Update: Just wanna say what I did here in my previous post wasnt worth it, boot into hekate, plug your switch into your PC, go to Tools, USB Tools, and click "emu RAW GPP", make sure that Read only is turned on. Now on your PC download NxNandManager, it works on the latest firmware (13.1.0) even though it doesnt specify that it supports anything higher than 12.1.0. Now install the driver in the driver folder (from NXNANDMANAGER) and once that is installed open NxNandManager and goto "file" and then "open drive", double click Hekate or what ever it says and then do a full dump and after you have dumped "emu RAW GPP", "BOOT0", "BOOT1", you can backup the SD Card aswell and then your ready to format. Once you have repartitioned or done whatever you were gonna do make sure you create a partition for your EmuMMC and then go to USB tools and mount "emu RAW GPP" with read and write access, now in NxNandManager you can select the file you restored and click "FULL or PARTIAL RESTORE", once you have restored "emu RAW GPP, BOOT 0 and BOOT1" you can go back to home in Hekate, click emuMMC, Migrate emuMMC, Rix RAW, now click change emuMMC and select the right RAW folder. you should now be able to boot from your new SD Card, Obvoiusly dont forget to transfer all your files back to the SD Card before booting because if you boot without those files Nintendo's servers will be unblocked and you will get banned. Good Luck.
Wanted to say thank you to
@BrandonSWITCH for posting your solution! I had this saved this morning and have been wanting to try it out after seeing the previous post confirm it worked for them, but wanted to reformat it so I could better follow the directions. Figured I'd post it here for everyone else too. Again, thanks
@BrandonSWITCH!
## Re-Formatted:
I backed up my emuMMC partition to convert it to being file-based using EmuTool. I am going to try to restore the backup to a file-based emuMMC in hopes that goes more smoothly than migrating the partition to a new SD card.
Edit: Forgot to say that hopefully this will keep my games installed.
Update: What I did in my previous post didn't work and wasn't worth it. Here's what I did:
1. Boot into Hekate.
2. Plug your Switch into your PC.
3. Go to Tools->USB Tools->"emu RAW GPP", make sure that Read only is turned on.
4. On your PC download NxNandManager (it works on the latest firmware (13.1.0) even though it doesn't specify that it supports anything higher than 12.1.0).
5. Install the driver in the driver folder (from NXNANDMANAGER).
6. Once installed, open NxNandManager.
7. Select "file" then "open drive".
8. Double click Hekate (or what ever it says), then do a full dump.
9. After you have dumped "emu RAW GPP", "BOOT0", "BOOT1", you can backup the SD Card, then your ready to format.
9. Once you have re-partitioned/formatted, Create a partition for your emuMMC.
10. Go to USB Tools and mount "emu RAW GPP" with read and write access.
11. In NxNandManager select the file you restored and click "FULL or PARTIAL RESTORE".
12. Once you have restored "emu RAW GPP, BOOT 0 and BOOT1", Go back to Home->emuMMC->Migrate emuMMC->Fix RAW->Change emuMMC, then select the right RAW folder.
You should now be able to boot from your new SD Card. Obviously don't forget to transfer all your files back to the SD Card before booting because if you boot without those files Nintendo's servers will be unblocked and you will get banned. Good Luck.