Experience Android on your Switch, with the first publicly released version of LineageOS 15.1

https___pbs.twimg.com_media_D9.jpg

Being true to their promise, switchroot has released their highly anticipated method of bringing Android to your Nintendo Switch console. This marks the first public release of LineageOS 15.1, and is based on a build of Android that runs on the Nvidia Shield TV. By flashing the installation image to your micro SD card, you can use Android 8.1 Oreo on the Switch, in both handheld and docked mode. Some of the features include audio support, allowing the Joy-Cons to connect through bluetooth, offering CPU and GPU performance profiles, and more.

As this is a beta release, you should be aware that there are a few bugs. Some notable issues are that sleep mode battery life is lacking, certain apps have problems with being controlled with the Joy-Cons, the screenshot function is disabled, wifi can be spotty, and a few other quirks.

If you're interested in playing around with this release, you can follow the instructions below to get started, with the download links being available in the source.

LineageOS 15.1 for Nintendo Switch by switchroot. This is the first publicly available Android ROM for the Nintendo Switch. Based on the Nvidia Shield TV builds it brings a smooth and powerful Android experience to your Switch in both handheld and docked mode.
  1. Pick the image that corresponds to the size of your SD card. You can use an image that is smaller than your card. You’ll end up with the remaining space unused on your card.
  2. Write the image to your SD card with e.g. balenaEtcher Do not extract the image, Etcher can handle the compressed image just fine! WARNING: This will overwrite any contents on your card! The progress bar/percentage might go haywire in Etcher, but you can ignore that. The flashing will still work and Etcher will let you know when it’s done. It can take up to an hour depending on your SD card’s speed. Also make sure not to format any of the partitions when Windows prompts you to after flashing.
  3. Download GApps for Android 8.1. from OpenGApps, use ARM64. Put the file on the first partition of your new SD card
  4. If desired download the "Shield-ifier" zip and place it also on the SD card. This will make your Switch identify as Nvidia Shield TV and install the Nvidia app.
  5. Load hekate and boot to TWRP by holding VOL+ when you select the Android config.
  6. Flash GApps zip, optionally flash other zips
  7. Reboot to hekate and boot into Android
  8. Complete the inital setup. For the Nvidia app to work make sure to update it from Play Store!

:arrow: Source
 

phillyrider807

Well-Known Member
Member
Joined
May 2, 2009
Messages
447
Trophies
1
XP
1,402
Country
United States
Ok been messing around with this since this morning and everything is working pretty smoothly. Awesome work.

Set battery to quick or performance and it wont be so sluggish.
Moonlight streaming works great. Tried it with official steam games and non official and they all worked(DMCV,RE2,NIER AUTOMATA,. The buttons are swapped on the joycons though which is annoying but im sure that will be fixed in due time.
Downloaded Bubbleupnp and Mxplayer and it played everything i threw at it. So awesome to finally have a media player on the switch now.
For some strange reason netflix would not show up in google play. So i just downloaded the apk from online. Seems to work fine although obvious 420 p limitation. I can continue my shameless bingewatch in bed now!
Drastic DS emulator ran full speed
Reicast emulator ran full speed with the few games i tested(SA2/Crazy Taxi 2)
Only way to add/transfer files seems to be through wifi atm.
 
Last edited by phillyrider807,
  • Like
Reactions: Zumoly

Tenshi_Okami

Well-Known Member
Member
Joined
Nov 3, 2015
Messages
1,490
Trophies
0
Age
25
XP
1,616
Country
Puerto Rico
Ok been messing around with this since this morning and everything is working pretty smoothly. Awesome work.

