1. RazorX2014

    RazorX2014 GBAtemp Advanced Fan
    Member

    Joined:
    Mar 18, 2014
    Messages:
    620
    Country:
    i live in the uk so a Adafruit Feather M0 Adalogger is easier for me to get as i can currently buy them off amazon uk so i would love to see a step by step guide to set that up for this project, ideally a youtube video would be great so i hope to see that at some point :D

    also i can't remember if i posted it here but for anyone who's interested, the SX Pro super capacitors are KAMCAP 2.7V 0.35F Farad Super Capacitor Ultra Capacitor so if you were wondering about that for your project that's what they are.
     
    Last edited by RazorX2014, Jul 12, 2018
  2. hippy dave

    hippy dave BBMB
    Member

    Joined:
    Apr 30, 2012
    Messages:
    6,073
    Country:
    United Kingdom
    Just confirming, where the fusee ledee section talks about hardware inconsistencies leading to bricked devices, it means bricked router dongles, not bricked Switches, right?
     
  3. Wierd_w

    OP Wierd_w GBAtemp Fan
    Member

    Joined:
    May 12, 2018
    Messages:
    406
    Country:
    United States

    Correct. The dongle is (as far as I know) not capable of harming the NX console itself. Bricked dongles, not consoles.
     
    hippy dave likes this.
  4. leerz

    leerz GBAtemp Advanced Fan
    Member

    Joined:
    Jan 11, 2015
    Messages:
    608
    Country:
    Sharing my Gemma M0 build
    case is 3D Printed
    I wanted to encase the both USB adapters too but kinda rushed the case from my excitement.

    Didn't have the time to create a reset button too, so power cycle is required to get the light steady.
    I was thinking of using supercapacitors but I need to research about those first lol
     

    Attached Files:

    Last edited by leerz, Jul 19, 2018
    stewacide, Moko and aut0mat3d like this.
  5. RazorX2014

    RazorX2014 GBAtemp Advanced Fan
    Member

    Joined:
    Mar 18, 2014
    Messages:
    620
    Country:
    really nice xD but you should consider using something like this:
    https://www.ebay.co.uk/itm/DIY-24pi...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
    that way you get rid of 2 adapters
     
    ahamza61 likes this.
  6. leerz

    leerz GBAtemp Advanced Fan
    Member

    Joined:
    Jan 11, 2015
    Messages:
    608
    Country:
    yes, that was my original plan + edited 3d printed case, however ordering it will set me back 2 weeks due to shipping time.
    those 2 adapters were easy to find in a gadget mall here in Manila (Philippines)

    early photos showing standard usb to otg cable - this was me trying to show my 3d printer guy how I wanted it to be cased.
    using lilypad cr2032 case (the photo from before i ditched that and used cr1220 instead - guarantees that the batt will fit.

    hopefully when I make the v2, with the supercap :P depends on the demand here locally.
     

    Attached Files:

    Last edited by leerz, Jul 20, 2018
  7. Hodorian

    Hodorian Advanced Member
    Newcomer

    Joined:
    May 23, 2018
    Messages:
    59
    Country:
    Germany
    Does the tx dongle charge if it is plugged in in the switch (not rcm) ?

    I get only 1.1V from the switch.
     
  8. Wierd_w

    OP Wierd_w GBAtemp Fan
    Member

    Joined:
    May 12, 2018
    Messages:
    406
    Country:
    United States
    It should. The switch supplied sufficient power to turn on a zsun on an adapter when in normal mode.
     
  9. Hodorian

    Hodorian Advanced Member
    Newcomer

    Joined:
    May 23, 2018
    Messages:
    59
    Country:
    Germany
    From the switch or the dock?

    Can you measure the voltage?

    Does someone know where i can find a specification for usb-c. I think i need to connect a resistor between ground and a special pin.
     
  10. Wierd_w

    OP Wierd_w GBAtemp Fan
    Member

    Joined:
    May 12, 2018
    Messages:
    406
    Country:
    United States
    Directly from the bottom of the switch. If it follows normal USB spec, it is 5v, with a max current of 500ma. (up to 1a if the device properly responds to a USB interrogation request packet, and requests high power draw.)
     
  11. mattytrog

    mattytrog You don`t want to listen to anything I say.
    Member

    Joined:
    Apr 27, 2018
    Messages:
    3,708
    Country:
    United Kingdom
    Haha! Nintendo are exempt apparently
     
  12. Wierd_w

    OP Wierd_w GBAtemp Fan
    Member

    Joined:
    May 12, 2018
    Messages:
    406
    Country:
    United States
    I know, right?

    Still-- It is able to provide 5v, since it powered on the zsun.
     
  13. mattytrog

    mattytrog You don`t want to listen to anything I say.
    Member

    Joined:
    Apr 27, 2018
    Messages:
    3,708
    Country:
    United Kingdom
    Yep you are spot on in what you say.
    It takes the mickey that Ninty haven`t stuck to specs thats all :)
     
  14. Hodorian

    Hodorian Advanced Member
    Newcomer

    Joined:
    May 23, 2018
    Messages:
    59
    Country:
    Germany
  15. RazorX2014

    RazorX2014 GBAtemp Advanced Fan
    Member

    Joined:
    Mar 18, 2014
    Messages:
    620
    Country:
    that's only for an otg cable if i'm remembering correctly but if you order something like this:
    https://www.ebay.co.uk/itm/DIY-24pi...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649

    it's already done for you and ready to go.
     
  16. Hodorian

    Hodorian Advanced Member
    Newcomer

    Joined:
    May 23, 2018
    Messages:
    59
    Country:
    Germany
    At such a connector i measured the 156kOhm.
    And with this connector, i can't charge with the switch. (in the end it's not that important for me, since i can charge with my computer. And with a full charged battery i can use the dongle 10000 times)
    But i think for the guy with the capacitors it's important to charge with the switch.
     
  17. yyoossk

    yyoossk GBAtemp Regular
    Member

    Joined:
    Oct 18, 2017
    Messages:
    123
    Country:
    Japan
    superswaz likes this.
  18. superswaz

    superswaz Newbie
    Newcomer

    Joined:
    Apr 7, 2018
    Messages:
    7
    Country:
    United Kingdom
    Thats awesome! What is/are the converters being used in the Pokemon Go trinket?

    Any links?
     
  19. RazorX2014

    RazorX2014 GBAtemp Advanced Fan
    Member

    Joined:
    Mar 18, 2014
    Messages:
    620
    Country:
    i believe all they have done is took out the board from the pokemon go dongle and put a adafruit trinket m0 in there and just used the button on the pokemon go dongle, there basically just using it as nothing more than a case
     
  20. superswaz

    superswaz Newbie
    Newcomer

    Joined:
    Apr 7, 2018
    Messages:
    7
    Country:
    United Kingdom
    Sorry, meant the micro usb to usb c...
     
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - development, (Research, thread)