Hacking Best Way to Mod Any Wii: ModMii for Windows: Official Support Thread

[madrat]

Does this tolll download everything that I need to install the Homebrew on my Wii?
How do I install the Homebrew, when I have download everything?

 

[rookrook]

hi, i have a question , ive run this program a few times when moding friends wii's , everytime i do the install wads section , when its running threw the install process the sytemmenu never install s with the batch loader is there a reason for this , also installing the new system menu after all the other wads will this cause me problems >? im changing from 4.1e-4.2e full mod any help would be grate as i said before great program .

 

[kylster]

if your having problems installing the new system menu grab Dop-Mii Wiibrew Edition v14.5 and install the desired System Menu

it will inform you if you have the correct IOS to run the new System Menu and ask you to install it. It's pretty simple and it uses IOS58+ method for direct hardware access so you shouldnt have a problem.

 

[XFlak]

if your having problems installing the new system menu grab Dop-Mii Wiibrew Edition v14.5 and install the desired System Menu

it will inform you if you have the correct IOS to run the new System Menu and ask you to install it. It's pretty simple and it uses IOS58+ method for direct hardware access so you shouldnt have a problem.

dude, terrible terrible advice!!! All apps that use the no_ios_reload tag in the meta.xml for direct hardware access is susceptible to the hbc network init. bug if u don't have a working internet connection. Normally this isn't a big deal, because most safe apps using that don't touch vital files on the Wii, but if it were to crash in the middle of installing a system menu, it could lead to a brick.

Anyways, u need to install the SM IOS before installing the SM, otherwise MMM and yawmm will not allow u to install the SM, thats why it fails on the first try and passes on he second try. Which is totally safe to do (to answer one of the above Qs).

I have an idea to make ModMii always install the SM IOS before the SM even while in batch, so hopefully this wont be an issue much longer.

 

[rookrook]

if your having problems installing the new system menu grab Dop-Mii Wiibrew Edition v14.5 and install the desired System Menu

it will inform you if you have the correct IOS to run the new System Menu and ask you to install it. It's pretty simple and it uses IOS58+ method for direct hardware access so you shouldnt have a problem.

dude, terrible terrible advice!!! All apps that use the no_ios_reload tag in the meta.xml for direct hardware access is susceptible to the hbc network init. bug if u don't have a working internet connection. Normally this isn't a big deal, because most safe apps using that don't touch vital files on the Wii, but if it were to crash in the middle of installing a system menu, it could lead to a brick.

Anyways, u need to install the SM IOS before installing the SM, otherwise MMM and yawmm will not allow u to install the SM, thats why it fails on the first try and passes on he second try. Which is totally safe to do (to answer one of the above Qs).

I have an idea to make ModMii always install the SM IOS before the SM even while in batch, so hopefully this wont be an issue much longer.

thanx for the quick answer XFlak

 

[kirill20061]

XFlak, why when I try to save setting for hacks in PriiLoader, they don't save!!!??? It just restarts and views homebrew channel!!

 

[Zod]

Modmii is 1 f......g amazing program..... Please donate to have XFLAK on our side... For every console that i will modd from now on i will donate.... same as for mine... Sooo.... if you like... if you used... if you did it your job... please donate to support next releases....

. . .
.....
Best regards...

 

[hellboy18]

thanks XFlak.. u thought you said you weren't releasing a new version for some while now, but you just released 4.4.1!! i can see that there can be a few bugs, anyways i really enjoy your releases!

 

[phillyguy]

am i did anything wrong. now my House Of The Dead 2 & 3 Returns game not working, i set "Block IOS reload" to on and had try all ios, none is working. ios224 work but it's black screen after exit out from game. before when i exit out from game it go to wii menu but now black screen. i use modmii windows 4.4.1. my wiiflow is wiiflow2.2 rc304. wii system 4.2u.. please help

 

[XFlak]

@phillyguy, HOD2&3 is a special case game
use the alt-dol option, HOD2 2 play HOD2 and normal if u want to CHOOSE HOD3

@kirill20061, ur doing something wrong. Most likely u didn't follow ModMii's instructions, u just saw "manage priiloader hacks" options in MMM and tried using that without even installing priiloader. If u give me more info, I can probably help u, but as of now, the only explanation I can give u is that u r making up your own steps instead of following ModMii's, if i'm wrong, i apologize

@Zod, +999999, thx dude!

