EDIT SOLUTION :
I found a way to solve the problem without doing too much manipulation:
From a blank SD card, which will only be used for manipulation, we create an EmuNand, and then once on your EmuNand,
You are updating with daybreak to 14.X.X .
Once the last update is done, take your sd in the computer you open NxNandManager (5.2). You go to PRODINFO, you make a dump of it.
You then insert your SD card with the boot crash error as indicated above, and load your card in NxNandManager.
You go to PRODINFO, you make a dump of it for security.
Then, you right-click on PRODINFO and "restore from file" and you will indicate the PRODINFO that you dumped before on the blank SD card.
Hello ,
I would like your help please. I put below as much explanation as I hope. Thank you
## Switch error report
### What is the problem you encountered?
I bought a switch V1 a year ago on the net with the nand hs. No backup was provided to me because the person did not have to make one.
I bought a complete emmc on Aliexpress and replaced it. I followed a tutorial with a nand donor to make it work, it starts in OFW and CFW.
I wanted to update my EmuMmc from 13.0.0 to 14.1.1 and unfortunately I had a boot crash afterwards.
Stupid as I am, I reversed my sd cards, I had made a backup of my sd card with NxNandManager, but I took the wrong sd card to update.
I made various attempts by creating an Emummc from 13.0.0 and I did update by update and when I get to 14.0.0, I get a boot crash.
I make the decision to update the switch to 14.1.1 via CFW SysNand and I restart it afterwards normally so that the update is official and the efuses burn and I can boot again in CFW EmuNand the sd card which boot crash .
Unfortunately, that didn't change anything.
If I forgot to provide items tell me I will add the information.
### How can the issue be reproduced?
I start the CFW EmuNand console, it crashes after the N* logo.
No problem if I start it in OFW
Error Code : 2105-0584 (0x49069)
Program : 0100000000000025
Firmware : 14.1.1 (Atmosphère 1.3.2)
### Incident report
In the zip files
### System firmware version
14.1.1
### Environment ?
- rocket
- Atmosphere 1.3.2
- I don't have any sysmodules or kips
- Homebrew software installed: Daybreak, reboot to payload
- Using the EmuMMC partition
I found a way to solve the problem without doing too much manipulation:
From a blank SD card, which will only be used for manipulation, we create an EmuNand, and then once on your EmuNand,
You are updating with daybreak to 14.X.X .
Once the last update is done, take your sd in the computer you open NxNandManager (5.2). You go to PRODINFO, you make a dump of it.
You then insert your SD card with the boot crash error as indicated above, and load your card in NxNandManager.
You go to PRODINFO, you make a dump of it for security.
Then, you right-click on PRODINFO and "restore from file" and you will indicate the PRODINFO that you dumped before on the blank SD card.
Hello ,
I would like your help please. I put below as much explanation as I hope. Thank you
## Switch error report
### What is the problem you encountered?
I bought a switch V1 a year ago on the net with the nand hs. No backup was provided to me because the person did not have to make one.
I bought a complete emmc on Aliexpress and replaced it. I followed a tutorial with a nand donor to make it work, it starts in OFW and CFW.
I wanted to update my EmuMmc from 13.0.0 to 14.1.1 and unfortunately I had a boot crash afterwards.
Stupid as I am, I reversed my sd cards, I had made a backup of my sd card with NxNandManager, but I took the wrong sd card to update.
I made various attempts by creating an Emummc from 13.0.0 and I did update by update and when I get to 14.0.0, I get a boot crash.
I make the decision to update the switch to 14.1.1 via CFW SysNand and I restart it afterwards normally so that the update is official and the efuses burn and I can boot again in CFW EmuNand the sd card which boot crash .
Unfortunately, that didn't change anything.
If I forgot to provide items tell me I will add the information.
### How can the issue be reproduced?
I start the CFW EmuNand console, it crashes after the N* logo.
No problem if I start it in OFW
Error Code : 2105-0584 (0x49069)
Program : 0100000000000025
Firmware : 14.1.1 (Atmosphère 1.3.2)
### Incident report
In the zip files
### System firmware version
14.1.1
### Environment ?
- rocket
- Atmosphere 1.3.2
- I don't have any sysmodules or kips
- Homebrew software installed: Daybreak, reboot to payload
- Using the EmuMMC partition
Attachments
Last edited by momo6t,
