Autobleem 0.9.0 Console starts and after loading a bit it shuts down

[Drake008]

Well I downloaded Autobleem Version 0.9.0 and the problem here is that the console starts up and something gets loaded by the console (Powerledd is blinking a bit) but after that the console shuts itself down.

Anyone can help me here?

 

[KiiWii]

WHY DO I SEE A BLACK SCREEN AND THEN CONSOLE POWERS OFF WHEN USING AUTOBLEEM ? I CAN NOT EVEN LOAD AUTOBLEEM NEXT TIME…. CONSOLE DOES NOT EVEN BOOT FROM USB
This is the most asked question on our support Discord and I will try to explain the reason of this issue as clear as possible and also will try to explain why it is not possible at this stage to “fix” it. So … why is it happening ? It is happening because your USB stick or hard drive is not fully supported by hardware of the PSC console. This was TLDR … now the longer

 

[Drake008]

Well I tried now two 16GB USB Sticks (USB3 and USB2), two 32 GB (USB3 and USB2) and one 128GB (USB3) Sticks. All of them let the console turn off. AM I that unlucky?

 

[Drake008]

Well I now tested 12 Sticks (USB3 and USB2 ones) different sizes and so on. But everytime the PSX Classics shuts it self down. Isa there not anything I can do that it would work?