Hacking Paperclip RCM "jig"

Clydefrosch

Well-Known Member
Member
Joined
Jan 2, 2009
Messages
6,025
Trophies
2
XP
4,632
Country
Germany
Just bend my future modkit. It is kinda tricky to get it to hit the right pins, but with a flashlight you can take a look inside and fit the clip in perfectly.

For everyone using metric system:
View attachment 121499 View attachment 121500 View attachment 121501

The dent is a tight fit to be big enough to hold it's place, but not too big to fit at all... Try to make it exactly 2mm, a little more than on my picture and it will be perfect

you might want to file down some of the sharp edges around where you clipped the paperclip.
 

Clydefrosch

Well-Known Member
Member
Joined
Jan 2, 2009
Messages
6,025
Trophies
2
XP
4,632
Country
Germany
This part only hits the bottom of the rail, so it can't do any harm.
It actually can be quite difficult to file them without destroying the bend :O

i was thinking more about scratches to the rail while inserting and sliding down than actually destroying anything. that said, its probably better to file before you bend or before you find the perfect shape, yes.
but if you just carefully file the tips individually with a nail file, they shouldn't really bend out of shape.
 

nasune

Well-Known Member
Member
Joined
Sep 13, 2009
Messages
752
Trophies
1
Age
36
XP
1,357
Country
Netherlands
I just tried this, and can anyone confirm whether it's correct that without an USB cable it boots into the recovery menu (aka am I doing this correctly)?
 

Lacius

Well-Known Member
Member
Joined
May 11, 2008
Messages
18,099
Trophies
3
XP
18,338
Country
United States
I just tried this, and can anyone confirm whether it's correct that without an USB cable it boots into the recovery menu (aka am I doing this correctly)?
If the Switch looks like it doesn't come on when you hold Volume+ and the power button, then you probably entered RCM.
 

nasune

Well-Known Member
Member
Joined
Sep 13, 2009
Messages
752
Trophies
1
Age
36
XP
1,357
Country
Netherlands
If the Switch looks like it doesn't come on when you hold Volume+ and the power button, then you probably entered RCM.
I that case I must be doing something wrong, because I'm getting the recovery menu instead.
IMG_20180430_010507.jpg
Sigh, I'm not gonna lie this is getting frustrating. After printing both kinds of jigs twice to no avail, and now this one not working properly I'm getting close to throwing in the towel and just solder the pins in the joycon.
 

H1B1Esquire

RxTools, the ultimate CFW machine.
Member
Joined
Nov 2, 2016
Messages
3,732
Trophies
1
Age
36
Location
Earth, bro-dude.
XP
2,868
Country
United States
OP, will you please do a tiny bending services thread?:creep:

Seriously, if you could go a little more in-depth, like the specific brand of paper clip, that would 100% me.

-----

I that case I must be doing something wrong, because I'm getting the recovery menu instead.

I think you're pressing "+ and -" instead of "+".
 
Last edited by H1B1Esquire,

Resaec

Well-Known Member
Member
Joined
Dec 19, 2017
Messages
409
Trophies
0
XP
885
Country
Germany
1-10 paperclip into the right rail, check from above that it touches and then button-magic
Soldering is the worst idea... also detectable (this is a dispute topic)
 

nasune

Well-Known Member
Member
Joined
Sep 13, 2009
Messages
752
Trophies
1
Age
36
XP
1,357
Country
Netherlands
... Goddammit, it's the plus button rather than the minus isn't it. In my defence I actually read that it was minus at some point. Still both jigs and the paperclip method work beautifully now. I'm still not sure how I got into the other menu but, quite frankly, at this point I don't care, something finally works as it should.
 
  • Like
Reactions: H1B1Esquire

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    Psionic Roshambo @ Psionic Roshambo: Yesterday I learned my BD Burner drive can burn CD's at 56X lol