 

[phillyguy]

is this good? i can get 249 rev20b to work. not sure how to do it

sysCheck v2.0.1 by Double_A
...runs on IOS58 (rev 6176).

Region: NTSC-U
System Menu 4.2U (v481)
Hollywood v0x11
Console ID: 75330206
Boot2 v4

Found 57 titles.
Found 45 IOS on this console. 4 of them are stub.

IOS4 (rev 65280): Stub
IOS9 (rev 1034): No Patches
IOS10 (rev 768): Stub
IOS11 (rev 16174): Trucha Bug
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 512): Stub
IOS17 (rev 1032): No Patches
IOS20 (rev 16174): Trucha Bug
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 16174): Trucha Bug
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 3608): No Patches
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 14889): Trucha Bug
IOS51 (rev 4864): Stub
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): No Patches
IOS60 (rev 16174): Trucha Bug
IOS61 (rev 5662): No Patches
IOS70 (rev 16687): Trucha Bug
IOS202 (rev 65535): Trucha Bug
IOS222 (rev 65535): Trucha Bug
IOS223 (rev 4): Trucha Bug
IOS224 (rev 65535): Trucha Bug
IOS236 (rev 65535): Trucha Bug
IOS249 (rev 20): Trucha Bug
IOS250 (rev 65535): Trucha Bug
IOS254 (rev 65281): BootMii
BC v6
MIOS v4

Report generated on 2010/12/04.

 

[XFlak]

r u trying to use an alt dol on HOD2+3? All u need to do, is go to ur usb-loader settings for that game and change the alt-dol to HOD2 to play HOD2, and if u want to play HOD3, leave the alt-dol setting alone, but when u start the game and it asks u to choose HOD2 or HOD3, only HOD3 will work, to get HOD2 to to work, u need to use the HOD2 alt-dol

edit: and yes, ur syscheck report looks fine

 

[Youkai]

Well after I did not do anything at all to my wii cuz it worked i finaly got to a point where i at least thaught i need to upgrade because a game did not work.

Now I loaded your ModMii went trough the wizard and it loaded several files onto my SD card ...

well i installed BootMii which i never used before (sadly i didn't read and installed it as main ios or whatever) now it boots all the time when i start my Wii even thought i said to uninstall it oO
and its installed as boot 2 as well ... weirdly sometimes it just flasheds and goes to the normal wii menu oO
----eidt---- when starting the menu is just blinking weirdly and than boots as it should ... is this normal ?


well ok no there were several wad files and it said to me in that priiloder that ~20 datas were installed sucsessfull and ~14 not ... and there was something written about ticket(-0.....)

another thing was the guide telling me something about ios 58 which i should have gotten trough installation but i have 61 or something ? (that ok ?)

well just doing that NAND backup which gave me a hand full "Factary bad Block" and "Corrected Page..."

 

[XFlak]

read the guide more carefully, i've bolded the parts of the guide that already answer your questions

2) MAKING A NAND BACKUP

While inside the Homebrew Channel, load BootMii by pressing home and clicking Launch Bootmii.
Press the power button on the wii 3 times to get to the last option, then press the reset button. [You can also navigate with a Gamecube controller]

Press reset to choose the first option, then follow the directions on the screen to make your NAND backup. [Bad blocks are no problem.]

Backup the Bootmii folder, NAND.bin, and keys.bin elsewhere and erase from the sd card (or rename it). You'll need these in case of emergencies, so don't lose them.
Go back to The Homebrew Channel.

Note: if Bootmii was installed as boot2, then it will show up as soon as the Wii is turned on AS LONG AS it finds the bootmii folder (mentioned above) on the root of the SD card.bad blocks are normal

4) INSTALL WADS

Load Multi-Manager Mod (MMM) via the HomeBrew Channel.
If IOS236 is not already loaded, select "Load another IOS", then select IOS236

Note: If this step fails with error -ret 2011 or other, you may need to retry patching IOS236. If the Wii was previously softmodded, you can try loading cIOS250 (or others like 202,222,223,224,236,249)

QUOTE

5) INSTALL PRIILOADER

Launch Multi-Mod Manager (MMM) via the Homebrew Channel

Note: IOS236 should be loaded automatically.
If it isn't, select "Load another IOS" and select IOS236
(or any IOS you know is patched).

