1. Switchnoob82

    OP Switchnoob82 Member
    Newcomer

    Joined:
    Dec 5, 2019
    Messages:
    12
    Country:
    Netherlands
    I just have my hacked switch for a week or so.

    By accident I installed the Nintendo update to 9.1 this morning

    My switch doesn't do anything, screen is Grey that's it.

    Can I downgrade it? I don't have a nand dump.

    I've also read you have to wait for a new dump, how long will this take?

    Hope you guys can help this noob out

    P.s.
    I don't care if I lose safe files or installed games, I just want to play as fast as possible....
     
  2. DaniPoo

    DaniPoo GBAtemp Advanced Fan
    Member

    Joined:
    Jan 2, 2013
    Messages:
    648
    Country:
    I would just wait until someone releases a CFW that supports 9.1.0 if you can't boot.
    The hardware exploit is not patchable so it's pretty safe to say that you eventually will be able to upgrade your CFW and boot normally again.
    It's possible to downgrade your firmware given that you can first boot into CFW, not sure if it's possible via payload injection though.
     
  3. Redbunnymoon

    Redbunnymoon GBAtemp Regular
    Member

    Joined:
    Feb 16, 2015
    Messages:
    183
    Country:
    Austria
    [​IMG]
    My Dogkek Image dont work :(
     
    Last edited: Dec 5, 2019
  4. altorn

    altorn GBAtemp Advanced Fan
    Member

    Joined:
    Jul 15, 2007
    Messages:
    910
    Country:
    Canada
    Which CFW do you have?
    Wait a couple of days. It has come to a point where whenever Nintendo releases a firmware update, 3 new threads are opened in GBATemp asking for help because of accidentally updating to the latest unsupported firmware.
     
  5. pcwizard7

    pcwizard7 GBAtemp Advanced Fan
    Member

    Joined:
    Aug 2, 2013
    Messages:
    742
    Country:
    Australia
    no backup no go u wait. atmos usually takes a week or 2 maybe longer to be updated

    if this was in emunand delete it and create a new one again and use heklate to bypass the fuse check and if you went online here u prob in ban land or coming soon
     
    Last edited: Dec 5, 2019
  6. linuxares

    linuxares I'm not a generous god!
    Moderator

    Joined:
    Aug 5, 2007
    Messages:
    7,164
    Country:
    Sweden
    Need more information than that
     
    stephrk398 likes this.
  7. Hayato213

    Hayato213 GBAtemp Guru
    Member

    Joined:
    Dec 26, 2015
    Messages:
    6,717
    Country:
    United States
    how amusing that everyone says they accidentally update, no NAND backup and you burned your fuse so just wait until SciresM release 9.1.0 support.
     
    HinaNaru Cutie and KiiWii like this.
  8. linuxares

    linuxares I'm not a generous god!
    Moderator

    Joined:
    Aug 5, 2007
    Messages:
    7,164
    Country:
    Sweden
    Yeah the new Masterkey is already dumped so it's just a matter of time again.
     
    fisticuffs, FXDX and Hayato213 like this.
  9. pcwizard7

    pcwizard7 GBAtemp Advanced Fan
    Member

    Joined:
    Aug 2, 2013
    Messages:
    742
    Country:
    Australia
    alot of newbies will always make careless mistakes its how people learn
     
    MUDD_BR likes this.
  10. Switchnoob82

    OP Switchnoob82 Member
    Newcomer

    Joined:
    Dec 5, 2019
    Messages:
    12
    Country:
    Netherlands
    Thanks.... So I just have to wait for a new updated version of atmosphere? Like I said I'm a real newbie, only have the Tegra program installed on my pc (it's all that I needed I was told) do I need more software on my pc?
     
  11. toxic9

    toxic9 GBAtemp Advanced Fan
    Member

    Joined:
    Dec 13, 2016
    Messages:
    610
    Country:
    You can buy a dongle, so you don't need your PC anymore to turn your switch on.
     
  12. azoreseuropa

    azoreseuropa GBAtemp Guru
    Member

    Joined:
    Nov 6, 2002
    Messages:
    8,967
    Country:
    United States
    Always pay attention what you are doing. SMH.

    Then you will have to wait for atmosphere team to update to 9.1.0 then you can use CFW again. It could be a week or two or perhaps few weeks more. Eventually, they will release it.

    Next time pay attention. I have Nintendo Switch 3.0 via ChoiNX to the latest version and never had an accident because I am very pay attention and carefully with what I am doing with Switch for over 2 years.
     
    zxr750j likes this.
  13. Bladexdsl

    Bladexdsl ZOMG my posts...it's over 9000!!!
    Member

    Joined:
    Nov 17, 2008
    Messages:
    18,201
    Country:
    Australia
    YOUR FUCKED
     
    Naked_Snake and Redbunnymoon like this.
  14. pcwizard7

    pcwizard7 GBAtemp Advanced Fan
    Member

    Joined:
    Aug 2, 2013
    Messages:
    742
    Country:
    Australia
    download the following when the updated version is out
    https://sdsetup.com/console?switch#...y;hactool;switchbackupmanager;atmos_sigpatch;

    then follow from step 2 in this guide with sd files in zip file above
    https://switch.homebrew.guide/hacking/fuseegelee/sdsetup#step-2-preparing-software

    A tool to clean your nand as best you can without a backup you could create a nand backup after this too
    https://gbatemp.net/threads/clean-the-nand-of-the-nintendo-switch-haku33-homebrew.548620/

    Create a Emunand for cfw
    https://gbatemp.net/threads/how-to-setup-emunand-keep-sysnand-online.520471/

    Grab Keys needed for somethings and you need to redo this everyt firmware
    https://gbatemp.net/threads/lockpick_rcm-payload-official-thread.532916/

    How to update the firmware next time but always wait for the cfw to be updated
    https://switch.homebrew.guide/usingcfw/manualupgrade

    Incodnito zero your serial as extra protection (ONLY USE IN EMUNAND)
    https://gbatemp.net/posts/8881958/
     
    Last edited: Dec 5, 2019
  15. Switchnoob82

    OP Switchnoob82 Member
    Newcomer

    Joined:
    Dec 5, 2019
    Messages:
    12
    Country:
    Netherlands
    Just for now right
     
    HinaNaru Cutie likes this.
  16. pcwizard7

    pcwizard7 GBAtemp Advanced Fan
    Member

    Joined:
    Aug 2, 2013
    Messages:
    742
    Country:
    Australia
    right then you be able to proceed once atmos is updated when it is you can use my post
     
  17. Switchnoob82

    OP Switchnoob82 Member
    Newcomer

    Joined:
    Dec 5, 2019
    Messages:
    12
    Country:
    Netherlands
    Thanks!!!! Hope it is updated soon!!
     
  18. StealthRoaR

    StealthRoaR Newbie
    Newcomer

    Joined:
    Dec 5, 2019
    Messages:
    7
    Country:
    France
    you're* .... :rofl:
     
  19. digipimp75

    digipimp75 GBAtemp Advanced Fan
    Member

    Joined:
    Jan 16, 2014
    Messages:
    563
    Country:
    United States
    *You're
     
    KiiWii and Username4321 like this.
  20. Switchnoob82

    OP Switchnoob82 Member
    Newcomer

    Joined:
    Dec 5, 2019
    Messages:
    12
    Country:
    Netherlands
    No its correct my surname is fucked so he's correct
     
    MUDD_BR likes this.
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - Accidentally, firmware, updated