Set battery to quick or performance and it wont be so sluggish.
Moonlight streaming works great. Tried it with official steam games and non official and they all worked. The buttons are swapped on the joycons though which is annoying but im sure that will be fixed in due time.
Downloaded Bubbleupnp and Mxplayer and it played everything i threw at it. So awesome to finally have a media player on the switch now.
For some strange reason netflix would not show up in google play. So i just downloaded the apk from online. Seems to work fine although obvious 420 p limitation. I can continue my shameless bingewatch in bed now!
Drastic DS emulator ran full speed.
The netflix thing is probably cause this android port does not pass safetynet. Haven't checked with Magisk but it could bypass it
 
  • Like
Reactions: phillyrider807

KongsNutz

[Team Oceanic]
Member
Joined
Jul 19, 2008
Messages
1,680
Trophies
1
XP
1,594
Country
United States
So, if you get Google services stopps all the time it's because you booted into android (not twrp)before installing open gapps.
Reflashed and it's all good now
 
  • Like
Reactions: SmashinGit

guily6669

GbaTemp is my Drug
Member
Joined
Jun 3, 2013
Messages
2,347
Trophies
1
Age
34
Location
Doomed Island
XP
2,133
Country
United States
It was cool if they could unlock Borderlands 2 from the Nvidia shield and all its other games later which still havent gone to the switch console.

It's also cool having android for like Xcom which is just stupid how it has never arrived on the Switch yet too, I have played a bit of achtung cthulhu tactics and its pretty booring, most levels look the same over and over grrrrrr...

Waiting for ever for Phantom Doctrine which I could have already played in the PC but I'm leaving it for the switch.
 

Tafty

Well-Known Member
Member
Joined
Sep 23, 2016
Messages
116
Trophies
0
Age
36
XP
923
Country
So ive been doing some initial testing and thought some of you guys would be interested.

-Plex is great!!! and even at 720p videos look nice and crisp. its also direct playing files from my server(without transcoding) I also have the live TV+DVR functionality on my Plex server and that works too, which im surprised at as it cripples lesser devices(fire stick for exampe)

gamestream works really well for me, however i am using a netgear nighthawk XR500, so your milage may vary. the button layout is currently wrong, so buttons are flipped(A/B,X/Y) but that should be easy to fix(on either the pc or the switch side)

Bluetooth speaker connected fine and works as expected, so did my pro controller, i suspect it will support any Bluetooth device to be honest but will do more testing tomorrow as its 1am UK

i was getting alot of google service crashes, but they have calmed down in the past half hour, as the device has sync'd my google settings from the cloud and updated my apps, so anyone else experiencing them i would suggest just give it chance to catch up with itself.

yes there is bugs, but so far its very promising.
 

Pleng

Custom Title
Member
Joined
Sep 14, 2011
Messages
2,442
Trophies
2
XP
2,820
Country
Thailand
Might be time to find out if my Switch is hackable. I don't have a great deal of Switch games so hopefully I can fit them all on the internal storage and dedicate an SD card to Android.
 

wiewiec

Well-Known Member
Member
Joined
Dec 24, 2015
Messages
774
Trophies
0
Age
39
Location
Somewhere
XP
1,373
Country
Poland


I have subscribed this guy channel some timer ago, but what he said on this video is damn stupid since he provided lot of tutoriale for psp etc. Now he is happy to have android to play with Instagram and Snapchat not for games since it is gamę console and he not Play games.
 
D

Deleted User

Guest
Could someone please confirm whether or not it is possible to map touch controls to the joy con buttons? If it is possible, is there a turbo/rapid fire mode?
 

Anfroid

Well-Known Member
Member
Joined
Sep 30, 2011
Messages
530
Trophies
1
XP
2,323
Country
United States
When it did work, how long was it on the black screen before you saw life?
I left mine "loading" for 3 hours and it didn't ever work.
I just kept booting into hecate and then into android till it worked. I have autoRCM and plugged the switch to my phone to keep it going into hecate constantly until it worked. I didn't have any long periods of black screen.
 

Zumoly

GBATemp Analyst
Member
Joined
Apr 27, 2018
Messages
1,818
Trophies
0
Location
Yorosso
XP
3,128
Country
Mali
Could someone please confirm whether or not it is possible to map touch controls to the joy con buttons? If it is possible, is there a turbo/rapid fire mode?

Didn't come across such app or setting yet.
Joy cons get connected to the Switch like it does to any other android device except there is no lag.
 
  • Like
Reactions: Deleted User

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    Veho @ Veho: Looks like Link's Awakening was metaphorical.