Hello everyone!
There was a problem with the left Switch Oled joycon. It is perfectly visible as a set-top box and works both docked and in wireless mode. The problem is that it doesn't charge. The console is new from the store. The owner of the console gave it to me to install HWFLY. Problem number two is that it is not known whether the problem occurred before or after the installation. The person did not check the console after buying it in the store.
There is a component with the designation 4N8 next to the connector of the loop of the left joycon. I compared the readings on this console with the readings on the working one. On the working console at the input (where there are 3 contacts), the voltage is 5.2 v, at the output (where there are 2 on the side of the joycon connector) - 4.7 V. I will attach a photo with a transcript. At this output - 0v, the charge on the joycon does not correspondingly arrive. I put this part 4N8 from working to problematic - the voltage did not appear. So it's not about him. Who has any thoughts on this issue?
Capacitor ratings next to 4N8: 0201 - 100 nf, 0603 - 1 uf
There was a problem with the left Switch Oled joycon. It is perfectly visible as a set-top box and works both docked and in wireless mode. The problem is that it doesn't charge. The console is new from the store. The owner of the console gave it to me to install HWFLY. Problem number two is that it is not known whether the problem occurred before or after the installation. The person did not check the console after buying it in the store.
There is a component with the designation 4N8 next to the connector of the loop of the left joycon. I compared the readings on this console with the readings on the working one. On the working console at the input (where there are 3 contacts), the voltage is 5.2 v, at the output (where there are 2 on the side of the joycon connector) - 4.7 V. I will attach a photo with a transcript. At this output - 0v, the charge on the joycon does not correspondingly arrive. I put this part 4N8 from working to problematic - the voltage did not appear. So it's not about him. Who has any thoughts on this issue?
Capacitor ratings next to 4N8: 0201 - 100 nf, 0603 - 1 uf
Attachments
Last edited by Santos,