- if you ever boot a higher firmware without rcm (either manual rcm with a jig or autorcm) and burn fuses it'll be pointless to downgradeI would like to remove auto rcm after upgrading to 6.0.1 (choixdujour)
Have i to get back to my previous/original firmware version (official 5.1) ?
Also, i had a joycon update. Is it an issue if i get back to 5.1.
------------
Bonus question :
I'm not sure i understand this FAQ :
Q: I've never run firmware 4.0.0 or higher on my switch, so my gamecard controller firmware is still not updated. How do i make sure my gamecard controller works after i downgrade back to < 4.0.0 ?
A: When flashing the firmware image for any 4.0.0 or later firmware, ChoiDujourNX will generate a protective hekate_ipl.ini on your microsd, with a "PreventGCUpdate" launch target. You must ALWAYS boot using this launch target (or add kip1patch=nogc to any launch target you wish to use in the future) and use a Hekate that supports the kip1patch option (releases here do: https://github.com/rajkosto/hekate/releases) if you want to prevent use and updating of your GC controller firmware on firmware versions 4.0.0 and up.
It seems like I fucked up few thing with ReiNX, hekate and "PreventGCUpdate".
- I ran SXOS after Choixdujour update
- ReiNX/atmo didn't work
- I can't find "PreventGCUpdate" on the card while i remember having seen it once in Caeter menu (did not boot anyway )
Can you confirm that it is not a issue for me (because i can't downgrade below 5.1) ?
- updated joycon will work on any firmware
- if you've ever booted 4.0.0 or higher with an active gamecard slot then your gamecard slot is already updated and the point is moot