In Multi-Manager Mod's main menu, go down to select "App Manager",
Then select the "Priiloader installer".
After the Priiloader Installer loads, press + to install it using the loaded IOS.

Priiloader may give the following two 'yellow' errors. These are expected and are not an issue.
loader.ini couldn't delete error -106
password.txt couldn't delete error -106

After successfully installing Priiloader, access it by powering off the wii,
then powering it back and holding reset while it's booting until you see the Priiloader menu.

You should install some system menu hacks now (by going to System Menu hacks option).

RECOMMENDED HACKS: Block Disc Updates, Block Online Updates, Replace Health Screen, Auto-Press A at Health Screen, Disable Deletion of some important channels, Region-Free Everything, remove no copy save file protection, and Move Disc Channel.

The priiloader menu is white by default, you can change it to black in the Priiloader settings if you prefer.

One of the special functions of Priiloader is that it can autoboot any app/file instead of the system menu. Some apps (like crazyIntro) can't be used without it.
For details on how to do so, visit http://www.completesoftmodguide.tk/system-hacks/priiloader

 

[kirill20061]

ModMii 4.4.0 Custom Guide
Generated on 03.12.2010 - 23:08:17,29
Check for updates at tinyurl.com/ModMiiNow


This Guide was generated using the following parameters:

* Wii is currently a virgin (un-modified)
* Current firmware is 4.2E
* Desired firmware is 4.2E


* Download Extra Brick Protection
* Update active IOSs



This software is not for sale. If you paid for this software or a "bundle" you have been scammed.

THIS PACKAGE COMES WITH ABSOLUTELY NO WARRANTY, NEITHER STATED NOR IMPLIED.
NO ONE BUT YOURSELF IS TO BE HELD RESPONSIBLE FOR ANY DAMAGE THIS MAY CAUSE TO YOUR NINTENDO WII CONSOLE!
USE THIS AT YOUR OWN RISK!



IMPORTANT NOTES:

*This guide does NOT require a Wifi connection on your Wii.
*An SD card formatted to FAT(32) required (Best results are with non-SDHC cards, SDHC will only work on 4.0 or above).
*If you get errors during any of the steps reformat your SD card as FAT or FAT32
*Turn off WiiConnect24 and take out all gamecube memory cards/controllers when modding the Wii (unless instructed otherwise).
*If your Wii ever freezes, hold the power button on the Wii for 5 seconds to power it off then try again.
*Don’t ever accept a new Nintendo update without first googling to see if it’s safe. The last update (to 4.3) was released in late June 2010 and is NOT safe to accept. If you accept an official Nintendo update after modding the Wii, you may lose some or all of your modifications.
*Never uninstall a system menu or IOS
*Do not install untested wads/themes without Bootmii or Priiloader installed.
*This custom guide is great start, but Wii modding is always evolving. Check for updates online, and remember, google is your friend.
*If you have questions, a more detailed guide can be found here: <a href="http://www.completesoftmodguide.tk" target="_blank">http://www.completesoftmodguide.tk</a>




1) INSTALLING THE HOMEBREW CHANNEL (HBC) AND BOOTMII
=================================================



Run BannerBomb v2 by selecting the SD Card Button on the main system menu screen and choosing yes to load boot.dol/elf
Note: If it doesn't work for you, visit <a href="http://bannerbomb.qoid.us/" target="_blank">http://bannerbomb.qoid.us/</a> for more variations of either version of bannerbomb.



This runs the Hackmii Installer (and silently/automatically installs BootMii as IOS). Use the installer to install the Homebrew Channel (HBC) and Bootmii as Boot2 if possible. If you cannot install BootMii as Boot2, you also need to 'prepare an SD Card' for BootMii (as the 'BootMii' folder is required to launch BootMii as IOS or Boot2).

