all of the modchip prototypes i have seen are basically internal versions of the usb dongle, using fusee gelee. some are more clever than others, but all are basically just internalized usb dongles.
all of the modchip prototypes i have seen are basically internal versions of the usb dongle, using fusee gelee. some are more clever than others, but all are basically just internalized usb dongles.
Well, is even posible to do a fusee gelee modchip that is not a internal usb dongle? because that whould be amazing, to be honest
- Joined
- Jan 22, 2015
- Messages
- 535
- Trophies
- 0
- Age
- 44
- Location
- Military base.
- Website
- colorslive.com
- XP
- 650
- Country
Now its looking good.
For the batteries you can buy cheap on Hobbyking.com, they have lipos, life, li-ion, good turnigy LSD Nimh and whatever you will want for a nice price...
For the batteries you can buy cheap on Hobbyking.com, they have lipos, life, li-ion, good turnigy LSD Nimh and whatever you will want for a nice price...
@Ninoh-FOX have you thought about hooking up an sd card to the SPI on the trinket for easily swappable payloads? Looks like there is enough io for this and even possibly a button to switch between payloads.
-(e)
-(e)
Is genma adafruit a nice candidate too? Seems to embark battery controller and compatible chip. Shape is fun imho.
The Gemma M0 looks pretty nice, but you still would need something to charge the LiPo.
Last edited by tecfreak,
Would a 40mAh battery be sufficient for the Trinket M0? It's smaller than the Adafruit 150mAh battery.
40 mah: https://www.aliexpress.com/item//32663082505.html
Another good candidate.
slim 120mAh: https://www.aliexpress.com/item//32825594279.html
Another good candidate.
slim 120mAh: https://www.aliexpress.com/item//32825594279.html
Last edited by riyyi,
The chip of a nes mini is too big for a dongle, maybe as a payload deliverer that is not a dongle, but it whould not be a dongle whit that size, i may be wrong
More more more small.
I like the jig. I was thinking about using an official joy con rail to fashion a jig from. Any progress pics on that?
- Joined
- Jan 22, 2015
- Messages
- 535
- Trophies
- 0
- Age
- 44
- Location
- Military base.
- Website
- colorslive.com
- XP
- 650
- Country
@Ninoh-FOX good work man, can't believe how small you managed to get it.
More more more small.
Find A Factory In china and mass produce this puppy.
--------------------- MERGED ---------------------------
just a question as you have seen with xecuter dongol it has 2 giant cap, why not go this way instead of a battery to save space and shrink it more.
or you guys afriad it might brick the switch
I wonder what the real name of the 'Trinket M0' is or if they had it made for themselves, other than stamping the name on it.
Stm M0 is super cheap on eBay. https://www.ebay.com/itm/STM32F030F...Board-SWD-ISP-MicroUSB-32bit-BBC/142665526610
Trinket M0 is the name of the product that was made by adafruit. It uses a ATSAMD21 uC made by Microchip (former Atmel) and this uC has a ARM Cortex M0 core.
The STM32F0 has also a M0 core, but not all of these uCs have usb host capabilities. The STM dev boards are also much bigger than the trinket for example.
Similar threads
