That's all you need.

 

[Owenge]

Perfect. That's all you need.

link's or no?

 

[Deleted User]

link's or no?

You will need to search Google for an "ugopwn" download. We are not allowed to post direct links, for that would be engaging in illegal activities (apparently). Once you have the file (it should be a ZIP file), there should be instructions in the form of a README to help you from there. Good luck.

 

[Owenge]

You will need to search Google for an "ugopwn" download. We are not allowed to post direct links, for that would be engaging in illegal activities (apparently). Once you have the file (it should be a ZIP file), there should be instructions in the form of a README to help you from there. Good luck.

Thank you and understandable, I heard it was leaked at some point

 

[Owenge]

Ok can't find anything

 

[Deleted User]

Ok can't find anything

You will need to traverse to a website which includes "/vg/" in it's URL. From there, you must find a link to a website with the domain "anonfiles.cc". I'm probably on the brink of getting a warning for distributing warez or something like that, so I will not help you from here on. If you do happen to need more help, then you must ask somewhere else.

 

[Owenge]

You will need to traverse to a website which includes "/vg/" in it's URL. From there, you must find a link to a website with the domain "anonfiles.cc". I'm probably on the brink of getting a warning for distributing warez or something like that, so I will not help you from here on. If you do happen to need more help, then you must ask somewhere else.

Thank you. now how do I close a thread

 

[RocketRobz]

Thank you. now how do I close a thread

You can leave it as it is (no lock, though), or ask a mod to lock it.

 

[Owenge]

You can leave it as it is (no lock, though), or ask a mod to lock it.

Ok

 

[SmellyPirateMonkey]

I found it myself after like 4 pages of searching. It's out there. The page I found I had to scroll through the comments a bit before I found the link. It didn't have the fwtool.nds file though. I eventually found that on github. Good luck.

Oh and I hear Google filters some file sharing sites so maybe try duck duck go.

Sent from my toaster running Rebug