Note: If you get a 'no vulnerable IOS' error message, run ModMii again and this time select the 'Hackmii Solutions' option instead of 'ModMii Wizard' and follow the new instructions before continuing this guide.

After you exit the hackmii installer, you will be taken to the HBC.
Hit the home button. In the top right corner you will see the IOS used by the HBC.

If the HBC is using an IOS other than IOS58 or your homebrew channel is upside-down, make a note of it as it applies later in the guide (you will have to reinstall the HBC).

If it is using IOS58 and your HBC is not upside-down, you can skip the Reinstall The Homebrew Channel step when you get to it.




2) MAKING A NAND BACKUP
====================

While inside the Homebrew Channel, load BootMii by pressing home and clicking Launch Bootmii.
Press the power button on the wii 3 times to get to the last option, then press the reset button. [You can also navigate with a Gamecube controller]

Press reset to choose the first option, then follow the directions on the screen to make your NAND backup. [Bad blocks are no problem.]

Backup the Bootmii folder, NAND.bin, and keys.bin elsewhere and erase from the sd card (or rename it). You'll need these in case of emergencies, so don't lose them.
Go back to The Homebrew Channel.

Note: if Bootmii was installed as boot2, then it will show up as soon as the Wii is turned on AS LONG AS it finds the bootmii folder (mentioned above) on the root of the SD card.




3) INSTALL A PATCHED IOS236
========================

Start the Homebrew Channel.

VERY IMPORTANT!
In the Homebrew channel, if you do not have a working internet connection already set up, you will see an icon flashing in the bottom right corner of the screen indicating its inability to initialize the network. You MUST wait for the icon to stop flashing OR let it flash for 30-60 seconds before proceeding otherwise these apps will error shortly after being launched. If you encounter this harmless error, power off the Wii and repeat this step from the beginning. To increase your chances of success, add a working internet connection to your Wii via the official Wii Settings Menu, but be sure to say "No" when asked to perform an update.


You only need to perform ONE of the below methods.


Method A: Using IOS236 Installer
--------------------------------

After waiting 30-60 seconds for the HBC to attempt to initialize the network, launch "IOS236 Installer".
Note: This app must be launched using HBC v1.0.7 or higher in order to work properly.

Push 1.
Choose "Load IOS from SD card",
Confirm your choice with the A button,
When prompted, push A to continue the installation.

When asked whether to perform Step 2, Press "2" to skip it.
Then push any button to exit.

If you experience errors, keep trying and it should eventually work.
If you continue to experience errors you can try using Simple IOS Patcher instead.
Once either method successfully installs IOS236, you can move onto the next step.


Method B: Using Simple IOS Patcher
----------------------------------

After waiting 30-60 seconds for the HBC to attempt to initialize the network, launch "IOS236 Installer".
Note: This app must be launched using HBC v1.0.7 or higher in order to work properly.

Choose "IOS36" (already selected by default) and push A,
Select "Install IOS to slot" and choose 236,
Select "Install patched IOS36" leaving the 4 patches set to "yes" and press A,
Choose "Load IOS from SD card".

Confirm your choice with the A button,
When prompted, push A to continue the installation.
When the installation is over you'll be back at the Main Menu,
Then push B button to exit.

If you experience errors, keep trying and it should eventually work.
If you continue to experience errors you can try using IOS236 Installer instead.
Once either method successfully installs IOS236, you can move onto the next step.




4) INSTALL PRIILOADER
==================

Launch Multi-Mod Manager (MMM) via the Homebrew Channel

Note: IOS36 or 236 should be loaded automatically.
If it isn't, select "Load another IOS" and select IOS36 or 236
(or any IOS you know is patched).

In Multi-Manager Mod's main menu, go down to select "App Manager",
Then select the "Priiloader installer".
After the Priiloader Installer loads, press + to install it using the loaded IOS.

Priiloader may give the following two 'yellow' errors. These are expected and are not an issue.
loader.ini couldn't delete error -106
password.txt couldn't delete error -106

After successfully installing Priiloader, access it by powering off the wii,
then powering it back on and holding reset while it's booting until you see the Priiloader menu.

