Does anyone have a backup for the Switch's 8.0.1 version of the NAND? I updated my switch to firmware 9.1.0 and usually I always make backups of the NAND except this time and now my Switch is bricked with no idea if the backup I have is going to work. I have SX OS, I can start the bootloader but as soon as I press the Boot CFW button the switch is stuck on a black screen.
You can't use other people NAND backup, as for what you can try is replacing the SX OS file with a fresh one, switch from exFAT to FAT32 and try again, worse case you might have to rebuild your NAND via Choidujour, if you have your keys, you might be luck out if you never obtained your key or if your NAND is no good.
wait i got the keys backup how do i restore it from choidujour?
--------------------- MERGED ---------------------------
that's the thing i don't remember if i've booted up in the ofw and burned the fuses so i'm not sure if the backup i have works
Well if you have another SD card, use in FAT32 format with the boot.dat and the license file, see if it boot, exFAT has corruption problem.
Just don't use exFat ppl...
If you updated without selecting exFat support you can not boot with an exFat microSD.
Like advised many times before, format your SD card to FAT32 and try again.
If it doesn't work, DUMP YOUR CURRENT NAND FIRST before you restore some shit to it...
If you updated without selecting exFat support you can not boot with an exFat microSD.
Like advised many times before, format your SD card to FAT32 and try again.
If it doesn't work, DUMP YOUR CURRENT NAND FIRST before you restore some shit to it...
Similar threads
