Hi! I gave up looking for a European shop for SX Core/Lite. Most of them were shipping from China anyway, so I went on and ordered one from AliExpress. (Look for YF-... shop on page #109 in this thread). It came reasonably fast. (25 days) via NL Post, Customs Free.
Cheers.
Still waiting for my chip from China, it arrived in Greek customs on the 19/7, then was forwarded to the post office on the 28/7 and still haven't received it yet (in Athens).
This is what the chip doe to ribbon cables now, the new switch i installed his old modchip is just fine only the modchip now likes to eat ribbon cables (it burns them) at first as you can see it nicely green lighted, after 20% into the nand dump it went off.. couple of anxiety farts came out and I thought well i could try a new spare v2 cable again to see if i'm not going crazy, the exact same thing happend.. desolderd everything switch is fine, told him his chip was evil and doomed because of his work and is now in search of a new chip, he explained to me he got angry when installing his chip at one point (he has add he says) and that's why his switch ended up like that (atleast that is what he says) it was a rollercoaster of doomed pics from him and a doomed chip that was perfectly installed from my side but likes to eat ribbon cables.. it kept me up till 2 in the night
Attachments
Last edited by JethronicS,
I aint messing with that chip no more, i think he damaged the chip somehow, it seemed fine by the looks (only the debug was a bit black but i thought well ill give it a shot) it green lighted perfectly and at around 20% into nand dump it failed, 2 times with 2 different ribbons its defo the chip, it gets real hot at the qsb connectors somehow. I'm not in doubt of my own install, i have done 47 installs none of them failed, i'm a trusted professional installer, this was just due to bad chip, luckely he was very understanding and explained it al to him, desolderd and cleaned up his new switch wich works just fine, and he is now in search of a new chip
Hi again! just wanted to give an update.
I bought the aliexpress SX lite from the link that matias3ds kindly shared, and just contacted the seller via chat. Asked if they really have the sx products and after they confirmed I bought it. They even sent me two analog sticks for the lite for free.
I had to use EMS as the only method availablefor shipping (I´m from Argentina) which is very expensive but it was the only way. It arrived after 4 weeks which is ok.
Everything was ok with the package, even the gifts.
So it is doing the emunand now
It was REALLY difficult and stressful to install... but made it.
TIPs:
Thanks matias3ds for the link!
I bought the aliexpress SX lite from the link that matias3ds kindly shared, and just contacted the seller via chat. Asked if they really have the sx products and after they confirmed I bought it. They even sent me two analog sticks for the lite for free.
I had to use EMS as the only method availablefor shipping (I´m from Argentina) which is very expensive but it was the only way. It arrived after 4 weeks which is ok.
Everything was ok with the package, even the gifts.
So it is doing the emunand now
It was REALLY difficult and stressful to install... but made it.
TIPs:
- don´t use metal thermal paste, it is conductive and you can make a mess.
- use electric tape to insulate the processor caps after soldering to prevent the thermal paste spreading over them
- solder everything as it should, then test THEN assemble.
Thanks matias3ds for the link!
You mean alligator/gator clip? Or simply a (bench) vice? Would be more accurate if you have a picture to show.
I think he wants a pcb holder, i use this one for switch mb https://www.aliexpress.com/item/32871201128.html?spm=a2g0s.9042311.0.0.27424c4dbq42td
Yes thank you exactly what i was looking for. Also do you know a lot about usb c connector repair? i repplaced one and now it is charging but only when the usb c is one direction but not the other?
First check if all pins are soldered, i use a bare 24 pin usb c male connector to test continuity from mb to conector, create a help thread for you problems or use searche button probably is answered already.
Last edited by Modificatorul,
Does gbatemp have a search feature i have been here for a year and never seen one and i appreciate the help.
What are you testing each wire too? how are you testing the hidden row? Thanks for the help
Here you go https://gbatemp.net/threads/breakout-board-for-testing-the-usb-c-port-on-the-nintendo-switch.563631/
And is a Like button to if you would like to like my post
Last edited by Modificatorul,
Thank you. Also this is the specific one i was looking for but yours works tooHere you go https://gbatemp.net/threads/breakout-board-for-testing-the-usb-c-port-on-the-nintendo-switch.563631/
And is a Like button to if you would like to like my post
Last edited by Modificatorul,
You are to kind again , i just whant to achive @ModderFokker619 quality and swim to America.
i wanna swim to anywhere but egypt
I cant find a decent soldering tip, all shitty 1 dollar cheap chineese shit