You should install some system menu hacks now (by going to System Menu hacks option).

RECOMMENDED HACKS: Block Disc Updates, Block Online Updates, Replace Health Screen, Auto-Press A at Health Screen, Disable Deletion of some important channels, Region-Free Everything, remove no copy save file protection, and Move Disc Channel.

The priiloader menu is white by default, you can change it to black in the Priiloader settings if you prefer.

One of the special functions of Priiloader is that it can autoboot any app/file instead of the system menu. Some apps (like crazyIntro) can't be used without it.
For details on how to do so, visit <a href="http://www.completesoftmodguide.tk/system-hacks/priiloader" target="_blank">http://www.completesoftmodguide.tk/system-hacks/priiloader</a>




5) INSTALL WADS
============

Load Multi-Manager Mod (MMM) via the HomeBrew Channel.
If IOS236 is not already loaded, select "Load another IOS", then select IOS236

Note: If this step fails with error -ret 2011 or other, you may need to retry patching IOS236. If the Wii was previously softmodded, you can try loading cIOS250 (or others like 202,222,223,224,236,249)

In Multi-Manager Mod's main menu, go down to select "WAD Manager".

Install the following WADs from the WAD folder (this list of WADs is unique to how you answered the Wizard's questions).

Be careful not to install any additional wads that may have been previously saved in this folder (they may be safe, but I cannot say for sure).

Hold + for 2 seconds to select all the WADs in the folder. Then Press A twice to install them all.
If any files fail to install properly, they will remain marked for installation, so just retry installing those files.


Your unique list of wads to install are as follows:

* IOS11v16174(IOS60v6174[FS-ES-NP])
* IOS20v16174(IOS60v6174[FS-ES-NP])
* IOS30v16174(IOS60v6174[FS-ES-NP])
* IOS50v14889(IOS50v4889[FS-ES-NP])
* IOS60v16174(IOS60v6174[FS-ES-NP])
* IOS70v16687(IOS70v6687[FS-ES-NP])
* cIOS202[57]-v5
* cIOS223[37-38]-v4
* cIOS222[38]-v5
* cIOS224[57]-v5
* cIOS250[57]-v20
* cIOS249[56]-v20
* RVL-cmios-v4_WiiGator_GCBL_v0.2
* IOS9-64-v1034
* IOS12-64-v526
* IOS13-64-v1032
* IOS14-64-v1032
* IOS15-64-v1032
* IOS17-64-v1032
* IOS21-64-v1039
* IOS22-64-v1294
* IOS28-64-v1807
* IOS31-64-v3608
* IOS33-64-v3608
* IOS34-64-v3608
* IOS35-64-v3608
* IOS36-64-v3608
* IOS37-64-v5663
* IOS38-64-v4124
* IOS41-64-v3607
* IOS43-64-v3607
* IOS45-64-v3607
* IOS46-64-v3607
* IOS48-64-v4124
* IOS53-64-v5663
* IOS55-64-v5663
* IOS56-64-v5662
* IOS57-64-v5919
* IOS58-64-v6176
* IOS61-64-v5662
* USBLoader(s)-ahbprot58-SD-USB-IDCL
This is a forwarder channel that will load the first file it finds from the following list:
SD:/apps/usbloader_cfg/boot.dol
USB:/apps/usbloader_cfg/boot.dol
SD:/apps/usbloader/boot.dol
USB:/apps/usbloader/boot.dol
SD:/apps/usb-loader/boot.dol
USB:/apps/usb-loader/boot.dol
SD:/apps/usbloader_gx/boot.dol
USB:/apps/usbloader_gx/boot.dol
Note: First the SD Card is checked, then your USB Hard Drive (formatted as FAT32).
You should always have at least one forwarder channel installed on your Wii,
that way, in the event of accidental update, you will be able to rehack your Wii without relying on a disc based exploit




6) REINSTALL THE HOMEBREW CHANNEL (if applicable)
==============================================

Earlier you should have checked what IOS is used by the Homebrew Channel (HBC). If the IOS used by your HBC is IOS58 and your HBC is not upside-down, you can skip this step.

If the HBC is using an IOS other than IOS58 or your HBC is upside-down, you should reinstall the HBC.

