Yes it works just fine but remember only flushable from a 2GB card only then after that I have to use 4GB or higher cardhi, can i use last "EZ4 Kernel 2.05" (2018) on my old EZ4 white MiniSD (firmware 1.73)? or it can brick the card?
ezflash .cn / download
damn! i have only MiniSD of 512MB.
thx anyway.
Yes 2.x fw requires 4GB aka SDHC it will not boot with Non-SDHCwith firmware 1.73 minisd 512MB works, i'm using it now. but maybe with new firmware 2.0 works only minisd SDHC (4gb or higher), right? it's ridiculous!
Read the thread next time kthxIt's max 2GB. You can use smaller minisd card.
with firmware 1.73 minisd 512MB works, i'm using it now. but maybe with new firmware 2.0 works only minisd SDHC (4gb or higher), right? it's ridiculous!
Well after I updated to 2.05 my 2GB MiniSD card quit booting all the way to the menuNo it's not like that. I'm using standard, 2GB microSD card (with miniSD adapter) on my first generation EZ-Flash IV (firmware v. 2.05) and everything is good.
Thats good for youMy set-up is an old EZ-Flash IV MiniSD with a Kingston 1 GB MiniSD (i.e. it's not an SDHC card) - managed to update to 2.05 no problem, everything works perfectly...
ExactlyThats good for you
In general, the SDHC compatible updates (1.75+) have decreased the compatibility with non-SDHC cards massively. You're generaly expected to lose compatibility with non-sdhc cards, you're one of the lucky few if you don't.
Note that the older cards, even though they are now SDHC compatible, can still only be updated with a non-sdhc card, because the bootloader that takes care of the update remains untouched (to not risk bricks).
This gives me hope. I have a Kingston 1GB MiniSD in mine, (Not microSD with adapter like most people, but an actual MiniSD card) and I want to keep using it.My set-up is an old EZ-Flash IV MiniSD with a Kingston 1 GB MiniSD (i.e. it's not an SDHC card) - managed to update to 2.05 no problem, everything works perfectly...