@Etheboss, @OverjoY, @obcd, any of you dudes still around by any chance?is there by any chance anyone still around that knows how it works, all the technical details?
Also don't forget that I can't get even this v0.7 neek mod to load at the present time. So even if you replicate all the changes perfectly it may still not work... that being said, because I KNOW it was working once upon a time, the issue may be with something I did to break my personal setup (edit: like maybe updating neek itself? Discussed more below)is there by any chance anyone still around that knows how it works, all the technical details?
@Etheboss, @OverjoY, @obcd, any of you dudes still around by any chance?
--------------------- MERGED ---------------------------
Also don't forget that I can't get even this v0.7 neek mod to load at the present time. So even if you replicate all the changes perfectly it may still not work... that being said, because I KNOW it was working once upon a time, the issue may be with something I've done.
If anyone else is able to help test (I'm thinking of my favourite volunteer right now @alexander1970 lol) these are all things I was thinking to try:
1) do as Daco suggested and install priiloader v0.9, enable logging in priiloader, save, then make a nand backup, extract for use with neek and load it up as per usual. Try booting it via GX and traditional bootmii methods to see if it makes a difference (hold reset while booting neek to try and access neek priiloader). Pro testing tip: after making the nand backup, move some channels on your real nand system menu and change priiloaders background color so that you can easily identify which is loaded. When done obv please share the logs and results here.
2) Download and see if you can get the Priiloader v0.7 neek mod to work. For this you probably want to boot UNEEK and save the installer to SD, and run it from inside uneek. Assuming it installs correctly, see if you can access it by holding reset when booting your emunand. Also try the priibooter app that comes it.
3) similar to above, try manually injecting the neek mod of v0.7 priiloader.app. This is actually super easy because of modmii, just use ModMii's emulated nand modifier to inject it into your Emunand, and test again.
4) I wonder if perhaps this isn't working anymore because of updates to neek2o. I haven't checked yet, but I am curious to compared the release dates for the latest neek2o and the priiloader v0.7 neek mod. Assuming there's a big time difference here, maybe try an older version of neek2o to see if it's failing only because of being run on newer\incompatible versions of neek.
I feel like I had one more idea to try, I'll edit this post if I think of it. And if no one else is able to test before me, I will eventually get around to it, but it may take be a bit.
Lol! I honestly don't know if this meant u would test or if you ain't touching neek with a 10 foot poleNo neek/sneek/meek/bleek....Määäh...
That Thing with the Pole.Lol! I honestly don't know if this meant u would test or if you ain't touching neek with a 10 foot pole
I'm pretty sure a new hacks_hash file with wiimmfi v3 is being worked on by the wiimmfi guys, just be a bit patient
@everyone OK, some bad news - listen up
About the new Wiimmfi patcher - there is a bug that the Wiimmfi team found that is being fixed in all the patchers - the new patch broke worldwide matchmaking in some games.
For those games, another repatch is required. It is not quite ready yet, but we will tell you when it is.
We are very, very, sorry about this.
yes it does : https://github.com/DacoTaco/priiloader/pull/276I heard the following in the rc24 group in discord, and was wondering if anyone knows if the priiloader hacks will need get adjusted again?
So I tested with an old version of neek2o (rev 64) and Priiloader v0.9 loads perfectly. Also, I recently spoke with someone close to the project and confirmed that newer versions of neek2o bypass Priiloader if detected on the EmuNAND. So the latest versions of neek2o today still bypass EmuPriiloader... well at least for now... *fingers crossed*@Etheboss, @OverjoY, @obcd, any of you dudes still around by any chance?
--------------------- MERGED ---------------------------
Also don't forget that I can't get even this v0.7 neek mod to load at the present time. So even if you replicate all the changes perfectly it may still not work... that being said, because I KNOW it was working once upon a time, the issue may be with something I did to break my personal setup (edit: like maybe updating neek itself? Discussed more below)
If anyone else is able to help test (I'm thinking of my favourite volunteer right now @alexander1970 lol) these are all things I was thinking to try:
1) do as Daco suggested and install priiloader v0.9, enable logging in priiloader, save, then make a nand backup, extract for use with neek and load it up as per usual. Try booting it via GX and traditional bootmii methods to see if it makes a difference (hold reset while booting neek to try and access neek priiloader). Pro testing tip: after making the nand backup, on your real nand move some system menu channels around and change priiloader's background color so that you can easily identify whether you're inside your real vs emulated nands. When done obv please share the logs and results here.
2) Download and see if you can get the Priiloader v0.7 neek mod to work. For this you probably want to boot UNEEK and save the installer to SD, and run it from inside uneek. Assuming it installs correctly, see if you can access it by holding reset when booting your emunand. Also try the priibooter app that comes with it.
3) similar to above, try manually injecting the neek mod of v0.7 priiloader.app. This is actually super easy because of modmii, just use ModMii's emulated nand modifier to inject it into your Emunand, and test again.
4) I wonder if perhaps this isn't working anymore because of updates to neek2o. I haven't checked yet, but I am curious to compare the release dates for the latest neek2o and the priiloader v0.7 neek mod. Assuming there's a big time difference here, maybe try an older version of neek2o to see if it's failing only because of being run on newer\incompatible versions of neek.
I feel like I had one more idea to try, I'll edit this post if I think of it. And if no one else is able to test before me, I will eventually get around to it, but it may take me a bit.
when installing a binary from priiloader it also saves the arguments to nand. when loading it from nand it also loads the arguments back in.Thanks! There was just 1 thing I didn't get from the changelog: fixed loading dol/elf arguments from nand if there are none
First, how does one load arguments from nand? And if if there are no arguments, how can they be fixed?
Thanks for this release!