Launch the HackMii_Installer via the HBC.
Use the Hackmii Installer to fix/re-install the HBC. Once you've successfully reinstalled the HBC, you can move onto the next step of the guide.

If the HBC is failing to load the HackMii_Installer (just blackscreens), instead launch the Hackmii Installer using the method described in the First Step




7) AFTER MODDING
=============

After you are done modding your Wii, you can optionally delete any unnecesarry files
by using ModMii's "File Cleanup" Feature.

If you choose not to use the File Cleanup feature, in order to avoid having your Wii freeze when accessing the SD Card Menu, you should delete the 'aktn' folder where bannerbomb is saved (SD:\private\wii\title\aktn), or rename the entire 'private' folder.

At this point you're practically done.
Now you should be downloading the latest homebrew applications and setting them up on
your SD Card (or FAT32 USB Hard Drive) so they can be launched via the HBC.

For playing your backups off a USB hard drive, run the USB-Loader Setup feature from ModMii's Main Menu

For downloading applications, you should:
* Check out ModMii's batch download pages as it has many popular apps available for download.
* Download Homebrew Browser via ModMii to get many popular apps, but this is an online only Wii application (http://www.completesoftmodguide.tk/how-to-use/hbb)
* For those without internet on their Wii, check out this list of Homebrew applications (wiibrew.org/wiki/List_of_all_homebrew).
Another great resource is webrewwii.blogspot.com

After getting whatever apps you want, you should get a boot.dol file and possibly a icon.png and meta.xml.
For HBC to read your SD/USB correctly, your card must be structured SD:/apps/application name/boot.dol
If you have a *.dol not named boot.dol, rename it boot.dol, otherwise it will not be recognized by the HBC.
(optional: the icon.png and meta.xml should be saved in the same place as the boot.dol)



8) SUPPORT XFLAK
=============

IF MODMII WORKED FOR YOU, PLEASE VOTE IN FAVOUR OF THE PROGRAM HERE (tinyurl.com/ModMiiNow)

DONATIONS CAN OPTIONALLY BE MADE VIA PAYPAL TO [email protected]

CHECK OUT MY TOP CHANNELS HERE (tinyurl.com/topchannels)

CHECK OUT MY CRAZY INTRO VIDEOS HERE (tinyurl.com/crazyintro)

This is what i followed!! And when I choose MMM nad priiloader hacks in MMM, i choose
You should install some system menu hacks now (by going to System Menu hacks option).

RECOMMENDED HACKS: Block Disc Updates, Block Online Updates, Replace Health Screen, Auto-Press A at Health Screen, Disable Deletion of some important channels, Region-Free Everything, remove no copy save file protection, and Move Disc Channel.
And when I hit save setting it brings up HBC and nothing saved!!! why??? <img src="style_emoticons/<#EMO_DIR#>/wacko.gif" style="vertical-align:middle" emoid="" border="0" alt="wacko.gif" />

 

[XFlak]

1-launch MMM
2-reload to IOS236 if not already loaded
3-use mmm's app manager to launch priiloader using IOS236
4-install priiloader by pressing +
5-power down the wii, power it back on and hold reset as it is powering down up
6-from the priiloader menu (not the MMM menu) enable w/e priiloader hacks u want

please put your guide in a spoiler, see the first post for error reporting procedure

 

[kirill20061]

5-power down the wii, power it back on and hold reset as it is powering down
when it says wait 5s? then when it shuts down i need to press the reset button???
_________________________________________________________________________
Done this

 

[jodur]

Xflak,just a question out of curiousity for you. I modded serveral Wi's from friends and they all had firmware

 

[Zulithe]

Thanks so much for this software + guide. I needed to remod my wii and found this thread. It was far, far easier to understand and follow than any previous methods I've used. Keep up the great work.

 

[kirill20061]

I did what you said, and nothing!!! When i chose sistem menu hacks there were hacks? and i choose which ones i wanted to install? when i hit save setting and it said settings saved!!! yhen when i try to go to the wii shop it still says that i need to system update!!! but in priiloader i choose " No software updates" and nothing!!! but the setting all that i choose were saved!!! WHY???